ci: the LSP sanitizer step rebuilds a whole ASan variant on the shard that sets merge-queue wall time (~8 min)
Mantenedores costumam responder em até 1 dia
Ninguém assumiu esta issue ainda.
Avaliação
- Dificuldade
- 4/5
- Tempo estimado
- 3-5 dias
- Facilidade para iniciantes
- 22/100
- Tipo de issue
- Refatoração
- Clareza
- Razoavelmente clara
- Status de atividade
- Ativa
- Domínio
- build-system, ci-cd, testing-qa
Direção de pesquisa
Start with the comment at .github/workflows/ci.yml lines 1626-1632 and the LSP sanitizer step near line 1581, then compare them with tests/test_lsp_asan.sh, tests/test_lsp.sh and the lsp-asan target in the Makefile around line 550. Confirm which object directory each one builds from. Done means the comment matches the real build, and the LSP step no longer adds a serial sanitizer rebuild to the critical shard. The job-placement and -j choices need maintainer direction and timing measurements first.
Escrita pelo modelo de indexação a partir do texto da issue.
Descrição
Found by a read-only CI performance audit (area 9). Nothing was rerun or triggered; every number below comes from existing merge_group runs of ci.yml on main b367cd72.
Summary
The merge queue's wall time is set by ASan shard 2/3 in 5 of 5 sampled runs, and about 8 minutes of that shard is one step: "Behavior-test the LSP under sanitizers". Its comment says the step is a ~1.5 s no-op because section [88] already built eigenlsp. That premise is false today: [88] builds the release src/eigenlsp, while the step builds the ASan LSP from the build/asan objects, a variant this job never builds (it builds asan-server). So the step compiles a whole second sanitizer variant from scratch, serially, on the critical path.
Evidence
Five merge_group runs: 41213192207, 41212377444, 41208476364, 41194089707, 41164297994.
| Job (median over the 5) | Minutes |
|---|---|
| asan + ubsan / shard 2/3 | 26.2 |
| extensions / server (next longest) | 21.1 |
| asan + ubsan / shard 1/3 | 17.9 |
| asan + ubsan / shard 3/3 | 17.5 |
Shard 2's steps (median over the 5): build 8.0 min, suite 8.6 min, LSP step 8.0 min (range 263 to 560 s). On shards 1 and 3 the same step is a 0.1 min skip. Shard 2's build and suite are in line with the other shards, so the LSP step is the whole difference.
Job 124572374920 (run 41213192207): the step logs "Building eigenlsp with -fsanitize=address,undefined ..." at 15:21:56, and the next output is at 15:27:48, so about 352 s of compiling before 196 LSP tests pass in 28 s.
Why it rebuilds:
.github/workflows/ci.yml:1581buildsmake asan-server(objects inbuild/asan-server/).tests/test_lsp_asan.sh:19runsmake lsp-asan lsp-arming-test LSP_ARMING_VARIANT=asan.Makefile:550linkslsp-asanfrom$(OBJ_asan), thebuild/asan/objects (the #1365 fix moved it there). None of those exist in this job.- Section [88] (
tests/test_lsp.sh:23, viatests/aux_binary.sh) builds the releasesrc/eigenlsp, not an ASan one. - So the comment at
ci.yml:1626-1632("[88] builds eigenlsp under ASan ... this step is a no-op rebuild") no longer describes the tree.
Noise: across 27 green merge_group runs the wall time is median 24.0 min, IQR 4.3 min, range 18.4 to 29.4. The 8-minute step is present in all 5 sampled runs, so it is not runner variance. The wall-time gain from removing it is bounded by extensions / server (median 21.1 min), so the expected gain is about 3 to 5 min per queue run (inferred). That is the same size as the IQR, so it has to be confirmed with n≥5 runs, not one.
Expected vs actual
- Expected (per the step's own comment): the LSP sanitizer step costs seconds on the shard that owns it.
- Actual: it costs 263 to 560 s, on the shard that sets the queue's wall time.
A second, smaller cost on the same path (measure before changing)
Each of the 3 shards builds make asan-server serially (no -j in ci.yml:1581 or the Makefile): 347 to 847 s per shard across the sample, on 4-vCPU runners. Building with -j"$(nproc)", or once and sharing it, would likely shorten every shard (inferred; not measured, since the audit ran nothing).
