validator: revisit CLI defaults, starting with --builder-proposals at gloas
Mantenedores costumam responder em até 6 dias
Ninguém assumiu esta issue ainda.
Avaliação
- Dificuldade
- 4/5
- Tempo estimado
- 3-5 dias
- Facilidade para iniciantes
- 18/100
Direção de pesquisa
The defaults live in the validator client's CLI flag definitions, including --builder-proposals, --builder-boost-factor and --builder-min-bid, and in the gloas production path that sends builder_boost_factor to produceBlockV4. Start by comparing those defaults with the cross-client table in the issue and reading how #707 publishes proposer preferences. Done means a decision on which defaults change, with the opt-out behaviour specified; the issue itself lists that decision as open.
Escrita pelo modelo de indexação a partir do texto da issue.
Descrição
The validator client's defaults were chosen before gloas, and at gloas the most consequential one now differs from every other client: --builder-proposals is off by default, and without it produceBlockV4 gets builder_boost_factor: 0. Pooled p2p bids therefore never win on value, only when the local build fails (#707 documents that case).
What the other validator clients send at gloas by default
| Client | Default at gloas | Read at |
|---|---|---|
| Lighthouse | boost 100, min_bid 0. The builder CLI flags do not reach gloas production; the body comes from builder_definitions.yml |
unstable @ 1a704e58 |
| Prysm | boost 100. --enable-builder "has no effect after the gloas fork" |
develop @ 844d8b8d |
| Teku | p2p boost 100, min bid 0. The builder flag only empties the builder-API entries |
master @ 19b9214c |
| Lodestar | boost 90 when no selection is set. executiononly sends boost 0 with min_bid 2^64-1 and refuses a block that is not self-built |
unstable @ efd56334 |
| Nimbus | boost 100. --payload-builder only adds relay entries |
unstable @ 31bc2459 |
So four of the five let p2p bids compete at par by default, the fifth at 90%, and only Lodestar has a mode that rules them out entirely. All five publish proposer preferences unconditionally, as #707 does.
The likely reason: a gloas p2p bid is paid through the protocol rather than by a relay, so taking one asks less trust of the proposer than a pre-gloas blinded block. That is an inference, not something the clients' code says.
To decide
- Turn
--builder-proposalson by default, or split it. Before gloas the flag means relay registrations and blinded blocks, which need a beacon node with a builder (--builderon ethlambda), so defaulting that half on is a separate question from letting gloas p2p bids compete. Splitting it would match Lighthouse, Teku and Nimbus, whose builder flags no longer gate p2p bids. - The defaults that come with it:
--builder-boost-factor(100, or Lodestar's90) and--builder-min-bid(0). While ethlambda's own local payloads come back empty (getPayloadright afterforkchoiceUpdated, seen on the #707 devnet), any bid beats a local build at a boost of100. - An opt-out for self-build only, for an operator who must never take a builder's payload, even when the local build fails: Lodestar's
executiononlyshape,min_bid2^64-1plus a client-side refusal of a block whose bid is notBUILDER_INDEX_SELF_BUILD. - The other defaults, in the same pass:
--gas-limit's fixed60000000(#795) first.
Raised while addressing the review of #707.
- Linguagem predominante
- Rust
- Estrelas
- 86
- Forks
- 34
- Merge médio
- 9d 20h
- PRs com merge (30d)
- 77
Preparar o ambiente
- Inclui um Dockerfile ou arquivo Docker Compose
- Tem um modelo de pull request
- Ler o guia de contribuição
Primeiros passos
- Leia a issue inteira e depois o guia de contribuição do projeto.
- Comente na issue dizendo que vai assumir — evita que duas pessoas façam o mesmo trabalho.
- Faça um fork do repositório e trabalhe em uma branch.
- Abra um pull request que referencie o número da issue.
Mais de lambdaclass/ethlambda
-
Dificuldade 2/5 1-3 horas Facilidade para iniciantes 76/100
lambdaclass/ethlambda#850 ·
Mantenedores costumam responder em até 6 dias
-
Dificuldade 2/5 1-3 horas Facilidade para iniciantes 68/100
lambdaclass/ethlambda#777 · 1 reação ·
Mantenedores costumam responder em até 6 dias
-
Run all gossip validation testsTalvez livre de novo @dicethedev assumiu há 9 dias e não há nenhum pull request aberto. Aberta
Dificuldade 2/5 1-3 horas Facilidade para iniciantes 62/100
lambdaclass/ethlambda#725 · 2 comentários ·
Mantenedores costumam responder em até 6 dias
-
Handle malformed DB dataTalvez livre de novo @dicethedev assumiu há 115 dias e não há nenhum pull request aberto. Aberta
Dificuldade 2/5 1-3 horas Facilidade para iniciantes 76/100
lambdaclass/ethlambda#529 · 4 comentários ·
Mantenedores costumam responder em até 6 dias
-
Document architectural choicesTalvez livre de novo @dicethedev assumiu há 115 dias e não há nenhum pull request aberto. Aberta
Dificuldade 2/5 1-3 horas Facilidade para iniciantes 68/100
lambdaclass/ethlambda#521 · 2 comentários ·
Mantenedores costumam responder em até 6 dias
Todas as issues de lambdaclass/ethlambda
Issues semelhantes
-
Dificuldade 1/5 Menos de uma hora Facilidade para iniciantes 88/100
bytecodealliance/wrpc#1785 ·
Mantenedores costumam responder em até 1 dia
-
2 advisory ignore entries no longer match anything (`quick-xml` already patched in `Cargo.lock`)Aberta
Dificuldade 1/5 Menos de uma hora Facilidade para iniciantes 85/100
Mantenedores costumam responder em até 1 dia
-
Dificuldade 2/5 1-3 horas Facilidade para iniciantes 78/100
longbridge/nsh#2758 · 1 comentário ·
Mantenedores costumam responder em até 1 dia
-
Dificuldade 2/5 1-3 horas Facilidade para iniciantes 84/100
antithesishq/bombadil#473 ·
Mantenedores costumam responder em até 2 dias
-
bench/api.sh exec test fails with curl exit 52, and --ignore-failure still records the timingsAbertabug
Dificuldade 2/5 1-3 horas Facilidade para iniciantes 72/100
libracoder/kiri#669 ·
Mantenedores costumam responder em até 1 dia