Session token cache drops every token when the device clock runs fast, so the poller mints a token every 1.5 s (fast-clock side of #10401)
維護者通常 1 天內回覆
還沒有人認領這個 Issue。
- #10583 來自 @umeraamir69 —— 已關閉,未合併
評估
- 難度
- 4/5
- 預估耗時
- 3-5 天
- 新手友好度
- 28/100
- Issue 類型
- 缺陷
- 描述清晰度
- 基本清楚
- 活躍度
- 活躍
- 技術堆疊
- javascript, typescript
研究方向
The bug sits in the session token cache, where expiresAt is computed as Math.min(l.exp, n.createdAt + l.exp - l.iat), and in startPollingForSessionToken, which calls session.getToken() every 1500 ms or 5000 ms. Reproduce by overriding Date.now to add about 200 s and watching for repeated POST …/tokens calls. Done means a freshly minted token stays cached under a fast clock, but the issue leaves the fix approach open, so confirm the direction with maintainers first; the linked PR #10583 was closed without merging.
由索引模型根據 Issue 內容生成。
描述
Packages
@clerk/clerk-js6.42.1 (latest; same in 6.42.2-canary.v20261102095039). Same effect in 6.41.0, 6.7.5 and 6.3.3.- Loaded via
@clerk/vue2.0.7 and@clerk/react6.14.x (CDN@clerk/clerk-js@6), and bundled directly.
What happens
When the device clock runs about a minute or more fast, clerk-js discards every session token as soon as it is cached. Every getToken() call and every poller tick then goes to POST /v1/client/sessions/{id}/tokens.
Measured with one focused tab and the clock 200 s ahead: 43 token POSTs in 71 s, versus one every ~44 s with a correct clock. With about ten tabs open the Frontend API answers 429, getToken() keeps retrying (up to 8 times online, ~160 s), and anything that waits for a token stalls.
This is not theoretical: within four days we saw two production clients whose clocks were +198 s and +224 s off (one after a laptop battery had run completely flat).
Reproduction
- Sign in to any app that uses clerk-js 6.42.1.
- Set the OS clock ~3 minutes ahead, or in DevTools:
const real = Date.now.bind(Date); Date.now = () => real() + 200_000; - Keep the tab focused and watch the network panel:
POST …/tokensabout every 1.5 s (every 5 s when the tab is not focused).
Cause
In 6.42.1 the cache entry is created with createdAt: Math.floor(Date.now() / 1e3) and stores
expiresAt: Math.min(l.exp, n.createdAt + l.exp - l.iat)
and both the read path and the eviction timer compare it with the device clock (expiresAt - Math.floor(Date.now() / 1e3), evict at <= 5 / <= 0). With a fast clock localInsert + lifetime is later than exp, so min() picks the server exp, and exp - localNow is already negative (or below the 5 s buffer) at insert. The entry is dropped at once. Before 6.42 the check was (exp - iat) - (localNow - iat) <= 5, which has the same effect.
The poller (startPollingForSessionToken, 1500 ms while document.hasFocus(), else 5000 ms) calls session.getToken() on every tick, so every tick mints a token. Focus and visibilitychange refreshes add more.
#10401 states this directly ("Fast clocks behave as before") and notes that the clock offset cannot be measured in the browser because FAPI does not expose Date cross-origin. #10361, which would have aged tokens from the local insert time, was closed in favour of #10401.
Suggested fix
Any of these would make a fast clock harmless:
- For a token this client has just minted (response of
POST …/tokens), judge freshness by local elapsed time since insert against the token lifetime (exp - iat), as in #10361. Keep the currentmin()behaviour only for tokens that arrive already aged (hydratedlastActiveToken, another tab's broadcast), which is the case #10401 was protecting. - Or estimate the clock offset once from a freshly minted token (
localInsert - iat, accurate to about the request time) and use it in everyDate.now()comparison of the token cache and poller. - Or add
Dateto the Frontend API'sAccess-Control-Expose-Headers, so the SDK can measure the offset from any FAPI response.
As a workaround we are moving our GraphQL auth links to a token cache of our own that ages tokens with the monotonic clock since receipt, so our own requests stop depending on the device clock. The poller and focus refresh inside clerk-js still mint at the rates above, and only a fix in clerk-js can stop that.
- 主要語言
- TypeScript
- 星號
- 1.8k
- 分支
- 492
- 平均合併
- 1 天 7 小時
- 30 天內合併 PR
- 357
環境準備
- 沒有 Dockerfile 或 Docker Compose 檔案
- 有 Pull Request 範本
- 閱讀貢獻指南
從這裡開始
- 先讀完整個 Issue,再讀專案的貢獻指南。
- 在 Issue 下留言說明你要接手 —— 這能避免兩個人做同樣的事。
- Fork 儲存庫,在一個分支上完成修改。
- 送出 Pull Request,並在描述裡引用這個 Issue 編號。
clerk/javascript 的其他 Issue
-
難度 2/5 1-3 小時 新手友好度 85/100
clerk/javascript#10708 ·
維護者通常 1 天內回覆
-
Built-in reverification dialog lacks an accessible name (aria-dialog-name)可能已有人在做 關聯的 PR 仍在進行中或已合併。 未關閉
難度 2/5 1-3 小時 新手友好度 75/100
clerk/javascript#10548 ·
維護者通常 1 天內回覆
-
難度 2/5 1-3 小時 新手友好度 84/100
clerk/javascript#10547 ·
維護者通常 1 天內回覆
-
<SignIn />: first "Use email" click switches back to phone when `initialValues.phoneNumber` is set可能已有人在做 @twicestruck 於 20 天前認領。 未關閉
難度 2/5 1-3 小時 新手友好度 74/100
clerk/javascript#10487 ·
維護者通常 1 天內回覆
-
useLoadedIsomorphicClerk misses "ready" when a ClerkProvider remounts after clerk-js has loaded — <ClerkLoading> never resolves可能重新可做 關聯的 PR 已關閉且未合併。 未關閉
難度 2/5 1-3 小時 新手友好度 82/100
clerk/javascript#10462 ·
維護者通常 1 天內回覆
相似的 Issue
-
bot:ai-assisted component:platform-js status:untriaged
難度 1/5 1 小時以內 新手友好度 74/100
midnightntwrk/platform-js#38 ·
-
難度 2/5 1-3 小時 新手友好度 68/100
ranxianglei/billion-context#7068 ·
維護者通常 1 天內回覆
-
難度 2/5 1-3 小時 新手友好度 78/100
mybigday/whisper.rn#348 ·
-
enhancement severity:low
難度 2/5 1-3 小時 新手友好度 82/100
Battle-Cattle/BCUK-Bot-4#1075 ·
維護者通常 1 天內回覆
-
難度 2/5 1-3 小時 新手友好度 67/100
ilan-pinto/roaring-lions#1552 ·
維護者通常 1 天內回覆