OV08F4 sensor subdevice lost after repeated open/close cycles on Dell Pro 14 Premium PA14250

オープン
#74 コメント 0 件 リアクション 0 件 担当者 0 名 GitHub で見る

まだ誰も着手していません。

評価

難易度
4/5
見積もり時間
3〜5日
初心者へのやさしさ
42/100
issue の種類
バグ
明瞭さ
説明が足りない
活発さ
静か
技術スタック
c, linux

調査の方向性

/etc/camera/ipu7x/libcamhal_configs.json から始め、ov08x40-uf.json のワークアラウンドを、実際の OVTI08F4 センサー名および availableSensors エントリと比較します。報告される SensorHwCtrl メッセージと V4l2_device_cc メッセージを監視しながら open/close サイクルを再現します。ワークアラウンドなしでセンサーが検出され、サイクルを繰り返した後も使用可能なままであれば完了です。

索引モデルが issue の本文から書いたものです。

説明

Hardware: Dell Pro 14 Premium PA14250 (Intel Lunar Lake)
Sensor: OVTI08F4 / OV08F4
Kernel: 6.17.0-29-generic
libcamhal: 0git202510170946.ec24db2-1ubuntu24.04.1
BIOS: 2.12.4

Bug 1: /etc/camera/ipu7x/libcamhal_configs.json lists ov08x40-uf-0
but actual sensor is OVTI08F4. HAL reports "No sensors available".
Workaround: copied ov08x40-uf.json as ov08f4-uf.json and added
ov08f4-uf-0 to availableSensors.

Bug 2: After 3-7 camera open/close cycles, HAL logs:
SensorHwCtrl: sensor output sub device is not set
V4l2_device_cc: Poll: Device node fd 22 poll timeout
RequestThread: waitFrame, time out happens, wait recovery
Camera becomes unusable until full reboot. Suspend/resume does not recover it.

Kernel detects sensor correctly at boot:
intel-ipu7: Found supported sensor OVTI08F4:00
intel-ipu7: Connected 1 cameras

主要言語
C
スター
14
フォーク
39
PR マージ指標
30日以内にマージされた PR はありません

環境構築

はじめの一歩

  1. issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
  2. 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
  3. リポジトリをフォークし、ブランチを切って変更します。
  4. issue 番号を参照したプルリクエストを送ります。

intel/ipu7-drivers のほかの issue

intel/ipu7-drivers の issue をすべて見る

似ている issue

C の issue をもっと見る

新しい issue をメールで受け取る

初心者向けの GitHub issue を短くまとめたダイジェスト。