What should i use for this

Đang mở
#156 11 bình luận 0 reaction 0 người được giao Xem trên GitHub

Chưa có ai nhận issue này.

Đánh giá

Độ khó
4/5
Thời gian dự kiến
3-5 ngày
Mức phù hợp với người mới
35/100
Loại issue
Lỗi
Độ rõ ràng
Khá rõ ràng
Mức độ hoạt động
Sôi nổi
Công nghệ
cpp
Lĩnh vực
embedded-iot

Hướng nghiên cứu

Start by identifying the exact device and board revision from the photos and confirm which firmware image and SD card layout support GA-36MB v1.2. The report says two SD cards and a backup image both fail, while the red LED turns on but the power button has no effect. Compare those symptoms with the project's setup and troubleshooting guidance; done means identifying a supported recovery path or the missing device details needed to diagnose it.

Do mô hình lập chỉ mục viết ra từ nội dung của issue.

Mô tả

Look at the image the chip is not allwhiner something but the board is GA-36MB v1.2 i found an sd backup and it wont work and i tried goodlock os too that wont work too what should i do when i plug in the device to power the red led comes on but when i press the power button nothing happens at all i have tried 2 sd cards both i belive are genuine

IMG_20261106_191405.jpg

Ngôn ngữ chính
C++
Star
54
Fork
8
Merge trung bình
16 ngày 19 giờ
Pull request đã merge (30 ngày)
4

Chuẩn bị môi trường

Dự án này không cung cấp dev container, Dockerfile hay hướng dẫn đóng góp, nên bạn cần tự thiết lập môi trường: hãy bắt đầu từ README và xem hướng dẫn đóng góp lần đầu của chúng tôi để biết các bước chung.

Bắt đầu từ đâu

  1. Đọc hết issue, rồi đọc hướng dẫn đóng góp của dự án.
  2. Bình luận trên issue rằng bạn sẽ nhận — tránh hai người làm cùng một việc.
  3. Fork repository và làm thay đổi trên một nhánh.
  4. Mở pull request có tham chiếu số hiệu của issue.

Issue khác của CodeZombie/goodluckOS

Tất cả issue của CodeZombie/goodluckOS

Issue tương tự

Thêm issue về C++

Nhận issue mới trong hộp thư của bạn

Bản tóm tắt ngắn những issue GitHub phù hợp với người mới.