[BUG] Download/conversion from many news websites doesn't work anymore

Đang mở
#222 2 bình luận 0 reaction 0 người được giao Xem trên GitHub

Chưa có ai nhận issue này.

Đánh giá

Độ khó
4/5
Thời gian dự kiến
3-5 ngày
Mức phù hợp với người mới
25/100
Loại issue
Lỗi
Độ rõ ràng
Cần làm rõ
Mức độ hoạt động
Sôi nổi
Công nghệ
docker
Lĩnh vực
infrastructure

Hướng nghiên cứu

The report says Calibre 9.16 needs the Camoufox browser for news sources such as The Economist, and the image lacks it. Start with the repository's Dockerfile to see how Calibre and its browser dependencies are installed. The container logs only show the Wayland desktop starting, not the fetch failure, so reproduce by running the Fetch news source for The Economist. Done means that fetch succeeds inside the built image.

Do mô hình lập chỉ mục viết ra từ nội dung của issue.

Mô tả

no-issue-activity
Is there an existing issue for this?
  • I have searched the existing issues
Current Behavior

The release notes of Calibre 9.16 shows that the Camoufox browser is required to download from several news sources such as The New York Times, The Economist and The Atlantic.

Expected Behavior

No response

Steps To Reproduce

Using the image, use the Fetch news source, try to fetch The Economist, it fails.

Environment
- OS: Archlinux
- How docker service was installed: pacman
CPU architecture

x86-64

Docker creation
docker run -d \
    -name=calibre \
    -e PUID=5000 \
    -e PGID=985 \
    -e TZ=Asia/Japan \
    -p 8080:8080 \
    -p 8181:8181 \
    -p 8081:8081 \
    --restart unless-stopped \
    -v $HOME/docker/calibre/config:/config \
    lscr.io/linuxserver/calibre:latest
Container logs
[migrations] started
[migrations] no migrations found
───────────────────────────────────────

      ██╗     ███████╗██╗ ██████╗
      ██║     ██╔════╝██║██╔═══██╗
      ██║     ███████╗██║██║   ██║
      ██║     ╚════██║██║██║   ██║
      ███████╗███████║██║╚██████╔╝
      ╚══════╝╚══════╝╚═╝ ╚═════╝

   Brought to you by linuxserver.io
───────────────────────────────────────

To support LSIO projects visit:
https://www.linuxserver.io/donate/

───────────────────────────────────────
GID/UID
───────────────────────────────────────

User UID:    5000
User GID:    985
───────────────────────────────────────
Linuxserver.io version: v9.16.0-ls426
Build-date: 2026-10-09T09:41:54+00:00
───────────────────────────────────────
    
