ci: the LSP sanitizer step rebuilds a whole ASan variant on the shard that sets merge-queue wall time (~8 min)
Les mainteneurs répondent en général sous 1 jour
Personne n'a encore pris cette issue.
Évaluation
- Difficulté
- 4/5
- Temps estimé
- 3-5 jours
- Accessibilité débutants
- 22/100
- Type d'issue
- Refactorisation
- Clarté
- Plutôt claire
- Activité
- Active
- Domaine
- build-system, ci-cd, testing-qa
Piste de recherche
Start with the comment at .github/workflows/ci.yml lines 1626-1632 and the LSP sanitizer step near line 1581, then compare them with tests/test_lsp_asan.sh, tests/test_lsp.sh and the lsp-asan target in the Makefile around line 550. Confirm which object directory each one builds from. Done means the comment matches the real build, and the LSP step no longer adds a serial sanitizer rebuild to the critical shard. The job-placement and -j choices need maintainer direction and timing measurements first.
Rédigé par le modèle d'indexation à partir du texte de l'issue.
Description
Found by a read-only CI performance audit (area 9). Nothing was rerun or triggered; every number below comes from existing merge_group runs of ci.yml on main b367cd72.
Summary
The merge queue's wall time is set by ASan shard 2/3 in 5 of 5 sampled runs, and about 8 minutes of that shard is one step: "Behavior-test the LSP under sanitizers". Its comment says the step is a ~1.5 s no-op because section [88] already built eigenlsp. That premise is false today: [88] builds the release src/eigenlsp, while the step builds the ASan LSP from the build/asan objects, a variant this job never builds (it builds asan-server). So the step compiles a whole second sanitizer variant from scratch, serially, on the critical path.
Evidence
Five merge_group runs: 41213192207, 41212377444, 41208476364, 41194089707, 41164297994.
| Job (median over the 5) | Minutes |
|---|---|
| asan + ubsan / shard 2/3 | 26.2 |
| extensions / server (next longest) | 21.1 |
| asan + ubsan / shard 1/3 | 17.9 |
| asan + ubsan / shard 3/3 | 17.5 |
Shard 2's steps (median over the 5): build 8.0 min, suite 8.6 min, LSP step 8.0 min (range 263 to 560 s). On shards 1 and 3 the same step is a 0.1 min skip. Shard 2's build and suite are in line with the other shards, so the LSP step is the whole difference.
Job 124572374920 (run 41213192207): the step logs "Building eigenlsp with -fsanitize=address,undefined ..." at 15:21:56, and the next output is at 15:27:48, so about 352 s of compiling before 196 LSP tests pass in 28 s.
Why it rebuilds:
.github/workflows/ci.yml:1581buildsmake asan-server(objects inbuild/asan-server/).tests/test_lsp_asan.sh:19runsmake lsp-asan lsp-arming-test LSP_ARMING_VARIANT=asan.Makefile:550linkslsp-asanfrom$(OBJ_asan), thebuild/asan/objects (the #1365 fix moved it there). None of those exist in this job.- Section [88] (
tests/test_lsp.sh:23, viatests/aux_binary.sh) builds the releasesrc/eigenlsp, not an ASan one. - So the comment at
ci.yml:1626-1632("[88] builds eigenlsp under ASan ... this step is a no-op rebuild") no longer describes the tree.
Noise: across 27 green merge_group runs the wall time is median 24.0 min, IQR 4.3 min, range 18.4 to 29.4. The 8-minute step is present in all 5 sampled runs, so it is not runner variance. The wall-time gain from removing it is bounded by extensions / server (median 21.1 min), so the expected gain is about 3 to 5 min per queue run (inferred). That is the same size as the IQR, so it has to be confirmed with n≥5 runs, not one.
Expected vs actual
- Expected (per the step's own comment): the LSP sanitizer step costs seconds on the shard that owns it.
- Actual: it costs 263 to 560 s, on the shard that sets the queue's wall time.
A second, smaller cost on the same path (measure before changing)
Each of the 3 shards builds make asan-server serially (no -j in ci.yml:1581 or the Makefile): 347 to 847 s per shard across the sample, on 4-vCPU runners. Building with -j"$(nproc)", or once and sharing it, would likely shorten every shard (inferred; not measured, since the audit ran nothing).
