Extraction of MessageQueue full via variable Bug in msg getting duplicated.
還沒有人認領這個 Issue。
評估
- 難度
- 4/5
- 預估耗時
- 3-5 天
- 新手友好度
- 35/100
- Issue 類型
- 缺陷
- 描述清晰度
- 基本清楚
- 活躍度
- 停滯
- 領域
- networking, robotics
研究方向
Start with ROSConnection and the outgoingQueue loop that calls OutgoingMessageSender.SendInternal, then reproduce the message drops and duplication described under Docker and Linux. Trace the Normal and QueueFullWarning states and compare the observed behavior with the reported queue-full flag workaround. Done means the queue condition and delivery behavior are understood and the issue's loss or duplication is resolved without requiring the workaround.
由索引模型根據 Issue 內容生成。
描述
Is your feature request related to a problem? Please describe.
Right now it seems that when messages are too large at some point messages get dropped however only a Debug msg ("Queue full! Messages are getting dropped!) gets displayed.
Additionally it seems that message get published then sometimes multiple times instead of just once even so the publish function was not called multiple times
This is a kinda critical bug as it will effect algorithms working with the data
Having a flag which can be check to then pause simulation/ publishing untill all message got delivered would be helpfulable.
I implemented that feature as show below.
I additionally have a subscriber on the rosside now to check that all message got delivered, then publishes a msg which gets received on unity side and only then let simulation continue,
as otherwise i always lost data at some point.
This issue seems to happen when i use it with a docker as the ros side, however under linux the issue of duplicating message also presist but i didnt observe message drops.
Describe the solution you'd like
I implement that feature in the following way i added to ROSConnection
[SerializeField]
static bool m_queuefull=false;
public bool queuefull { get => m_queuefull; set => m_queuefull = value; }
public bool Queue(){
return queuefull;
}
furthermore at the line
int count=0;
while (outgoingQueue.TryDequeue(out OutgoingMessageSender sendsOutgoingMessages))
{
OutgoingMessageSender.SendToState sendToState = sendsOutgoingMessages.SendInternal(messageSerializer, networkStream);
switch (sendToState)
{
case OutgoingMessageSender.SendToState.Normal:
//This is normal operation.
count=count+1;
//this must always be +1 one than your queue size otherwise the stuff gets stuck
//queue size should always be at least 1 larger than the amount of message you have in one go.
if(count >=4){
ROSConnection.m_queuefull=true;
}
Debug.Log("called"+count);
break;
case OutgoingMessageSender.SendToState.QueueFullWarning:
//Unable to send messages to ROS as fast as we're generating them.
//This could be caused by a TCP connection that is too slow.
Debug.LogWarning($"Queue full! Messages are getting dropped! " +
"Try check your connection speed is fast enough to handle the traffic."+count);
ROSConnection.m_queuefull=true;
break;
case OutgoingMessageSender.SendToState.NoMessageToSendError:
//This indicates
Debug.LogError(
"Logic Error! A 'SendsOutgoingMessages' was queued but did not have any messages to send.");
break;
}
token.ThrowIfCancellationRequested();
waitingSinceRealTime = s_RealTimeSinceStartup;
}
ROSConnection.m_queuefull=false;
By this we can read out if the msg queue is full in any program for example via:
ros = ROSConnection.GetOrCreateInstance();
bool rosqueuefull =ros.Queue();
Describe alternatives you've considered
Additional context
Add any other context or screenshots about the feature request here.
- 主要語言
- C#
- 星號
- 2.6k
- 分支
- 473
- PR 合併指標
- 30 天內沒有已合併 PR
環境準備
- 沒有 Dockerfile 或 Docker Compose 檔案
- 有 Pull Request 範本
- 沒有貢獻指南
從這裡開始
- 先讀完整個 Issue,再讀專案的貢獻指南。
- 在 Issue 下留言說明你要接手 —— 這能避免兩個人做同樣的事。
- Fork 儲存庫,在一個分支上完成修改。
- 送出 Pull Request,並在描述裡引用這個 Issue 編號。
Unity-Technologies/Unity-Robotics-Hub 的其他 Issue
-
難度 3/5 1-2 天 新手友好度 35/100
-
ROS2,Action未關閉
難度 4/5 3-5 天 新手友好度 25/100
-
難度 1/5 1 小時以內 新手友好度 20/100
-
難度 5/5 一週以上 新手友好度 15/100
-
難度 4/5 3-5 天 新手友好度 25/100
Unity-Technologies/Unity-Robotics-Hub#433 · 1 則留言 ·
查看 Unity-Technologies/Unity-Robotics-Hub 的全部 Issue
相似的 Issue
-
bug
難度 2/5 1-3 小時 新手友好度 72/100
維護者通常 3 天內回覆
-
bug python
難度 1/5 1 小時以內 新手友好度 88/100
ilia-sokolov/OfficeAgent.NET#89 ·
維護者通常 13 天內回覆
-
documentation
難度 2/5 1-3 小時 新手友好度 82/100
juandresrodca/AdminForge#66 ·
維護者通常 1 天內回覆
-
難度 2/5 1-3 小時 新手友好度 70/100
維護者通常 1 天內回覆
-
難度 2/5 1-3 小時 新手友好度 72/100
umbraco/Umbraco.Automate#612 ·
維護者通常 1 天內回覆