Add Reset Pin to Debug Probe

オープン
#212 コメント 0 件 リアクション 0 件 担当者 0 名 GitHub で見る

まだ誰も着手していません。

評価

難易度
3/5
見積もり時間
1〜2日
初心者へのやさしさ
55/100
issue の種類
機能追加
明瞭さ
おおむね明確
活発さ
活発
技術スタック
c
領域
embedded-iot

調査の方向性

Read board_debug_probe_config.h and board_pico_config.h, then inspect commit d47b308 and the firmware uses of GPIO 0 and GPIO 1, especially UART0 RX/TX. Compare those uses with the schematic connections at J4, TP23, and TP25. Done means determining whether a reset pin can be defined for the debug probe and documenting or implementing a compatible choice.

索引モデルが issue の本文から書いたものです。

説明

Is there a reason the board_debug_probe_config.h does not define a reset pin while board_pico_config.h does?

The debug probe schematic shows GPIO pins 0 and 1 being connected to J4 as well as TP23 and TP25 respectively and the pins don't appear to be used in firmware.

Extra Context

Commit d47b308 changed the reset pin from GPIO 0 to GPIO 1. The commit message in part was "The reset pin must move otherwise uart0 tx is squashed". That makes me wonder if it being GPIO 1 would mess with uart0 rx but I haven't dug into it.

主要言語
C
スター
1.3k
フォーク
376
PR マージ指標
30日以内にマージされた PR はありません

環境構築

このプロジェクトには開発コンテナ、Dockerfile、コントリビューションガイドがありません。まず README を読み、一般的な手順ははじめてのコントリビューションガイドを参照してください。

はじめの一歩

  1. issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
  2. 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
  3. リポジトリをフォークし、ブランチを切って変更します。
  4. issue 番号を参照したプルリクエストを送ります。

raspberrypi/debugprobe のほかの issue

raspberrypi/debugprobe の issue をすべて見る

似ている issue

C の issue をもっと見る

新しい issue をメールで受け取る

初心者向けの GitHub issue を短くまとめたダイジェスト。