ED-HMI2220-070C: black screen with stock driver bridge-init value 0x02; 0x01 restores display on affected unit

Open
#7,708 4 comments 0 reactions 0 assignees View on GitHub

Maintainers usually reply within 1 day

Nobody has claimed this yet.

Assessment

Difficulty
4/5
Estimated time
3-5 days
Newbie friendliness
45/100
Issue type
Bug
Clarity
Mostly clear
Activity status
Active
Tech stack
c, linux

Research direction

Start with drivers/regulator/edatec-panel-regulator.c and inspect the REG_BRIDGE_INIT write alongside the device-tree overlay configuration and the reported I2C values. Compare behavior across affected and unaffected panel units or controller revisions to determine how the initialization value should be selected. Done means the affected display works after a cold boot while supported units retain working displays; add or run relevant regulator and panel tests if available.

Written by the indexing model from the issue text.

Description

Describe the bug

When installing and operating system, such as the latest Raspberry Pi OS release.
The HMI will be blank. The HDMI port will work. The HMI will not.

Steps to reproduce the behaviour

reinstall an os,
Or, after applying work around, unapply work around. same behavior.
Issue may be present in certain specific versions

Device (s)

Ed-HMI2220-070c

System

pi@raspberrypi:~ $ cat /etc/os-release
PRETTY_NAME="Debian GNU/Linux 13 (trixie)"
NAME="Debian GNU/Linux"
VERSION_ID="13"
VERSION="13 (trixie)"
VERSION_CODENAME=trixie
DEBIAN_VERSION_FULL=13.7
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

$ uname -a
Linux raspberrypi 6.18.50+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.18.50-1+rpt1 (2026-09-11) aarch64 GNU/Linux
pi@raspberrypi:~ $ vcgencmd version
Sep 14 2026 14:49:30
Copyright (c) 2012 Broadcom
version a86983925695a7e63166327d7c002d64040ed31d (clean) (release) (start)
pi@raspberrypi:~ $ cat /etc/rpi-issue
Raspberry Pi reference 2026-10-06
Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, b2cd98a9ee08a31ef7d0110ed09f2492bbd972ec, stage4

Logs

No response

Additional context

This issue may pertain to the 8GB or older models of the ED-HMI2220-070C
From testing, the 32GB model is unaffected.

Environment:

  • Hardware: EDATEC ED-HMI2220-070C, unit with 8 GB eMMC storage
  • OS: Debian GNU/Linux 13 (Trixie), using Raspberry Pi kernel packages
  • Kernel: 6.18.50+rpt-rpi-v8
  • Driver: edatec_panel_regulator
  • Default overlay configuration
dtoverlay=vc4-kms-v3d

[all]
dtoverlay=vc4-kms-dsi-edatec-panel-070c,interrupt=7

I followed EDATEC application notes, which describes support through the stock Raspberry Pi kernel and overlays.

Expected Behavior:

The built-in display shows the console and desktop after boot.

Actual beahvior:

The backlight turns on, but the screen remains black. HDMI output works.
The kernel reports DSI-1 as connected and enabled at 1024×600.

workaround

enable userspace i2c
sudo i2ctransfer -f -y 10 w2@0x27 0x11 0x01
Desktop appears instantly

suspected source Issue:

https://github.com/raspberrypi/linux/blob/rpi-6.18.y/drivers/regulator/edatec-panel-regulator.c
regmap_write(regmap, REG_BRIDGE_INIT, 0x02);
is evidently incorrect for this unit model.

repeatability:

sudo i2ctransfer -f -y 10 w2@0x27 0x11 0x02
setting the value back to its initial setting will reproduce the issue, if the HMI is fully powered off, then restarted. simply running the command will not produce the initial behavior.

Proposal for resolution:

Please investigate whether the bridge-initialization value needs to be selected according to the panel-controller revision or exposed through a device-tree property, rather than fixed at 0x02 for all supported units.

I only have 8GB and 32GB models of this device, and I am not saying there is some correlation between disk space and video driver issues. This issue may effect various unit models, older or newer models, I'm not really sure. The ones with the blue label, maybe that indicates something relevant to the appropriate person. I have not compiled a specific hardware variants list that might compare hardware differences, or versions of this device, and the device itself is not clearly labeled. All I can verify is that I have some 8GB models of The Ed-HMI2220-070c device, and they are effected by this condition.

Reference Material:

https://edatec.cn/docs/an/an44-use-7-inch-and-10.1-inch-hmi-on-standard-rpi-os/#_2-2-configuration-instructions

Image Image Image
Dominant language
C
Stars
13.3k
Forks
5.5k
Avg merge
4d 10h
Merged PRs (30d)
31

Getting set up

This project ships no dev container, Dockerfile or contributing guide, so setting up is up to you: start from its README, and see our first-contribution guide for the general steps.

First steps

  1. Read the whole issue, then the project's contributing guide.
  2. Comment on the issue to say you are picking it up — it saves two people doing the same work.
  3. Fork the repository and make your change on a branch.
  4. Open a pull request that references the issue number.

More from raspberrypi/linux

All issues in raspberrypi/linux

Similar issues

More C issues

Get new issues in your inbox

A short digest of beginner-friendly GitHub issues.