collections/batch: one object that fails client-side encoding fails every object sent with it

Đang mở
#2,266 0 bình luận 0 reaction 0 người được giao Xem trên GitHub

Maintainer thường phản hồi trong vòng 1 ngày

@shadowmodder đang làm issue này rồi.

Từ ngày 18/11/2026.

  • #2267 của @shadowmodder — đang mở

Đánh giá

Độ khó
3/5
Thời gian dự kiến
1-2 ngày
Mức phù hợp với người mới
72/100
Loại issue
Lỗi
Độ rõ ràng
Đặc tả rõ ràng
Mức độ hoạt động
Sôi nổi
Công nghệ
python
Lĩnh vực
api, backend

Hướng nghiên cứu

Start with weaviate/collections/batch/grpc_batch.py and its grpc_objects method, then read weaviate/collections/batch/base.py around __send_batch and weaviate/collections/batch/sync.py around __generate_stream_requests. Track how each encoding error is recorded in failed_objects and how remaining objects are sent. Done when one invalid object is reported individually and valid objects still reach the server in both batch modes.

Do mô hình lập chỉ mục viết ra từ nội dung của issue.

Mô tả

bug

What happens

One object whose vector or property the client cannot encode fails every object batched with it, and the error does not say which object it was. In batch.stream() the objects are dropped without any exception.

fixed_size

Add 100 objects through collection.batch.fixed_size(batch_size=100), each with a colbert multi-vector. Object 37 carries the ragged [[0.1, 0.2], [0.3]].

  1. With #2039, _Pack.multi, which packs a multi-vector into bytes, raises WeaviateInvalidInputError on object 37's vector.
  2. _BatchGRPC.grpc_objects builds the protobuf message for all 100 objects in one list comprehension. The error aborts the request before anything is sent.
  3. The except Exception in _BatchBase.__send_batch attaches that one error to all 100 objects.
  4. The log shows Failed to send all objects in a batch of 100. collection.batch.failed_objects holds 100 entries, each reading Multi-vector embeddings must have consistent dimensions. Expected dimension 2, got 1. The server receives 0 objects.

The message names neither object 37 nor colbert. Retrying failed_objects sends object 37 along with the other 99, so the retry fails the same way.

stream

__generate_stream_requests encodes each object with grpc_object inside the background send loop. The error ends that loop, so no object still unsent reaches the server. An add_object called after the loop has died raises the error. When the code finished adding before that, the with block exits normally. failed_objects is empty, and the only trace is one ERROR log line. In the reproduction below, 0 of 300 objects arrive.

The silent exit comes from a second defect: the stream context manager's __exit__ never re-raises the loop's exception. That needs its own fix, and this issue covers only the per-object encoding failure.

Reachability

Reachable from user input. Once #2039 merges, any batch.add_object call with a ragged multi-vector triggers it. On main today, a Decimal property value triggers the same failure in both modes, as #2263 reports for fixed_size.

Severity

High. In stream mode every unsent object is lost, with no exception and an empty failed_objects. In fixed-size mode nothing is lost silently, but 99 valid objects are reported failed under an error that is not theirs.

Where

# grpc_batch.py:94
def grpc_objects(self, objects: List[_BatchObject]) -> List[batch_pb2.BatchObject]:
    return [self.grpc_object(obj) for obj in objects]

# base.py:647
except Exception as e:
    errors_obj = {
        idx: ErrorObject(message=repr(e), object_=obj) for idx, obj in enumerate(objs)
    }
    logger.error(
        {
            "message": f"Failed to send all objects in a batch of {len(objs)}",
            "error": repr(e),
        }
    )

# sync.py:238
for object_ in objects:
    obj = self.__batch_grpc.grpc_object(object_._to_internal())

Suggested fix

Catch the error per object in grpc_objects and in __generate_stream_requests. Record it as that object's ErrorObject, the entry failed_objects returns, keyed by obj.index like the server-side errors. Then send the remaining objects. Put the object's UUID and the vector name in the message; __multi_vec already has the name when it calls _Pack.parse_single_or_multi_vec. After the fix, the reproduction below should print server received 99, failed_objects 1 for fixed_size and server received 299 for stream.

