Follow-ups left open by #452 and #454 (radiotap ACK request / MT7612U retries, station core)

未關閉
#456 0 則留言 0 個 reaction 已指派 0 人 在 GitHub 檢視

維護者通常 1 天內回覆

還沒有人認領這個 Issue。

評估

難度
5/5
預估耗時
一週以上
新手友好度
15/100
Issue 類型
功能
描述清晰度
基本清楚
活躍度
活躍
技術堆疊
c
領域
networking

研究方向

This issue tracks several independent follow-ups rather than one bounded change. Start with the relevant entry points named in the issue, such as RtlJaguarDevice.cpp, src/mt7612u/tools/bringup.cpp, and docs/mt7612u-tx-retry.md, and confirm with the maintainers which item is still wanted before starting. Done depends on the selected follow-up; the issue spans driver behavior, station-core integration, protocol security, and missing test coverage.

由索引模型根據 Issue 內容生成。

描述

enhancement

Follow-ups the two PRs named or left open, so they are tracked somewhere other than the merged descriptions.

From #452 (radiotap ACK request + MT7612U retry limit, 8a47362)

  • Port the radiotap TX_FLAGS NOACK / ACK-request choice to the Realtek TX descriptors: Jaguar1 first (BMC is unconditional there, RtlJaguarDevice.cpp), then Jaguar2/3, Kestrel and the RTL8733B, so build_stream_radiotap(mode, false) means the same thing on every backend. Today only the MT7612U reads the bit.
  • examples/chanmig becomes the first in-tree no_ack=false consumer as soon as it sends any frame unicast to the peer's responder address (everything it builds today is a broadcast probe request, so NOACK is correct there).
  • The ~20 ms per-frame cost of one-way unicast injection on the MT7612U is not the retry ladder (0 retries measured off MT_TX_STAT_FIFO) and is still unexplained; candidates not yet separated: per-WCID serialization with the 0xff no-station index, TXOP/EDCA admission for a unicast RA, lazy USB completion. docs/mt7612u-tx-retry.md "The open question".
  • The one-step TX-status lag in mt7612uprobe txs (status visible only after the next submit vs an EXT/FIFO pairing off by one) is characterised but not explained.
  • Nit: txs_parse_long in src/mt7612u/tools/bringup.cpp carries a stale duplicate comment block above it (the first one describes txs_retry_limit_env).
  • The NOACK-vs-ACK delivery table (0/5386 lost with ACKs requested) came from an associated-client harness + AP-side ledger that are not in the tree; make it reproducible once a station consumer lands.

From #454 (device-free station core, 956e723)

  • A consumer: nothing in the tree drives StationSm against a radio yet. DupDetector and msdu_to_eth/eth_to_msdu have no in-tree caller either, and the data-plane caller must run one duplicate cache per transmitter itself.
  • AP-side multi-station table (per-station PTK, TX PN, replay state), deliberately left out.
  • CcmpReplay window is 64 PNs (HT/VHT BlockAck); must be widened before any HE/EHT peer negotiating 256/1024.
  • The IEEE 802.11-2016 Annex J.4 CCMP vector is still not in the tree (copy from the standard or hostapd's wlantest vectors, never from memory); the kernel captures are an interop reference, not the spec.
  • No captured hostapd group rekey; that path is pinned only by the same-author fixture.
  • PMF / 802.11w: an MFP-required BSS is not selected and deauth/disassoc are accepted unauthenticated.
  • A forged message 1 replaces the single in-flight candidate PTK (same exposure as wpa_supplicant's TPTK); during a PTK rekey on an established link it can cost the link.
主要語言
C
星號
56
分支
29
平均合併
3 小時 43 分鐘
30 天內合併 PR
75

環境準備

這個專案沒有提供開發容器、Dockerfile 或貢獻指南,環境需要你自己搭建:先看它的 README,通用步驟見我們的新手貢獻指南。

從這裡開始

  1. 先讀完整個 Issue,再讀專案的貢獻指南。
  2. 在 Issue 下留言說明你要接手 —— 這能避免兩個人做同樣的事。
  3. Fork 儲存庫,在一個分支上完成修改。
  4. 送出 Pull Request,並在描述裡引用這個 Issue 編號。

OpenIPC/devourer 的其他 Issue

查看 OpenIPC/devourer 的全部 Issue

相似的 Issue

更多 C Issue

把新 issue 寄到你的電子郵件信箱

精選適合新手參與的 GitHub issue 摘要。