Add Reset Pin to Debug Probe

Đang mở
#212 0 bình luận 0 reaction 0 người được giao Xem trên GitHub

Chưa có ai nhận issue này.

Đánh giá

Độ khó
3/5
Thời gian dự kiến
1-2 ngày
Mức phù hợp với người mới
55/100
Loại issue
Tính năng
Độ rõ ràng
Khá rõ ràng
Mức độ hoạt động
Sôi nổi
Công nghệ
c
Lĩnh vực
embedded-iot

Hướng nghiên cứu

Read board_debug_probe_config.h and board_pico_config.h, then inspect commit d47b308 and the firmware uses of GPIO 0 and GPIO 1, especially UART0 RX/TX. Compare those uses with the schematic connections at J4, TP23, and TP25. Done means determining whether a reset pin can be defined for the debug probe and documenting or implementing a compatible choice.

Do mô hình lập chỉ mục viết ra từ nội dung của issue.

Mô tả

Is there a reason the board_debug_probe_config.h does not define a reset pin while board_pico_config.h does?

The debug probe schematic shows GPIO pins 0 and 1 being connected to J4 as well as TP23 and TP25 respectively and the pins don't appear to be used in firmware.

Extra Context

Commit d47b308 changed the reset pin from GPIO 0 to GPIO 1. The commit message in part was "The reset pin must move otherwise uart0 tx is squashed". That makes me wonder if it being GPIO 1 would mess with uart0 rx but I haven't dug into it.

Ngôn ngữ chính
C
Star
1.3k
Fork
376
Chỉ số merge pull request
Không có pull request nào được merge trong 30 ngày

Chuẩn bị môi trường

Dự án này không cung cấp dev container, Dockerfile hay hướng dẫn đóng góp, nên bạn cần tự thiết lập môi trường: hãy bắt đầu từ README và xem hướng dẫn đóng góp lần đầu của chúng tôi để biết các bước chung.

Bắt đầu từ đâu

  1. Đọc hết issue, rồi đọc hướng dẫn đóng góp của dự án.
  2. Bình luận trên issue rằng bạn sẽ nhận — tránh hai người làm cùng một việc.
  3. Fork repository và làm thay đổi trên một nhánh.
  4. Mở pull request có tham chiếu số hiệu của issue.

Issue khác của raspberrypi/debugprobe

Tất cả issue của raspberrypi/debugprobe

Issue tương tự

Thêm issue về C

Nhận issue mới trong hộp thư của bạn

Bản tóm tắt ngắn những issue GitHub phù hợp với người mới.