Reproduction

This runs offline against the mock servers in mock_tests/conftest.py. Save it as mock_tests/test_ragged_repro.py and run pytest mock_tests/test_ragged_repro.py -s.

import weaviate
from weaviate.proto.v1 import batch_pb2, weaviate_pb2_grpc

from .conftest import MOCK_IP, MOCK_PORT, MOCK_PORT_GRPC
from .mock_data import mock_class


def vector(i):
    if i == 37:
        return {"colbert": [[0.1, 0.2], [0.3]]}  # ragged
    return {"colbert": [[0.1, 0.2], [0.3, 0.4]]}


class Service(weaviate_pb2_grpc.WeaviateServicer):
    received = 0

    def BatchObjects(self, request, context):
        Service.received += len(request.objects)
        return batch_pb2.BatchObjectsReply()

    def BatchStream(self, request_iterator, context):
        yield batch_pb2.BatchStreamReply(started=batch_pb2.BatchStreamReply.Started())
        for request in request_iterator:
            if request.HasField("data"):
                uuids = [o.uuid for o in request.data.objects.values]
                Service.received += len(uuids)
                yield batch_pb2.BatchStreamReply(acks=batch_pb2.BatchStreamReply.Acks(uuids=uuids))
            if request.HasField("stop"):
                return


def connect(weaviate_mock, grpc_server):
    Service.received = 0
    weaviate_pb2_grpc.add_WeaviateServicer_to_server(Service(), grpc_server)
    weaviate_mock.expect_request(f"/v1/schema/{mock_class['class']}").respond_with_json(mock_class)
    client = weaviate.connect_to_local(port=MOCK_PORT, host=MOCK_IP, grpc_port=MOCK_PORT_GRPC)
    return client, client.collections.use(mock_class["class"])


def test_fixed_size(weaviate_mock, start_grpc_server):
    client, col = connect(weaviate_mock, start_grpc_server)
    with col.batch.fixed_size(batch_size=100) as batch:
        for i in range(100):
            batch.add_object({"name": f"Object {i}"}, vector=vector(i))
    failed = col.batch.failed_objects
    print(f"\nfixed_size: server received {Service.received}, failed_objects {len(failed)}")
    print(f"fixed_size: messages {({f.message for f in failed})}")
    client.close()


def test_stream(weaviate_mock, start_grpc_server):
    client, col = connect(weaviate_mock, start_grpc_server)
    with col.batch.stream() as batch:
        for i in range(300):
            batch.add_object({"name": f"Object {i}"}, vector=vector(i))
    failed = col.batch.failed_objects
    print(f"\nstream: no exception, server received {Service.received}, failed_objects {len(failed)}")
    client.close()

On #2039's head, 96a0c28e:

fixed_size: server received 0, failed_objects 100
fixed_size: messages {"WeaviateInvalidInputError('Invalid input provided: Multi-vector embeddings must have consistent dimensions. Expected dimension 2, got 1..')"}
stream: no exception, server received 0, failed_objects 0

On main, 4c919f66:

fixed_size: server received 100, failed_objects 0
fixed_size: messages set()
stream: no exception, server received 300, failed_objects 0

Provenance

Aggravated by #2039. The whole-batch failure predates it. On main at 4c919f66, one Decimal value already fails the batch in fixed_size (#2263) and drops 300 of 300 objects in stream. #2039 adds ragged multi-vectors as a new way to reach it, and the fix lands outside its diff. Determined against 4c919f66...96a0c28e.

Verification

Confirmed. The reproduction above ran on #2039's head and on main, with the outputs shown. The Decimal stream case ran on main against the same mock service.

Where it surfaced

Review of #2039 (pragnyan/reject-ragged-multi-vectors) against main at 4c919f66. Related: #2263 reports the same failure through a Decimal property; its author plans a fix for the error message and left the whole-batch failure open. #2165 reports how __send_batch keys these whole-batch errors.

Ngôn ngữ chính
Python
Star
230
Fork
173
Merge trung bình
4 ngày 16 giờ
Pull request đã merge (30 ngày)
23

Chuẩn bị môi trường

Bắt đầu từ đâu

  1. Đọc hết issue, rồi đọc hướng dẫn đóng góp của dự án.
  2. Bình luận trên issue rằng bạn sẽ nhận — tránh hai người làm cùng một việc.
  3. Fork repository và làm thay đổi trên một nhánh.
  4. Mở pull request có tham chiếu số hiệu của issue.

Issue khác của weaviate/weaviate-python-client

Tất cả issue của weaviate/weaviate-python-client

Issue tương tự

Thêm issue về Python

Nhận issue mới trong hộp thư của bạn

Bản tóm tắt ngắn những issue GitHub phù hợp với người mới.