[BUG] Download/conversion from many news websites doesn't work anymore
まだ誰も着手していません。
評価
- 難易度
- 4/5
- 見積もり時間
- 3〜5日
- 初心者へのやさしさ
- 25/100
- issue の種類
- バグ
- 明瞭さ
- 説明が足りない
- 活発さ
- 活発
- 技術スタック
- docker
調査の方向性
The report says Calibre 9.16 needs the Camoufox browser for news sources such as The Economist, and the image lacks it. Start with the repository's Dockerfile to see how Calibre and its browser dependencies are installed. The container logs only show the Wayland desktop starting, not the fetch failure, so reproduce by running the Fetch news source for The Economist. Done means that fetch succeeds inside the built image.
索引モデルが issue の本文から書いたものです。
説明
Is there an existing issue for this?
- I have searched the existing issues
Current Behavior
The release notes of Calibre 9.16 shows that the Camoufox browser is required to download from several news sources such as The New York Times, The Economist and The Atlantic.
Expected Behavior
No response
Steps To Reproduce
Using the image, use the Fetch news source, try to fetch The Economist, it fails.
Environment
- OS: Archlinux
- How docker service was installed: pacman
CPU architecture
x86-64
Docker creation
docker run -d \
-name=calibre \
-e PUID=5000 \
-e PGID=985 \
-e TZ=Asia/Japan \
-p 8080:8080 \
-p 8181:8181 \
-p 8081:8081 \
--restart unless-stopped \
-v $HOME/docker/calibre/config:/config \
lscr.io/linuxserver/calibre:latest
Container logs
[migrations] started
[migrations] no migrations found
───────────────────────────────────────
██╗ ███████╗██╗ ██████╗
██║ ██╔════╝██║██╔═══██╗
██║ ███████╗██║██║ ██║
██║ ╚════██║██║██║ ██║
███████╗███████║██║╚██████╔╝
╚══════╝╚══════╝╚═╝ ╚═════╝
Brought to you by linuxserver.io
───────────────────────────────────────
To support LSIO projects visit:
https://www.linuxserver.io/donate/
───────────────────────────────────────
GID/UID
───────────────────────────────────────
User UID: 5000
User GID: 985
───────────────────────────────────────
Linuxserver.io version: v9.16.0-ls426
Build-date: 2026-10-09T09:41:54+00:00
───────────────────────────────────────
[ls.io-init] Generating labwc rc.xml from template
[custom-init] No custom files found, skipping...
[svc-de] Wayland mode: Waiting for socket at /config/.XDG/wayland-1...
[ls.io-init] done.
19
20
[Wayland] Renderer: software (Pixman), no render node.
[Wayland] View 1 created over output 0: 1024x768 @ (0, 0).
[Wayland] Socket listening on: "wayland-1"
[svc-de] /config/.XDG/wayland-1 found launching de
[Wayland] Output 0 resized to 1366x1242 scale 1.00.
[Wayland] Readback capture: output 1 1366x1242 rendered in software (Pixman), read back for the encode thread (no GPU renderer).
[Wayland] Encoder: software H264 (x264).
[Wayland] Readback encode: no hardware encoder opened; encoding in software (x264).
[Wayland] Stream settings active -> Res: 1366x1242 | FPS: 60.0 | Stripes: 1 | Mode: H264 (x264) FullFrame | CRF: 25 | VBV: 8000 kbps | PaintOver CRF: 18 (Burst: 5f) | Colorspace: I420 (Limited Range) | Damage Thresh: 10f | Damage Dur: 20f
[pcmflux] SUCCESS: Opus encoder created (2 ch).
[pcmflux] Capture loop started. Device: output.monitor, Rate: 48000, Channels: 2, Bitrate: 320 kbps, VBR: On, Silence Gate: On
[pcmflux] Stop requested. Cleaning up capture loop...
[pcmflux] Audio capture loop finished. Resources released.
[pcmflux] SUCCESS: Opus encoder created (2 ch).
[pcmflux] Capture loop started. Device: output.monitor, Rate: 48000, Channels: 2, Bitrate: 320 kbps, VBR: On, Silence Gate: On
[Wayland] Readback capture: output 1 1366x1242 rendered in software (Pixman), read back for the encode thread (no GPU renderer).
