Site connector (CLI/Newt 1.26) fails registration with “Site last hole punch is too old” while older Newt works on same network
メンテナーはふだん 1 日以内に返信
まだ誰も着手していません。
評価
- 難易度
- 4/5
- 見積もり時間
- 3〜5日
- 初心者へのやさしさ
- 38/100
- issue の種類
- バグ
- 明瞭さ
- おおむね明確
- 活発さ
- 活発
- 技術スタック
- go, linux
- 領域
- networking
調査の方向性
Start by tracing the CLI site's registration and hole-punch flow, then compare it with the older Newt path; the payload does not name source files or tests. Check how the site identifies its network address and handles relay fallback, using the reported UDP ports and timeout logs as clues. Done means the CLI site registers and receives a working peer configuration, through hole-punch or relay.
索引モデルが issue の本文から書いたものです。
説明
Describe the Bug
I am migrating from the Newt site connector to the now recommended Pangolin CLI site connector. The old Newt site works reliably. A newly created site using the current CLI binary on a Proxmox LXC container consistently fails to register.
Environment
- OS Type & Version: Ubuntu 26.04 LTS (Pangolin server VPS) Debian 13 (Pangolin CLI LXC)
- Pangolin Version: 1.26.0
- Gerbil Version: 1.8.0
- Traefik Version: 3.7.17
- Newt Version: 1.20.0
- Client Version: 0.21.0
To Reproduce
Creating a new CLI binary install on a Proxmox LXC container and attempting to connect to my self-hosted Pangolin server fails. Proxmox is on the latest 9.2 version, with tun access given to the LXC.
Inspecting server-side logs, I see:
Site last hole punch is too old; skipping this register.
The site is failing to hole punch and identify its network address with the server.
Can the site reach the server on its Relay UDP port?
From the client side, I see the following logs:
Websocket connected
Connecting to endpoint: pangolin.labnest.net
SendMessageInterval timed out after 16 attempts for message type: newt/wg/get-config
Initial reliable ping failed... failed to read ICMP packet: i/o timeout
(repeated ping timeouts)
UDP packets from the LXC reach my VPS on both ports 51820 and 21820 (confirmed with tcpdump and nc -u). I verified no firewall is blocking the ports.
When started with -native flag, the site does create a WireGuard interface and receives a tunnel IP, but never completes registration and never receives a working peer config.
I have tried fully deleting and recreating the site and get the same error. Setting a static port also doesn't help.
I compared ip addr and wg show between the working Newt and failing CLI sites. Both create an interface and get a tunnel IP.
AI Disclosure
Utilized Grok to troubleshoot error logs and attempt to get the connection working. Also used it to help me write this issue.
Expected Behavior
The CLI site should complete hole-punch (or fall back to relay) and receive a WireGuard configuration.
- 主要言語
- Go
- スター
- 70
- フォーク
- 26
- 平均マージ
- 4時間 19分
- マージ済み PR(30日)
- 11
環境構築
- Dockerfile または Docker Compose ファイルあり
- プルリクエストのテンプレートあり
- コントリビューションガイドを読む
はじめの一歩
- issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
- 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
- リポジトリをフォークし、ブランチを切って変更します。
- issue 番号を参照したプルリクエストを送ります。
fosrl/cli のほかの issue
-
難易度 2/5 1〜3時間 初心者へのやさしさ 72/100
メンテナーはふだん 1 日以内に返信
-
bug
難易度 2/5 1〜3時間 初心者へのやさしさ 76/100
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 56/100
メンテナーはふだん 1 日以内に返信
-
難易度 3/5 1〜2日 初心者へのやさしさ 53/100
メンテナーはふだん 1 日以内に返信
-
needs investigating
fosrl/cli#74 · コメント 4 件 · リアクション 2 件 ·
メンテナーはふだん 1 日以内に返信
似ている issue
-
難易度 1/5 1時間未満 初心者へのやさしさ 62/100
slavakurilyak/awesome-ai-agents#1005 ·
-
agent-research-finding chore
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
jordansmall/spindrift#7370 ·
メンテナーはふだん 1 日以内に返信
-
☢️ Bug v3
難易度 2/5 1〜3時間 初心者へのやさしさ 82/100
メンテナーはふだん 1 日以内に返信
-
The repo's gates check is clean and runs need no swaps対応中かも @turbot-agent-fleet が今日担当しました。 オープンagent:ready
難易度 2/5 1〜3時間 初心者へのやさしさ 64/100
turbot/tailpipe#677 · コメント 2 件 ·
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 62/100
elecnix/terraform-permcheck#229 ·
メンテナーはふだん 1 日以内に返信