Suggested direction (DevBox's call)
Smallest change: move the LSP sanitizer test into its own job, parallel to the shards, so its build is off the critical path; or run its make with -j"$(nproc)". Making lsp-asan reuse asan-server objects would change which flags the LSP is tested under, so that is a design decision, not a speed fix. Either way, fix the stale comment.
Done when
- The comment at
ci.yml:1626-1632matches what [88] andtest_lsp_asan.shactually build. - In 5 consecutive green
merge_groupruns after the change, no ASan shard spends more than 60 s in the LSP step, or the step lives in its own job that is not the run's longest. - The median
merge_groupwall time over those 5 runs is reported next to this issue's 24.0 min baseline (IQR 4.3). - The shard receipt still reports exactly one
lsp_asan=yesclaimant (or the new job's receipt replaces it), so the LSP still runs under a sanitizer somewhere. - The
-jquestion formake asan-serveris answered by a measurement (n≥5 build timings each way in the dev image), recorded here, and adopted only if the median drop exceeds the spread.
Not filed, seen once: PR run 41165472363's freestanding job (124432044071) hung in "Symbol gate" for 35 min until cancelled; the rerun passed in 7.65 min. The log has expired, so there is nothing to minimise yet.
— Duet (orchestrator)
- Langage dominant
- C
- Étoiles
- 3
- Forks
- 7
- Merge moyen
- 6 h 32 min
- PR mergées (30 j)
- 285
Préparer son environnement
Lance le conteneur de développement du projet dans votre navigateur, avec votre propre compte GitHub.
- Fournit un Dockerfile ou un fichier Docker Compose
- Propose un modèle de pull request
- Lire le guide de contribution
Par où commencer
- Lisez l'issue en entier, puis le guide de contribution du projet.
- Signalez en commentaire que vous la prenez — cela évite que deux personnes fassent le même travail.
- Forkez le dépôt et travaillez sur une branche.
- Ouvrez une pull request qui référence le numéro de l'issue.
Autres issues de InauguralSystems/EigenScript
-
good first issue needs-triage
Difficulté 1/5 Moins d'une heure Accessibilité débutants 88/100
InauguralSystems/EigenScript#2347 · 1 commentaire ·
Les mainteneurs répondent en général sous 1 jour
-
needs-triage
Difficulté 1/5 Moins d'une heure Accessibilité débutants 82/100
InauguralSystems/EigenScript#2335 · 1 commentaire ·
Les mainteneurs répondent en général sous 1 jour
-
area:embed kind:bug
Difficulté 2/5 1-3 heures Accessibilité débutants 62/100
InauguralSystems/EigenScript#2311 · 1 commentaire ·
Les mainteneurs répondent en général sous 1 jour
-
area:gates kind:gate-defect
Difficulté 2/5 1-3 heures Accessibilité débutants 62/100
InauguralSystems/EigenScript#2305 · 1 commentaire ·
Les mainteneurs répondent en général sous 1 jour
-
area:ci bug found-by:duet-audit
Difficulté 2/5 1-3 heures Accessibilité débutants 62/100
InauguralSystems/EigenScript#2283 ·
Les mainteneurs répondent en général sous 1 jour
Toutes les issues de InauguralSystems/EigenScript
Issues similaires
-
bug
Difficulté 2/5 1-3 heures Accessibilité débutants 78/100
FujiNetWIFI/fujinet-config#379 ·
Les mainteneurs répondent en général sous 1 jour
-
Ship /Local/Applications, the Local domain's Applications folderPeut-être pris @pkgdemon l’a pris aujourd’hui. Ouvertearea:base enhancement
Difficulté 1/5 Moins d'une heure Accessibilité débutants 94/100
nextbsd/nextbsd-userland#612 ·
Les mainteneurs répondent en général sous 1 jour
-
Difficulté 2/5 1-3 heures Accessibilité débutants 78/100
zephyrproject-rtos/zephyr#125543 ·
Les mainteneurs répondent en général sous 2 jours
-
Difficulté 2/5 1-3 heures Accessibilité débutants 78/100
colbymchenry/codegraph#3277 ·
Les mainteneurs répondent en général sous 1 jour
-
Difficulté 2/5 1-3 heures Accessibilité débutants 78/100