ED-HMI2220-070C: black screen with stock driver bridge-init value 0x02; 0x01 restores display on affected unit

オープン
  • 何か問題がありますか？
#7,708 コメント 4 件 リアクション 0 件 担当者 0 名 GitHub で見る

メンテナーはふだん 1 日以内に返信

まだ誰も着手していません。

評価

難易度
4/5
見積もり時間
3〜5日
初心者へのやさしさ
45/100
issue の種類
バグ
明瞭さ
おおむね明確
活発さ
活発
技術スタック
c, linux
領域
embedded-iot, operating-systems

調査の方向性

Start with drivers/regulator/edatec-panel-regulator.c and inspect the REG_BRIDGE_INIT write alongside the device-tree overlay configuration and the reported I2C values. Compare behavior across affected and unaffected panel units or controller revisions to determine how the initialization value should be selected. Done means the affected display works after a cold boot while supported units retain working displays; add or run relevant regulator and panel tests if available.

索引モデルが issue の本文から書いたものです。

説明

Describe the bug

When installing and operating system, such as the latest Raspberry Pi OS release.
The HMI will be blank. The HDMI port will work. The HMI will not.

Steps to reproduce the behaviour

reinstall an os,
Or, after applying work around, unapply work around. same behavior.
Issue may be present in certain specific versions

Device (s)

Ed-HMI2220-070c

System

pi@raspberrypi:~ $ cat /etc/os-release
PRETTY_NAME="Debian GNU/Linux 13 (trixie)"
NAME="Debian GNU/Linux"
VERSION_ID="13"
VERSION="13 (trixie)"
VERSION_CODENAME=trixie
DEBIAN_VERSION_FULL=13.7
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

$ uname -a
Linux raspberrypi 6.18.50+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.18.50-1+rpt1 (2026-09-11) aarch64 GNU/Linux
pi@raspberrypi:~ $ vcgencmd version
Sep 14 2026 14:49:30
Copyright (c) 2012 Broadcom
version a86983925695a7e63166327d7c002d64040ed31d (clean) (release) (start)
pi@raspberrypi:~ $ cat /etc/rpi-issue
Raspberry Pi reference 2026-10-06
Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, b2cd98a9ee08a31ef7d0110ed09f2492bbd972ec, stage4

Logs

No response

Additional context

This issue may pertain to the 8GB or older models of the ED-HMI2220-070C
From testing, the 32GB model is unaffected.

Environment:

  • Hardware: EDATEC ED-HMI2220-070C, unit with 8 GB eMMC storage
  • OS: Debian GNU/Linux 13 (Trixie), using Raspberry Pi kernel packages
  • Kernel: 6.18.50+rpt-rpi-v8
  • Driver: edatec_panel_regulator
  • Default overlay configuration
dtoverlay=vc4-kms-v3d

[all]
dtoverlay=vc4-kms-dsi-edatec-panel-070c,interrupt=7

I followed EDATEC application notes, which describes support through the stock Raspberry Pi kernel and overlays.

Expected Behavior:

The built-in display shows the console and desktop after boot.

Actual beahvior:

The backlight turns on, but the screen remains black. HDMI output works.
The kernel reports DSI-1 as connected and enabled at 1024×600.

workaround

enable userspace i2c
sudo i2ctransfer -f -y 10 w2@0x27 0x11 0x01
Desktop appears instantly

suspected source Issue:

https://github.com/raspberrypi/linux/blob/rpi-6.18.y/drivers/regulator/edatec-panel-regulator.c
regmap_write(regmap, REG_BRIDGE_INIT, 0x02);
is evidently incorrect for this unit model.

repeatability:

sudo i2ctransfer -f -y 10 w2@0x27 0x11 0x02
setting the value back to its initial setting will reproduce the issue, if the HMI is fully powered off, then restarted. simply running the command will not produce the initial behavior.

Proposal for resolution:

Please investigate whether the bridge-initialization value needs to be selected according to the panel-controller revision or exposed through a device-tree property, rather than fixed at 0x02 for all supported units.

I only have 8GB and 32GB models of this device, and I am not saying there is some correlation between disk space and video driver issues. This issue may effect various unit models, older or newer models, I'm not really sure. The ones with the blue label, maybe that indicates something relevant to the appropriate person. I have not compiled a specific hardware variants list that might compare hardware differences, or versions of this device, and the device itself is not clearly labeled. All I can verify is that I have some 8GB models of The Ed-HMI2220-070c device, and they are effected by this condition.

Reference Material:

https://edatec.cn/docs/an/an44-use-7-inch-and-10.1-inch-hmi-on-standard-rpi-os/#_2-2-configuration-instructions

Image Image Image
主要言語
C
スター
13.3k
フォーク
5.5k
平均マージ
1日 4時間
マージ済み PR（30日）
21

環境構築

このプロジェクトには開発コンテナ、Dockerfile、コントリビューションガイドがありません。まず README を読み、一般的な手順ははじめてのコントリビューションガイドを参照してください。

はじめの一歩

  1. issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
  2. 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
  3. リポジトリをフォークし、ブランチを切って変更します。
  4. issue 番号を参照したプルリクエストを送ります。

raspberrypi/linux のほかの issue

raspberrypi/linux の issue をすべて見る

似ている issue

C の issue をもっと見る

新しい issue をメールで受け取る

初心者向けの GitHub issue を短くまとめたダイジェスト。