Port Gyro Odometry to Awkernel

Ouverte
#754 1 commentaire 0 réactions 1 personne assignée Voir sur GitHub

Les mainteneurs répondent en général sous 2 jours

@nokosaaan y travaille déjà.

Depuis le 26/10/2026.

  • #688 par @nokosaaan — fusionnée

Évaluation

Cette issue n'a pas encore été évaluée.

Description

Implement gyro odometry in Awkernel using IMU angular velocity and vehicle velocity inputs to produce twist estimates with covariance for EKF localization, matching the behavior of the selected Autoware reference implementation.

Scope:

  • Accept timestamped IMU and vehicle velocity inputs with the required covariance information
  • Transform measurements into the configured output coordinate frame
  • Combine vehicle linear velocity and IMU angular velocity into twist estimates
  • Preserve the reference implementation’s covariance handling and stationary-state behavior
  • Define buffering, input freshness checks, and behavior when required inputs are unavailable or stale
  • Expose timestamped twist estimates with covariance for subsequent EKF integration

Acceptance criteria:

  • Output twist estimates and covariance match the reference within predefined tolerances under identical inputs and configuration.
  • Tests cover straight motion, turning, stationary conditions, and non-identity IMU mounting orientation.
  • Timestamp assignment, coordinate-frame conventions, and output-trigger behavior are documented and tested.
  • Missing or stale inputs are handled according to explicitly defined policies, with any deviations from the reference documented.
  • Execution time, scheduling delay, and memory usage are measured at representative input rates.
  • Test datasets, parameters, and reproduction steps are documented.

Out of scope:

Vehicle velocity estimation by integrating IMU acceleration, live IMU or CAN drivers, EKF fusion, and LiDAR motion distortion correction.

Langage dominant
Rust
Étoiles
282
Forks
12
Merge moyen
2 j 9 h
PR mergées (30 j)
28

Préparer son environnement

Ce projet ne fournit ni conteneur de développement, ni Dockerfile, ni guide de contribution : l'installation est à votre charge. Commencez par son README, et consultez notre guide de la première contribution pour les étapes générales.

Par où commencer

  1. Lisez l'issue en entier, puis le guide de contribution du projet.
  2. Signalez en commentaire que vous la prenez — cela évite que deux personnes fassent le même travail.
  3. Forkez le dépôt et travaillez sur une branche.
  4. Ouvrez une pull request qui référence le numéro de l'issue.

Autres issues de tier4/awkernel

Toutes les issues de tier4/awkernel

Issues similaires

Plus d'issues Rust

Recevez les nouvelles issues par e-mail

Un résumé court des issues GitHub adaptées aux débutants.