Hacktoberfest 2026:メンテナが10月に向けて印を付けた、オープンで初心者向けの issue。 Hacktoberfest の issue を見る

rtpengine mr10.5 crashed in __dtx_send_later

オープン
#1,817 コメント 13 件 リアクション 0 件 担当者 0 名 GitHub で見る

メンテナーはふだん 2 日以内に返信

まだ誰も着手していません。

評価

難易度
5/5
見積もり時間
1週間以上
初心者へのやさしさ
8/100
issue の種類
バグ
明瞭さ
説明が足りない
活発さ
停滞
技術スタック
c
領域
networking

調査の方向性

The crash is a SIGSEGV in decoder_input_data_ptime (codeclib.c:936), reached from __rtp_decode (codec.c:3682) called by __dtx_send_later (codec.c:3072) on the codec timer thread. Start by reading the DTX timer path around codec.c:3072 and how the huge ts value is produced from the channel's last_ts/first_send_ts fields shown in the dump, and note the reporter's claim that fix #1591 was already cherry-picked. Done means a reproduced input or a guarded fix verified under the transcoding/AMR DTX load described.

索引モデルが issue の本文から書いたものです。

説明

bug
rtpengine version the issue has been seen with

mr10.5.1

Used distribution and its version

Ubuntu 18.04.6 LTS

Linux kernel version used

No response

CPU architecture issue was seen on (see uname -m)

x86_64

Expected behaviour you didn't see

No response

Unexpected behaviour you saw

I am seeing a seldom crash, last week two hosts crashed independently.

Steps to reproduce the problem

Not sure, but there's one idea . Am I seeing it right that some endpoint is sending the RTP packet with huge ts causing this behavior?
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x000055bed2c174a5 in decoder_input_data_ptime (dec=0x7fc6ec17e690, data=0xc0089a793fe274df, ts=4715930405566051902, ptime=ptime@entry=0x7fc7bb5f9288,
callback=0x55bed2bebbe0 <packet_decoded_fifo>, u1=0x7fc73c089d90, u2=0x7fc7bb5f91c0) at codeclib.c:936

Additional program output to the terminal or logs illustrating the issue
Here is the backtrace:

(gdb) 
#0  0x000055bed2c174a5 in decoder_input_data_ptime (dec=0x7fc6ec17e690, data=0xc0089a793fe274df, ts=4715930405566051902, ptime=ptime@entry=0x7fc7bb5f9288, 
    callback=0x55bed2bebbe0 <packet_decoded_fifo>, u1=0x7fc73c089d90, u2=0x7fc7bb5f91c0) at codeclib.c:936
No locals.
#1  0x000055bed2bef42f in __rtp_decode (ch=<optimized out>, input_ch=0x7fc73c089d90, packet=<optimized out>, mp=0x7fc7bb5f91c0) at codec.c:3682
        ret = 0
#2  0x000055bed2bec9e7 in __dtx_send_later (ct=0x7fc6a401d5f0) at codec.c:3072
        dtxb = 0x7fc6a401d5f0
        mp_copy = {raw = {s = 0x0, len = 0}, fsin = {address = {family = 0x55bed2e51b80 <__socket_families>, u = {ipv4 = {s_addr = 113162329}, ipv6 = {__in6_u = {
                    __u6_addr8 = "Y\270\276\006", '\000' <repeats 11 times>, __u6_addr16 = {47193, 1726, 0, 0, 0, 0, 0, 0}, __u6_addr32 = {113162329, 0, 0, 0}}}}}, port = 26856}, tv = {
            tv_sec = 1713279718, tv_usec = 40418}, sfd = 0x7fc630056450, call = 0x7fc6fc0105a0, stream = 0x7fc71c0900d0, media = 0x7fc66c0d0810, media_out = 0x7fc62c0db7b0, sink = {
            sink = 0x7fc6cc111080, handler = 0x55bed2e486d0 <__sh_noop_rtp>, kernel_output_idx = -1, rtcp_only = 0, transcoding = 1}, rtp = 0x7fc48c038080, rtcp = 0x0, ssrc_in = 0x7fc69814a570, 
          ssrc_out = 0x7fc69814cbf0, payload = {s = 0x0, len = 0}, packets_out = {head = 0x0, tail = 0x0, length = 0}, ptime = -1}
        ret = 0
        ts = 4715930405566051902
        p_left = 7
        tv_diff = 130003
        ts_diff = 4715930405563795742
        dtxp = <optimized out>
        call = 0x7fc6fc0105a0
        ch = 0x7fc73c089d90
        ps = <optimized out>
        input_ch = 0x7fc73c089d90
        ptime = 20
#3  0x000055bed2bfb0c8 in timerthread_run (p=0x55bed2e53bc0 <codec_timers_thread>) at timerthread.c:62
        tt_obj = <optimized out>
        sleeptime = <optimized out>
        tv = <optimized out>
        tt = <optimized out>
        waker = {lock = 0x55bed2e53bc8 <codec_timers_thread+8>, cond = 0x55bed2e53bf0 <codec_timers_thread+48>}
#4  0x000055bed2b79f99 in thread_detach_func (d=0x55bed4f94e60) at aux.c:250
        __cancel_buf = {__cancel_jmp_buf = {{__cancel_jmp_buf = {94278105255520, -5219573935894328112, 140495818822912, 0, 140482340461232, 140720364687680, 5196924824070491344, 
                2084599588019342544}, __mask_was_saved = 0}}, __pad = {0x7fc7bb5f9450, 0x0, 0x0, 0x0}}
        __cancel_routine = 0x55bed2b79e00 <thread_detach_cleanup>
        __cancel_arg = 0x55bed4f94e60
        __not_first_call = <optimized out>
        dt = 0x55bed4f94e60
        t = <optimized out>
        scheduler = <optimized out>
#5  0x00007fc8104596db in start_thread (arg=0x7fc7bb5fa700) at pthread_create.c:463
        pd = 0x7fc7bb5fa700
        now = <optimized out>
        unwind_buf = {cancel_jmp_buf = {{jmp_buf = {140495818827520, -5219573935894328112, 140495818822912, 0, 94278105255520, 140720364687680, 5196924823827221712, 5188280515029208272}, 
              mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}}
        not_first_call = <optimized out>
#6  0x00007fc80fcf061f in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95

