Stacked bars: round the whole column (scope: 'stack')
メンテナーはふだん 1 日以内に返信
まだ誰も着手していません。
評価
- 難易度
- 5/5
- 見積もり時間
- 1週間以上
- 初心者へのやさしさ
- 35/100
- issue の種類
- 機能追加
- 明瞭さ
- おおむね明確
- 活発さ
- 活発
- 技術スタック
- typescript
調査の方向性
Start with the barY mark's radius handling and SceneRect cornerRadii, then trace how stack and group layouts determine each segment's geometry. The issue describes the required cases: thin exposed segments, negative and diverging stacks, barX, reversed scales, grouped columns, motion, and per-segment hit areas and focus. Done means the stack keeps a consistent rounded outline as its height and segment values change; the issue does not identify specific files or tests.
索引モデルが issue の本文から書いたものです。
説明
Description
A stacked column should read as one rounded bar. With the per-rect corner radii from #28, we round the outer end of the outermost segment and keep the inner seams square. That works as long as the outermost segment is at least as tall as the radius.
When the outermost segment is thin, the column loses its rounded end. The radius is scaled to fit the rect, the same way CSS does it. So a 2px segment gets 2px corners, and the larger segment below it stays square. Real data hits this all the time: in a revenue-per-category stack, the smallest category on top is often only one or two pixels tall in most columns.
Current behavior
barY(segments, {
x: 'week',
y: 'revenue',
z: 'category',
layout: stack({ order }),
// Per row: top-left/top-right on the outermost visible segment,
// bottom corners on the innermost one, 0 on the seams.
radius: stackedRadius,
})
- Outermost segment ≥ radius: the column is rounded.
- Outermost segment < radius: its corners shrink to its height, and the column looks square.
radius only receives the row, not pixel geometry. Even when it gets a pixel-aware resolver, a SceneRect with cornerRadii can't draw the right shape:
- The thin top segment would need a horizontal strip cut from the rounded column, with curved left and right edges.
- The segment below would need the rest of the curve.
Group clip is a plain ChartBounds rectangle, so we can't clip a column's segments to one rounded rect either.
Desired behavior
An option that rounds the whole stack instead of each segment. Every segment is drawn as its part of one rounded column, so the column's outline is always the same rounded rect, however the total is split.
- A segment that lies entirely within
radiuspx of an exposed end gets part of the curve. - Inner seams stay straight.
- It works for negative and diverging stacks (each exposed end is rounded), for
barX, and for reversed scales, like the{ end }form. - It works with
group()+ stack (paired columns) as well as a plain stack. - Motion: segments animate with the stack, and the curve follows the changing column height.
- Hit areas and focus stay per segment.
Possible API shapes, building on the existing forms:
radius: { end: 6, scope: 'stack' } // round the exposed end(s) of the stack
radius: { all: 6, scope: 'stack' } // also round the baseline end
Another option is a rounded group clip (SceneGroup.clip accepting corner radii), which a custom mark could use per column. A scope option on the bar mark would be the more natural API, though.
Prior art
Highcharts has exactly this: borderRadius: { radius, scope: 'stack' | 'point', where: 'end' | 'all' }. From its API docs:
The value
stackmeans the rounding will apply to the full stack, so that only points close to the top or bottom will receive rounding.
Internally it computes the rounding against the stack's total box and not against each point's box (borderRadius.scope === 'stack' in the column series).
Our workaround today
We resolve a corner tuple per row, from the same rows the mark draws and in stack order. It skips zero and null segments so a missing category doesn't hold the rounding away from the visible end. That covers seams and missing values, but it can't fix the thin-end case above. The only alternatives we found change the data (a minimum segment height) or depend on wrapping barY's scene output, which we'd rather not maintain.
Version: @tanstack/charts 1.0.0, SVG renderer with motion().
Related: #28
- 主要言語
- TypeScript
- スター
- 870
- フォーク
- 57
- 平均マージ
- 11時間 58分
- マージ済み PR(30日)
- 18
環境構築
- Dockerfile・Docker Compose ファイルなし
- プルリクエストのテンプレートなし
- コントリビューションガイドを読む
はじめの一歩
- issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
- 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
- リポジトリをフォークし、ブランチを切って変更します。
- issue 番号を参照したプルリクエストを送ります。
TanStack/charts のほかの issue
-
[Perf] Canvas layer composition is quadratic: splitRenderLayers re-copies the node array per nodeオープン
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
メンテナーはふだん 1 日以内に返信
-
[Bug] Focus guides: `url(#id)` paints ignore `idPrefix`対応中かも @getdownandcode が 37 日前に担当しました。 オープン
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
TanStack/charts#211 · コメント 1 件 ·
メンテナーはふだん 1 日以内に返信
-
Add reverse options to waffleY and waffleX対応中かも @tannerlinsley が今日担当しました。 オープン
難易度 2/5 1〜3時間 初心者へのやさしさ 25/100
メンテナーはふだん 1 日以内に返信
-
難易度 4/5 3〜5日 初心者へのやさしさ 55/100
メンテナーはふだん 1 日以内に返信
-
難易度 4/5 3〜5日 初心者へのやさしさ 48/100
メンテナーはふだん 1 日以内に返信
TanStack/charts の issue をすべて見る
似ている issue
-
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
fb55/htmlparser2#2579 ·
メンテナーはふだん 1 日以内に返信
-
bug good first issue needs-review
難易度 1/5 1〜3時間 初心者へのやさしさ 83/100
メンテナーはふだん 1 日以内に返信
-
Add Module DB Rulesオープンdocumentation public
難易度 1/5 1〜3時間 初心者へのやさしさ 68/100
midnightntwrk/umbradb#65 ·
メンテナーはふだん 2 日以内に返信
-
area/channels kind/bug priority/medium
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
nanocoai/nanoclaw#4501 · コメント 1 件 ·
メンテナーはふだん 1 日以内に返信
-
needs verification
難易度 2/5 1〜3時間 初心者へのやさしさ 74/100
メンテナーはふだん 13 日以内に返信