[Wayland] Encoder: software H264 (x264).
[Wayland] Readback encode: no hardware encoder opened; encoding in software (x264).
[Wayland] Stream settings active -> Res: 1366x1242 | FPS: 60.0 | Stripes: 1 | Mode: H264 (x264) FullFrame | CRF: 25 | VBV: 8000 kbps | PaintOver CRF: 18 (Burst: 5f) | Colorspace: I420 (Limited Range) | Damage Thresh: 10f | Damage Dur: 20f
[pcmflux] Stop requested. Cleaning up capture loop...
[pcmflux] Audio capture loop finished. Resources released.
[pcmflux] SUCCESS: Opus encoder created (2 ch).
[pcmflux] Capture loop started. Device: output.monitor, Rate: 48000, Channels: 2, Bitrate: 320 kbps, VBR: On, Silence Gate: On
[Wayland] Readback capture: output 1 1366x1242 rendered in software (Pixman), read back for the encode thread (no GPU renderer).
[Wayland] Encoder: software H264 (x264).
[Wayland] Readback encode: no hardware encoder opened; encoding in software (x264).
[Wayland] Stream settings active -> Res: 1366x1242 | FPS: 60.0 | Stripes: 1 | Mode: H264 (x264) FullFrame | CRF: 25 | VBV: 8000 kbps | PaintOver CRF: 18 (Burst: 5f) | Colorspace: I420 (Limited Range) | Damage Thresh: 10f | Damage Dur: 20f
[Wayland] Readback capture: output 1 1366x1242 rendered in software (Pixman), read back for the encode thread (no GPU renderer).
[Wayland] Encoder: software H264 (x264).
[Wayland] Readback encode: no hardware encoder opened; encoding in software (x264).
[Wayland] Stream settings active -> Res: 1366x1242 | FPS: 60.0 | Stripes: 1 | Mode: H264 (x264) FullFrame | CRF: 25 | VBV: 8000 kbps | PaintOver CRF: 18 (Burst: 5f) | Colorspace: I420 (Limited Range) | Damage Thresh: 10f | Damage Dur: 20f
[Wayland] Readback capture: output 1 1366x1242 rendered in software (Pixman), read back for the encode thread (no GPU renderer).
[Wayland] Encoder: software H264 (x264).
[Wayland] Readback encode: no hardware encoder opened; encoding in software (x264).
[Wayland] Stream settings active -> Res: 1366x1242 | FPS: 60.0 | Stripes: 1 | Mode: H264 (x264) FullFrame | CRF: 25 | VBV: 8000 kbps | PaintOver CRF: 18 (Burst: 5f) | Colorspace: I420 (Limited Range) | Damage Thresh: 10f | Damage Dur: 20f
(END)
- 主要言語
- Dockerfile
- スター
- 558
- フォーク
- 72
- 平均マージ
- 12時間 52分
- マージ済み PR(30日)
- 1
環境構築
- Dockerfile または Docker Compose ファイルあり
- プルリクエストのテンプレートあり
- コントリビューションガイドを読む
はじめの一歩
- issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
- 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
- リポジトリをフォークし、ブランチを切って変更します。
- issue 番号を参照したプルリクエストを送ります。
似ている issue
-
windows-artifacts: the win-arm64 job uses a Visual Studio generator missing from windows-11-armオープン
難易度 1/5 1時間未満 初心者へのやさしさ 86/100
-
Own-agent checks: reject the Actions bot id in admit.mjs and test the source label in pr-verifyオープン
難易度 2/5 1〜3時間 初心者へのやさしさ 74/100
melodic-software/claude-code-plugins#17374 · コメント 2 件 ·
メンテナーはふだん 1 日以内に返信
-
area: doc-engine area: infrastructure bug community-request
難易度 2/5 1〜3時間 初心者へのやさしさ 75/100
snapotter-hq/SnapOtter#4834 ·
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
-
難易度 2/5 1〜3時間 初心者へのやさしさ 73/100
soroswap/token-list#125 ·
メンテナーはふだん 1 日以内に返信