something more:

(gdb) fr 2
#2  0x000055bed2bec9e7 in __dtx_send_later (ct=0x7fc6a401d5f0) at codec.c:3072
3072	in codec.c
(gdb) p *enc
No symbol "enc" in current context.
(gdb) p *ch
$1 = {h = {obj = {ref = 21, free_func = 0x55bed2be91c0 <__free_ssrc_handler>, size = 376}, lock = {__data = {__lock = 0, __count = 0, __owner = 0, __nusers = 0, __kind = 0, __spins = 0, 
        __elision = 0, __list = {__prev = 0x0, __next = 0x0}}, __size = '\000' <repeats 39 times>, __align = 0}, ssrc = 3270805003, last_used = 1713279718}, handler = 0x7fc6bc0fb070, 
  decoder = 0x7fc6ec17e690, encoder = 0x7fc6b8110230, encoder_format = {clockrate = 16000, channels = 1, format = 1}, bitrate = 14250, ptime = 20, bytes_per_packet = 80, first_ts = 4800, 
  last_ts = 2256640, first_send = {tv_sec = 1713279436, tv_usec = 750421}, first_send_ts = 4160, output_skew = 0, sample_buffer = 0x7fc728157920, dtx_buffer = 0x7fc6a401d5f0, dtmf_dsp = 0x0, 
  dtmf_resampler = {swresample = 0x0, no_filter = false}, dtmf_format = {clockrate = 0, channels = 0, format = 0}, dtmf_ts = 0, last_dtmf_event_ts = 0, dtmf_events = {head = 0x0, tail = 0x0, 
    length = 0}, dtmf_event = {code = 0, volume = 0, ts = 0, rand_code = 0, block_dtmf = BLOCK_DTMF_OFF}, dtmf_state = {code = 0, volume = 0, ts = 0, rand_code = 0, block_dtmf = BLOCK_DTMF_OFF}, 
  silence_events = {head = 0x0, tail = 0x0, length = 0}, dtmf_start_ts = 0, dtmf_first_duration = 0, skip_pts = 0, rtp_mark = 0}


### Anything else?

The machines are doing transcoding and AMR DTX so the load is quite high.
We have manually picked the fix for #1591 to this locally built version.
主要言語
Perl
スター
992
フォーク
459
PR マージ指標
30日以内にマージされた PR はありません

環境構築

このプロジェクトには開発コンテナ、Dockerfile、コントリビューションガイドがありません。まず README を読み、一般的な手順ははじめてのコントリビューションガイドを参照してください。

はじめの一歩

  1. issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
  2. 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
  3. リポジトリをフォークし、ブランチを切って変更します。
  4. issue 番号を参照したプルリクエストを送ります。

sipwise/rtpengine のほかの issue

sipwise/rtpengine の issue をすべて見る

似ている issue

Perl の issue をもっと見る

新しい issue をメールで受け取る

初心者向けの GitHub issue を短くまとめたダイジェスト。