Port Gyro Odometry to Awkernel

Aberta
#754 1 comentário 0 reações 1 responsável Ver no GitHub

Mantenedores costumam responder em até 2 dias

@nokosaaan já está trabalhando nisso.

Desde 26/10/2026.

  • #688 de @nokosaaan — integrado

Avaliação

Esta issue ainda não foi avaliada.

Descrição

Implement gyro odometry in Awkernel using IMU angular velocity and vehicle velocity inputs to produce twist estimates with covariance for EKF localization, matching the behavior of the selected Autoware reference implementation.

Scope:

  • Accept timestamped IMU and vehicle velocity inputs with the required covariance information
  • Transform measurements into the configured output coordinate frame
  • Combine vehicle linear velocity and IMU angular velocity into twist estimates
  • Preserve the reference implementation’s covariance handling and stationary-state behavior
  • Define buffering, input freshness checks, and behavior when required inputs are unavailable or stale
  • Expose timestamped twist estimates with covariance for subsequent EKF integration

Acceptance criteria:

  • Output twist estimates and covariance match the reference within predefined tolerances under identical inputs and configuration.
  • Tests cover straight motion, turning, stationary conditions, and non-identity IMU mounting orientation.
  • Timestamp assignment, coordinate-frame conventions, and output-trigger behavior are documented and tested.
  • Missing or stale inputs are handled according to explicitly defined policies, with any deviations from the reference documented.
  • Execution time, scheduling delay, and memory usage are measured at representative input rates.
  • Test datasets, parameters, and reproduction steps are documented.

Out of scope:

Vehicle velocity estimation by integrating IMU acceleration, live IMU or CAN drivers, EKF fusion, and LiDAR motion distortion correction.

Linguagem predominante
Rust
Estrelas
282
Forks
12
Merge médio
2d 9h
PRs com merge (30d)
28

Preparar o ambiente

Este projeto não oferece contêiner de desenvolvimento, Dockerfile nem guia de contribuição, então a configuração fica por sua conta: comece pelo README e veja nosso guia da primeira contribuição para os passos gerais.

Primeiros passos

  1. Leia a issue inteira e depois o guia de contribuição do projeto.
  2. Comente na issue dizendo que vai assumir — evita que duas pessoas façam o mesmo trabalho.
  3. Faça um fork do repositório e trabalhe em uma branch.
  4. Abra um pull request que referencie o número da issue.

Mais de tier4/awkernel

Todas as issues de tier4/awkernel

Issues semelhantes

Mais issues de Rust

Receba novas issues na sua caixa de entrada

Um resumo curto de issues do GitHub para quem está começando.