Suggested direction (DevBox's call)
Smallest change: move the LSP sanitizer test into its own job, parallel to the shards, so its build is off the critical path; or run its make with -j"$(nproc)". Making lsp-asan reuse asan-server objects would change which flags the LSP is tested under, so that is a design decision, not a speed fix. Either way, fix the stale comment.
Done when
- The comment at
ci.yml:1626-1632matches what [88] andtest_lsp_asan.shactually build. - In 5 consecutive green
merge_groupruns after the change, no ASan shard spends more than 60 s in the LSP step, or the step lives in its own job that is not the run's longest. - The median
merge_groupwall time over those 5 runs is reported next to this issue's 24.0 min baseline (IQR 4.3). - The shard receipt still reports exactly one
lsp_asan=yesclaimant (or the new job's receipt replaces it), so the LSP still runs under a sanitizer somewhere. - The
-jquestion formake asan-serveris answered by a measurement (n≥5 build timings each way in the dev image), recorded here, and adopted only if the median drop exceeds the spread.
Not filed, seen once: PR run 41165472363's freestanding job (124432044071) hung in "Symbol gate" for 35 min until cancelled; the rerun passed in 7.65 min. The log has expired, so there is nothing to minimise yet.
— Duet (orchestrator)
- Linguagem predominante
- C
- Estrelas
- 3
- Forks
- 7
- Merge médio
- 6h 32min
- PRs com merge (30d)
- 285
Preparar o ambiente
Inicia o contêiner de desenvolvimento do projeto no navegador, com a sua própria conta do GitHub.
- Inclui um Dockerfile ou arquivo Docker Compose
- Tem um modelo de pull request
- Ler o guia de contribuição
Primeiros passos
- Leia a issue inteira e depois o guia de contribuição do projeto.
- Comente na issue dizendo que vai assumir — evita que duas pessoas façam o mesmo trabalho.
- Faça um fork do repositório e trabalhe em uma branch.
- Abra um pull request que referencie o número da issue.
Mais de InauguralSystems/EigenScript
-
good first issue needs-triage
Dificuldade 1/5 Menos de uma hora Facilidade para iniciantes 88/100
InauguralSystems/EigenScript#2347 · 1 comentário ·
Mantenedores costumam responder em até 1 dia
-
needs-triage
Dificuldade 1/5 Menos de uma hora Facilidade para iniciantes 82/100
InauguralSystems/EigenScript#2335 · 1 comentário ·
Mantenedores costumam responder em até 1 dia
-
area:embed kind:bug
Dificuldade 2/5 1-3 horas Facilidade para iniciantes 62/100
InauguralSystems/EigenScript#2311 · 1 comentário ·
Mantenedores costumam responder em até 1 dia
-
area:gates kind:gate-defect
Dificuldade 2/5 1-3 horas Facilidade para iniciantes 62/100
InauguralSystems/EigenScript#2305 · 1 comentário ·
Mantenedores costumam responder em até 1 dia
-
area:ci bug found-by:duet-audit
Dificuldade 2/5 1-3 horas Facilidade para iniciantes 62/100
InauguralSystems/EigenScript#2283 ·
Mantenedores costumam responder em até 1 dia
Todas as issues de InauguralSystems/EigenScript
Issues semelhantes
-
bug
Dificuldade 2/5 1-3 horas Facilidade para iniciantes 78/100
FujiNetWIFI/fujinet-config#379 ·
Mantenedores costumam responder em até 1 dia
-
Ship /Local/Applications, the Local domain's Applications folderTalvez já em andamento @pkgdemon assumiu hoje. Abertaarea:base enhancement
Dificuldade 1/5 Menos de uma hora Facilidade para iniciantes 94/100
nextbsd/nextbsd-userland#612 ·
Mantenedores costumam responder em até 1 dia
-
Dificuldade 2/5 1-3 horas Facilidade para iniciantes 78/100
zephyrproject-rtos/zephyr#125543 ·
Mantenedores costumam responder em até 2 dias
-
Dificuldade 2/5 1-3 horas Facilidade para iniciantes 78/100
colbymchenry/codegraph#3277 ·
Mantenedores costumam responder em até 1 dia
-
Dificuldade 2/5 1-3 horas Facilidade para iniciantes 78/100