What should i use for this

未關閉
#156 11 則留言 0 個 reaction 已指派 0 人 在 GitHub 檢視

還沒有人認領這個 Issue。

評估

難度
4/5
預估耗時
3-5 天
新手友好度
35/100
Issue 類型
缺陷
描述清晰度
基本清楚
活躍度
活躍
技術堆疊
cpp
領域
embedded-iot

研究方向

Start by identifying the exact device and board revision from the photos and confirm which firmware image and SD card layout support GA-36MB v1.2. The report says two SD cards and a backup image both fail, while the red LED turns on but the power button has no effect. Compare those symptoms with the project's setup and troubleshooting guidance; done means identifying a supported recovery path or the missing device details needed to diagnose it.

由索引模型根據 Issue 內容生成。

描述

Look at the image the chip is not allwhiner something but the board is GA-36MB v1.2 i found an sd backup and it wont work and i tried goodlock os too that wont work too what should i do when i plug in the device to power the red led comes on but when i press the power button nothing happens at all i have tried 2 sd cards both i belive are genuine

IMG_20261106_191405.jpg

主要語言
C++
星號
54
分支
8
平均合併
16 天 19 小時
30 天內合併 PR
4

環境準備

這個專案沒有提供開發容器、Dockerfile 或貢獻指南,環境需要你自己搭建:先看它的 README,通用步驟見我們的新手貢獻指南。

從這裡開始

  1. 先讀完整個 Issue,再讀專案的貢獻指南。
  2. 在 Issue 下留言說明你要接手 —— 這能避免兩個人做同樣的事。
  3. Fork 儲存庫,在一個分支上完成修改。
  4. 送出 Pull Request,並在描述裡引用這個 Issue 編號。

CodeZombie/goodluckOS 的其他 Issue

查看 CodeZombie/goodluckOS 的全部 Issue

相似的 Issue

更多 C++ Issue

把新 issue 寄到你的電子郵件信箱

精選適合新手參與的 GitHub issue 摘要。