Site connector (CLI/Newt 1.26) fails registration with “Site last hole punch is too old” while older Newt works on same network
Mantenedores costumam responder em até 1 dia
Ninguém assumiu esta issue ainda.
Avaliação
- Dificuldade
- 4/5
- Tempo estimado
- 3-5 dias
- Facilidade para iniciantes
- 38/100
- Tipo de issue
- Bug
- Clareza
- Razoavelmente clara
- Status de atividade
- Ativa
- Stack de tecnologia
- go, linux
- Domínio
- networking
Direção de pesquisa
Start by tracing the CLI site's registration and hole-punch flow, then compare it with the older Newt path; the payload does not name source files or tests. Check how the site identifies its network address and handles relay fallback, using the reported UDP ports and timeout logs as clues. Done means the CLI site registers and receives a working peer configuration, through hole-punch or relay.
Escrita pelo modelo de indexação a partir do texto da issue.
Descrição
Describe the Bug
I am migrating from the Newt site connector to the now recommended Pangolin CLI site connector. The old Newt site works reliably. A newly created site using the current CLI binary on a Proxmox LXC container consistently fails to register.
Environment
- OS Type & Version: Ubuntu 26.04 LTS (Pangolin server VPS) Debian 13 (Pangolin CLI LXC)
- Pangolin Version: 1.26.0
- Gerbil Version: 1.8.0
- Traefik Version: 3.7.17
- Newt Version: 1.20.0
- Client Version: 0.21.0
To Reproduce
Creating a new CLI binary install on a Proxmox LXC container and attempting to connect to my self-hosted Pangolin server fails. Proxmox is on the latest 9.2 version, with tun access given to the LXC.
Inspecting server-side logs, I see:
Site last hole punch is too old; skipping this register.
The site is failing to hole punch and identify its network address with the server.
Can the site reach the server on its Relay UDP port?
From the client side, I see the following logs:
Websocket connected
Connecting to endpoint: pangolin.labnest.net
SendMessageInterval timed out after 16 attempts for message type: newt/wg/get-config
Initial reliable ping failed... failed to read ICMP packet: i/o timeout
(repeated ping timeouts)
UDP packets from the LXC reach my VPS on both ports 51820 and 21820 (confirmed with tcpdump and nc -u). I verified no firewall is blocking the ports.
When started with -native flag, the site does create a WireGuard interface and receives a tunnel IP, but never completes registration and never receives a working peer config.
I have tried fully deleting and recreating the site and get the same error. Setting a static port also doesn't help.
I compared ip addr and wg show between the working Newt and failing CLI sites. Both create an interface and get a tunnel IP.
AI Disclosure
Utilized Grok to troubleshoot error logs and attempt to get the connection working. Also used it to help me write this issue.
Expected Behavior
The CLI site should complete hole-punch (or fall back to relay) and receive a WireGuard configuration.
- Linguagem predominante
- Go
- Estrelas
- 70
- Forks
- 26
- Merge médio
- 4h 19min
- PRs com merge (30d)
- 11
Preparar o ambiente
- Inclui um Dockerfile ou arquivo Docker Compose
- Tem um modelo de pull request
- Ler o guia de contribuição
Primeiros passos
- Leia a issue inteira e depois o guia de contribuição do projeto.
- Comente na issue dizendo que vai assumir — evita que duas pessoas façam o mesmo trabalho.
- Faça um fork do repositório e trabalhe em uma branch.
- Abra um pull request que referencie o número da issue.
Mais de fosrl/cli
-
Dificuldade 2/5 1-3 horas Facilidade para iniciantes 72/100
Mantenedores costumam responder em até 1 dia
-
bug
Dificuldade 2/5 1-3 horas Facilidade para iniciantes 76/100
Mantenedores costumam responder em até 1 dia
-
Dificuldade 2/5 1-3 horas Facilidade para iniciantes 56/100
Mantenedores costumam responder em até 1 dia
-
Automatic Site UpdatesAberta
Dificuldade 3/5 1-2 dias Facilidade para iniciantes 53/100
fosrl/cli#179 · 13 comentários ·
Mantenedores costumam responder em até 1 dia
-
needs investigating
fosrl/cli#74 · 4 comentários · 2 reações ·
Mantenedores costumam responder em até 1 dia
Issues semelhantes
-
Dificuldade 1/5 Menos de uma hora Facilidade para iniciantes 62/100
slavakurilyak/awesome-ai-agents#1005 ·
-
agent-research-finding chore
Dificuldade 2/5 1-3 horas Facilidade para iniciantes 78/100
jordansmall/spindrift#7370 ·
Mantenedores costumam responder em até 1 dia
-
☢️ Bug v3
Dificuldade 2/5 1-3 horas Facilidade para iniciantes 82/100
Mantenedores costumam responder em até 1 dia
-
The repo's gates check is clean and runs need no swapsTalvez já em andamento @turbot-agent-fleet assumiu hoje. Abertaagent:ready
Dificuldade 2/5 1-3 horas Facilidade para iniciantes 64/100
turbot/tailpipe#677 · 2 comentários ·
Mantenedores costumam responder em até 1 dia
-
Dificuldade 2/5 1-3 horas Facilidade para iniciantes 62/100
elecnix/terraform-permcheck#229 ·
Mantenedores costumam responder em até 1 dia