memory: file-lock test "stops refreshing a lock that was broken and re-taken" races its own heartbeat on a slow runner

オープン 初心者向け
#5,634 コメント 0 件 リアクション 0 件 担当者 0 名 GitHub で見る

メンテナーはふだん 1 日以内に返信

まだ誰も着手していません。

評価

難易度
2/5
見積もり時間
1〜3時間
初心者へのやさしさ
76/100
issue の種類
バグ
明瞭さ
明確に書かれている
活発さ
活発
技術スタック
typescript
領域
testing

調査の方向性

src/memory/__tests__/file-lock.test.tsから始め、withFileLockの「stops refreshing a lock that was broken and re-taken while it ran」という名前のテストを確認してください。モックされたutimes、readFileのスパイ、実際のタイマーがどのように連携するかを読み、そのうえでアサーションがランナーのスケジューリングに左右されないようにしてください。verify:no-test-retriesを指定して対象のテストを実行してください。遅いCIでも再試行なしで安定して成功すれば完了です。

索引モデルが issue の本文から書いたものです。

説明

chore server-memory v2

Problem

src/memory/__tests__/file-lock.test.ts > withFileLock > stops refreshing a lock that was broken and re-taken while it ran (#5418) failed on CI with AssertionError: expected 0 to be greater than 0 (Coverage memory, run 44417378815, job 135201148642, on PR #5628's caught-up head). That PR changes only src/git/; the test is unchanged on v2/main, including after #5623.

Cause

The test runs on real timers (staleMs: 200, so a heartbeat every 100 ms). The first heartbeat's utimes is mocked to replace the lock with another owner's and then resolve replacement. The operation then clears the readFile spy and expects, within a 250 ms sleep, at least one read of the lock: the next heartbeat seeing the new token and stopping.

On a loaded runner (the coverage leg is instrumented), the next heartbeat can read the lock before the operation resumes and clears the spy. That read is wiped, the heartbeat stops as intended, and no further read follows, so the count is 0. The behavior under test is correct; the assertion depends on scheduling.

Expected

The test passes regardless of runner speed, with no retry (verify:no-test-retries). For example: drive the heartbeat with fake timers, or count reads from the moment the replacement is made (inside the mocked utimes) instead of clearing after the operation resumes.

主要言語
TypeScript
スター
92k
フォーク
12k
平均マージ
3時間 46分
マージ済み PR(30日)
206

環境構築

はじめの一歩

  1. issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
  2. 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
  3. リポジトリをフォークし、ブランチを切って変更します。
  4. issue 番号を参照したプルリクエストを送ります。

modelcontextprotocol/servers のほかの issue

modelcontextprotocol/servers の issue をすべて見る

似ている issue

TypeScript の issue をもっと見る

新しい issue をメールで受け取る

初心者向けの GitHub issue を短くまとめたダイジェスト。