Kernel mode drops many DTMF events when DTMF packets are interleaved with audio packets
Maintainers usually reply within 2 days
Nobody has claimed this yet.
Assessment
- Difficulty
- 4/5
- Estimated time
- 3-5 days
- Newbie friendliness
- 28/100
- Issue type
- Bug
- Clarity
- Mostly clear
- Activity status
- Stale
- Tech stack
- c, linux
- Domain
- audio-video-rtc, networking
Research direction
Start in kernel-module/xt_RTPENGINE.c at the pt_filter check (~lines 6268-6310) where packets with an unknown RTP payload type are dropped, then read daemon/media_socket.c (~1538-1560) where the kernel target's allowed payload-type list is built from payloads already observed. Reproduce with a g711 call carrying interleaved telephone-event packets (e.g. Cisco 7841). Done means DTMF still passes once the flow is kernelized, either by seeding the list from the SDP or by bubbling the unknown payload type up to userspace.
Written by the indexing model from the issue text.
Description
rtpengine version the issue has been seen with
13.4.1.6-1~bpo12+1
Used distribution and its version
Debian 12
Linux kernel version used
6.1.0-38-amd64
CPU architecture issue was seen on (see uname -m)
x86_64
Expected behaviour you didn't see
1:1 Proxying of DTMF Events
Unexpected behaviour you saw
In kernel mode many DTMF events are dropped when DTMF packets are interleaved with audio packets.
When running rtpengine only in user mode then interleaved DTMF is passed without problems.
Steps to reproduce the problem
Generate a g711 call with interleaved DMTF in the style as shown in the screenshot. E.g. with a CISCO 7841 phone. DTMF packets of one event are sent with the same timestamp and increasing duration until the DTMF end packet has been reached, while interleaved audio packets have increasing timestamps. Interleaving of packets is unusual but allowed according to rfc4733 and rfc2833.
Additional program output to the terminal or logs illustrating the issue
Anything else?
Claude AI Code Analysis
I'll scan the kernel module and related RTP/DTMF handling to see how interleaved RTP and RFC2833 DTMF are processed, focusing on sequence/timestamp ordering, payload-type switching, and packet coalescing that could drop events. Running broad semantic and exact searches in parallel.
I'll look specifically inside the kernel module sources for RFC2833/4733 handling, sequence/timestamp checks, and any jitter/ordering assumptions that might drop interleaved events. Then I'll open the key files it points to.
I looked through the kernel module path (kernel-module/xt_RTPENGINE.c) and how userspace populates it (daemon/media_socket.c). The module doesn’t do any DTMF-specific parsing; it just forwards RTP if the payload type is allowed for that target.
Key observations:
- Kernel forwarding only passes payload types that were registered at kernelization time. See
pt_filterhandling:
// if RTP, only forward packets of known/passthrough payload types
if (rtp_pt_idx < 0) {
if (g->target.pt_filter)
goto out;
}
- The list of allowed payload types (
g->target.pt_stats[]) is built in userspace from the stream’s observed RTP payloads, then sorted and pushed down to the kernel:
struct rtp_stats *payload_types[RTPE_NUM_PAYLOAD_TYPES];
...
while (t_hash_table_iter_next(&iter, NULL, &rs) && s->num_payload_types < RTPE_NUM_PAYLOAD_TYPES)
s->payload_types[s->num_payload_types++] = rs;
qsort(s->payload_types, s->num_payload_types, sizeof(*s->payload_types), __rtp_stats_pt_sort);
...
if (!can_kernelize) {
reti->pt_filter = 1;
- Critically, that list is derived from payload types already seen on the stream, not from the SDP. So if you kernelize when only audio has been observed,
telephone-eventmay not be included. When DTMF later appears interleaved with audio, those packets have an “unknown” PT for the kernel target and are dropped (not propagated up to userspace), causing lost tones. - There’s no fallback to userspace on unknown PT when
pt_filteris set; packets are just dropped. - Nothing else in the kernel path (seq/jitter tracking, SRTP re-encrypt, pattern replacement, min_payload_len) explains selective loss tied specifically to interleaving. The
min_payload_lenandblackholegating only apply if configured, and don’t target DTMF by default.
Why interleaving triggers it:
- Audio continues, so the flow stays kernelized.
