validator: revisit CLI defaults, starting with --builder-proposals at gloas
Los mantenedores suelen responder en 6 días
Nadie ha tomado este issue todavía.
Evaluación
- Dificultad
- 4/5
- Tiempo estimado
- 3-5 días
- Aptitud para principiantes
- 18/100
Línea de trabajo
The defaults live in the validator client's CLI flag definitions, including --builder-proposals, --builder-boost-factor and --builder-min-bid, and in the gloas production path that sends builder_boost_factor to produceBlockV4. Start by comparing those defaults with the cross-client table in the issue and reading how #707 publishes proposer preferences. Done means a decision on which defaults change, with the opt-out behaviour specified; the issue itself lists that decision as open.
Escrito por el modelo de indexación a partir del texto del issue.
Descripción
The validator client's defaults were chosen before gloas, and at gloas the most consequential one now differs from every other client: --builder-proposals is off by default, and without it produceBlockV4 gets builder_boost_factor: 0. Pooled p2p bids therefore never win on value, only when the local build fails (#707 documents that case).
What the other validator clients send at gloas by default
| Client | Default at gloas | Read at |
|---|---|---|
| Lighthouse | boost 100, min_bid 0. The builder CLI flags do not reach gloas production; the body comes from builder_definitions.yml |
unstable @ 1a704e58 |
| Prysm | boost 100. --enable-builder "has no effect after the gloas fork" |
develop @ 844d8b8d |
| Teku | p2p boost 100, min bid 0. The builder flag only empties the builder-API entries |
master @ 19b9214c |
| Lodestar | boost 90 when no selection is set. executiononly sends boost 0 with min_bid 2^64-1 and refuses a block that is not self-built |
unstable @ efd56334 |
| Nimbus | boost 100. --payload-builder only adds relay entries |
unstable @ 31bc2459 |
So four of the five let p2p bids compete at par by default, the fifth at 90%, and only Lodestar has a mode that rules them out entirely. All five publish proposer preferences unconditionally, as #707 does.
The likely reason: a gloas p2p bid is paid through the protocol rather than by a relay, so taking one asks less trust of the proposer than a pre-gloas blinded block. That is an inference, not something the clients' code says.
To decide
- Turn
--builder-proposalson by default, or split it. Before gloas the flag means relay registrations and blinded blocks, which need a beacon node with a builder (--builderon ethlambda), so defaulting that half on is a separate question from letting gloas p2p bids compete. Splitting it would match Lighthouse, Teku and Nimbus, whose builder flags no longer gate p2p bids. - The defaults that come with it:
--builder-boost-factor(100, or Lodestar's90) and--builder-min-bid(0). While ethlambda's own local payloads come back empty (getPayloadright afterforkchoiceUpdated, seen on the #707 devnet), any bid beats a local build at a boost of100. - An opt-out for self-build only, for an operator who must never take a builder's payload, even when the local build fails: Lodestar's
executiononlyshape,min_bid2^64-1plus a client-side refusal of a block whose bid is notBUILDER_INDEX_SELF_BUILD. - The other defaults, in the same pass:
--gas-limit's fixed60000000(#795) first.
Raised while addressing the review of #707.
- Lenguaje dominante
- Rust
- Estrellas
- 86
- Forks
- 34
- Merge medio
- 9 d 20 h
- PR fusionados (30 d)
- 77
Preparar el entorno
- Incluye un Dockerfile o un archivo de Docker Compose
- Tiene una plantilla de pull request
- Leer la guía de contribución
Primeros pasos
- Lee el issue completo y luego la guía de contribución del proyecto.
- Comenta en el issue que vas a ocuparte — evita que dos personas hagan lo mismo.
- Haz un fork del repositorio y trabaja en una rama.
- Abre un pull request que haga referencia al número del issue.
Más de lambdaclass/ethlambda
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 76/100
lambdaclass/ethlambda#850 ·
Los mantenedores suelen responder en 6 días
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 68/100
lambdaclass/ethlambda#777 · 1 reacción ·
Los mantenedores suelen responder en 6 días
-
Run all gossip validation testsQuizá libre de nuevo @dicethedev la tomó hace 9 días y no hay ningún pull request abierto. Abierto
Dificultad 2/5 1-3 horas Aptitud para principiantes 62/100
lambdaclass/ethlambda#725 · 2 comentarios ·
Los mantenedores suelen responder en 6 días
-
Handle malformed DB dataQuizá libre de nuevo @dicethedev la tomó hace 115 días y no hay ningún pull request abierto. Abierto
Dificultad 2/5 1-3 horas Aptitud para principiantes 76/100
lambdaclass/ethlambda#529 · 4 comentarios ·
Los mantenedores suelen responder en 6 días
-
Document architectural choicesQuizá libre de nuevo @dicethedev la tomó hace 115 días y no hay ningún pull request abierto. Abierto
Dificultad 2/5 1-3 horas Aptitud para principiantes 68/100
lambdaclass/ethlambda#521 · 2 comentarios ·
Los mantenedores suelen responder en 6 días
Todos los issues de lambdaclass/ethlambda
Issues similares
-
Dificultad 1/5 Menos de una hora Aptitud para principiantes 88/100
bytecodealliance/wrpc#1785 ·
Los mantenedores suelen responder en 1 día
-
2 advisory ignore entries no longer match anything (`quick-xml` already patched in `Cargo.lock`)Abierto
Dificultad 1/5 Menos de una hora Aptitud para principiantes 85/100
Los mantenedores suelen responder en 1 día
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 78/100
longbridge/nsh#2758 · 1 comentario ·
Los mantenedores suelen responder en 1 día
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 84/100
antithesishq/bombadil#473 ·
Los mantenedores suelen responder en 2 días
-
bench/api.sh exec test fails with curl exit 52, and --ignore-failure still records the timingsAbiertobug
Dificultad 2/5 1-3 horas Aptitud para principiantes 72/100
libracoder/kiri#669 ·
Los mantenedores suelen responder en 1 día