[ls.io-init] Generating labwc rc.xml from template
[custom-init] No custom files found, skipping...
[svc-de] Wayland mode: Waiting for socket at /config/.XDG/wayland-1...
[ls.io-init] done.
19
20
[Wayland] Renderer: software (Pixman), no render node.
[Wayland] View 1 created over output 0: 1024x768 @ (0, 0).
[Wayland] Socket listening on: "wayland-1"
[svc-de] /config/.XDG/wayland-1 found launching de
[Wayland] Output 0 resized to 1366x1242 scale 1.00.
[Wayland] Readback capture: output 1 1366x1242 rendered in software (Pixman), read back for the encode thread (no GPU renderer).
[Wayland] Encoder: software H264 (x264).
[Wayland] Readback encode: no hardware encoder opened; encoding in software (x264).
[Wayland] Stream settings active -> Res: 1366x1242 | FPS: 60.0 | Stripes: 1 | Mode: H264 (x264) FullFrame | CRF: 25 | VBV: 8000 kbps | PaintOver CRF: 18 (Burst: 5f) | Colorspace: I420 (Limited Range) | Damage Thresh: 10f | Damage Dur: 20f
[pcmflux] SUCCESS: Opus encoder created (2 ch).
[pcmflux] Capture loop started. Device: output.monitor, Rate: 48000, Channels: 2, Bitrate: 320 kbps, VBR: On, Silence Gate: On
[pcmflux] Stop requested. Cleaning up capture loop...
[pcmflux] Audio capture loop finished. Resources released.
[pcmflux] SUCCESS: Opus encoder created (2 ch).
[pcmflux] Capture loop started. Device: output.monitor, Rate: 48000, Channels: 2, Bitrate: 320 kbps, VBR: On, Silence Gate: On
[Wayland] Readback capture: output 1 1366x1242 rendered in software (Pixman), read back for the encode thread (no GPU renderer).
[Wayland] Encoder: software H264 (x264).
[Wayland] Readback encode: no hardware encoder opened; encoding in software (x264).
[Wayland] Stream settings active -> Res: 1366x1242 | FPS: 60.0 | Stripes: 1 | Mode: H264 (x264) FullFrame | CRF: 25 | VBV: 8000 kbps | PaintOver CRF: 18 (Burst: 5f) | Colorspace: I420 (Limited Range) | Damage Thresh: 10f | Damage Dur: 20f
[pcmflux] Stop requested. Cleaning up capture loop...
[pcmflux] Audio capture loop finished. Resources released.
[pcmflux] SUCCESS: Opus encoder created (2 ch).
[pcmflux] Capture loop started. Device: output.monitor, Rate: 48000, Channels: 2, Bitrate: 320 kbps, VBR: On, Silence Gate: On
[Wayland] Readback capture: output 1 1366x1242 rendered in software (Pixman), read back for the encode thread (no GPU renderer).
[Wayland] Encoder: software H264 (x264).
[Wayland] Readback encode: no hardware encoder opened; encoding in software (x264).
[Wayland] Stream settings active -> Res: 1366x1242 | FPS: 60.0 | Stripes: 1 | Mode: H264 (x264) FullFrame | CRF: 25 | VBV: 8000 kbps | PaintOver CRF: 18 (Burst: 5f) | Colorspace: I420 (Limited Range) | Damage Thresh: 10f | Damage Dur: 20f
[Wayland] Readback capture: output 1 1366x1242 rendered in software (Pixman), read back for the encode thread (no GPU renderer).
[Wayland] Encoder: software H264 (x264).
[Wayland] Readback encode: no hardware encoder opened; encoding in software (x264).
[Wayland] Stream settings active -> Res: 1366x1242 | FPS: 60.0 | Stripes: 1 | Mode: H264 (x264) FullFrame | CRF: 25 | VBV: 8000 kbps | PaintOver CRF: 18 (Burst: 5f) | Colorspace: I420 (Limited Range) | Damage Thresh: 10f | Damage Dur: 20f
[Wayland] Readback capture: output 1 1366x1242 rendered in software (Pixman), read back for the encode thread (no GPU renderer).
[Wayland] Encoder: software H264 (x264).
[Wayland] Readback encode: no hardware encoder opened; encoding in software (x264).
[Wayland] Stream settings active -> Res: 1366x1242 | FPS: 60.0 | Stripes: 1 | Mode: H264 (x264) FullFrame | CRF: 25 | VBV: 8000 kbps | PaintOver CRF: 18 (Burst: 5f) | Colorspace: I420 (Limited Range) | Damage Thresh: 10f | Damage Dur: 20f
(END)
Ngôn ngữ chính
Dockerfile
Star
558
Fork
72
Merge trung bình
12 giờ 52 phút
Pull request đã merge (30 ngày)
1

Chuẩn bị môi trường

Bắt đầu từ đâu

  1. Đọc hết issue, rồi đọc hướng dẫn đóng góp của dự án.
  2. Bình luận trên issue rằng bạn sẽ nhận — tránh hai người làm cùng một việc.
  3. Fork repository và làm thay đổi trên một nhánh.
  4. Mở pull request có tham chiếu số hiệu của issue.

Issue tương tự

Thêm issue về DevOps

Nhận issue mới trong hộp thư của bạn

Bản tóm tắt ngắn những issue GitHub phù hợp với người mới.