- First DTMF packets (start/continuations/end) come with PT
telephone-event, which wasn’t registered; the kernel drops them due topt_filter. - If the system never bubbles those packets to userspace, the kernel target never gets updated, so the receiver misses some or all tones.
Practical fixes:
- Userspace: when creating the kernel target, include
telephone-eventproactively based on SDP, not just observed traffic. Or always includetelephone-eventif negotiated in the stream’s codec set. - Userspace: if
pt_filteris enabled, on the first unknown payload type observed in userspace (or via a signal from kernel), reconfigure the kernel target to add it. - Kernel: instead of dropping unknown PT under
pt_filter, “propagate” the first unknown PT up to userspace so that it can update the kernel target, or temporarily forward unknown PT for a grace period. - Optional: for safety, treat
telephone-eventas allowed by default when RTP is allowed for the stream’s SSRC.
If you want, I can implement the userspace change in daemon/media_socket.c to seed the kernel target’s payload list from the SDP (including telephone-event) so interleaved DTMF isn’t dropped after kernelization.
// if RTP, only forward packets of known/passthrough payload types
if (rtp_pt_idx < 0) {
if (g->target.pt_filter)
goto out;
}
struct rtp_stats *payload_types[RTPE_NUM_PAYLOAD_TYPES];
...
while (t_hash_table_iter_next(&iter, NULL, &rs) && s->num_payload_types < RTPE_NUM_PAYLOAD_TYPES)
s->payload_types[s->num_payload_types++] = rs;
qsort(s->payload_types, s->num_payload_types, sizeof(*s->payload_types), __rtp_stats_pt_sort);
...
if (!can_kernelize) {
reti->pt_filter = 1;
- Dominant language
- Perl
- Stars
- 992
- Forks
- 459
- PR merge metrics
- No merged PRs in 30d
Getting set up
This project ships no dev container, Dockerfile or contributing guide, so setting up is up to you: start from its README, and see our first-contribution guide for the general steps.
First steps
- Read the whole issue, then the project's contributing guide.
- Comment on the issue to say you are picking it up — it saves two people doing the same work.
- Fork the repository and make your change on a branch.
- Open a pull request that references the issue number.
More from sipwise/rtpengine
-
bug
Difficulty 1/5 Under an hour Newbie friendliness 75/100
Maintainers usually reply within 2 days
-
HTTP/WS worker threads spin forever in `__websocket_write_done()` (`sched_yield` loop) — 100% CPU with `--listen-http`Possibly taken A pull request linked to this issue is open or already merged. Openbug
Difficulty 4/5 3-5 days Newbie friendliness 15/100
sipwise/rtpengine#2197 · 1 comment ·
Maintainers usually reply within 2 days
-
Kernel NULL pointer dereference in target_put() during target deletionPossibly taken A pull request linked to this issue is open or already merged. Openbug
Difficulty 4/5 3-5 days Newbie friendliness 38/100
sipwise/rtpengine#2190 · 1 comment ·
Maintainers usually reply within 2 days
-
Calls using a third logical interface are silently never written to Redis (breaks keyspace-notification HA)Possibly taken A pull request linked to this issue is open or already merged. Open
Difficulty 4/5 3-5 days Newbie friendliness 35/100
sipwise/rtpengine#2181 · 4 comments ·
Maintainers usually reply within 2 days
-
bug
Difficulty 3/5 1-2 days Newbie friendliness 45/100
sipwise/rtpengine#2162 · 1 comment ·
Maintainers usually reply within 2 days
All issues in sipwise/rtpengine
Similar issues
-
Add .gitattributes so share/skel keeps LF on a Windows git checkoutPossibly taken @sadhana-s-codez claimed this 1 day ago. Open
Difficulty 1/5 Under an hour Newbie friendliness 85/100
PerlDancer/Dancer2#1854 · 1 comment ·
Maintainers usually reply within 1 day
-
bug
Difficulty 2/5 1-3 hours Newbie friendliness 78/100
major/MySQLTuner-perl#1007 ·
Maintainers usually reply within 1 day
-
Difficulty 1/5 Under an hour Newbie friendliness 88/100
-
Difficulty 1/5 Under an hour Newbie friendliness 88/100
-
Difficulty 2/5 1-3 hours Newbie friendliness 69/100
bioconda/bioconda-recipes#70187 ·
Maintainers usually reply within 2 days