Ch2 Sensor Data from INA226 via Commandline
Maintainers usually reply within 1 day
Nobody has claimed this yet.
Assessment
- Difficulty
- 3/5
- Estimated time
- 1-2 days
- Newbie friendliness
- 35/100
Research direction
The issue asks whether INA226 sensor telemetry shown in the web interface can be accessed from the console, but it names no files or tests. Start by finding where INA226 readings are collected and how web telemetry is exposed; then check whether the console has a comparable command. Done means the issue’s requested telemetry is available through the console, with its scope clarified first.
Written by the indexing model from the issue text.
Description
Hello, is this possible to get the WebInterface Telemetrie from Sensors like INA226 via Console? this was nice.
- Dominant language
- C
- Stars
- 3.9k
- Forks
- 1.5k
- Avg merge
- 1d 1h
- Merged PRs (30d)
- 26
Getting set up
This project ships no dev container, Dockerfile or contributing guide, so setting up is up to you: start from its README, and see our first-contribution guide for the general steps.
First steps
- Read the whole issue, then the project's contributing guide.
- Comment on the issue to say you are picking it up — it saves two people doing the same work.
- Fork the repository and make your change on a branch.
- Open a pull request that references the issue number.
More from meshcore-dev/MeshCore
-
Difficulty 2/5 1-3 hours Newbie friendliness 63/100
meshcore-dev/MeshCore#3622 ·
Maintainers usually reply within 1 day
-
[Feature Request] Set Australia (Mid) Preset to automatically enable 2 byte default path hash sizeOpen
Difficulty 2/5 1-3 hours Newbie friendliness 62/100
meshcore-dev/MeshCore#3571 · 5 reactions ·
Maintainers usually reply within 1 day
-
Difficulty 2/5 1-3 hours Newbie friendliness 74/100
meshcore-dev/MeshCore#3567 · 1 comment ·
Maintainers usually reply within 1 day
-
RTC_RX8130CE writes and reads the one-hot WEEK register as a numberPossibly taken A pull request linked to this issue is open or already merged. Open
Difficulty 2/5 1-3 hours Newbie friendliness 78/100
meshcore-dev/MeshCore#3549 ·
Maintainers usually reply within 1 day
-
Repeater: CLI reply to 'setperm <key> 0' is lost when the removed ACL entry sits before the requester (stale ClientInfo* after array shift)Possibly taken A pull request linked to this issue is open or already merged. Open
Difficulty 2/5 1-3 hours Newbie friendliness 77/100
meshcore-dev/MeshCore#3513 ·
Maintainers usually reply within 1 day
All issues in meshcore-dev/MeshCore
Similar issues
-
v9.6.0: CMake incorrectly enforces presence of libevdevPossibly taken A pull request linked to this issue is open or already merged. Open
Difficulty 2/5 1-3 hours Newbie friendliness 67/100
Maintainers usually reply within 1 day
-
[Bug] Unhandled ValueError terminates watchdog thread when GISRC value contains multiple colonsOpenbug
Difficulty 2/5 1-3 hours Newbie friendliness 76/100
Maintainers usually reply within 1 day
-
bug Component component: net
Difficulty 2/5 1-3 hours Newbie friendliness 78/100
RT-Thread/rt-thread#11913 · 1 comment ·
Maintainers usually reply within 1 day
-
Difficulty 2/5 1-3 hours Newbie friendliness 72/100
contiki-ng/contiki-ng#3289 ·
Maintainers usually reply within 3 days
-
area:docs help wanted type:enhancement
Difficulty 2/5 1-3 hours Newbie friendliness 76/100
Maintainers usually reply within 1 day