Generic PCL6/pxlcolor PPD causes severe delays when printing multiple copies at 1200 dpi
まだ誰も着手していません。
評価
- 難易度
- 4/5
- 見積もり時間
- 3〜5日
- 初心者へのやさしさ
- 48/100
- issue の種類
- バグ
- 明瞭さ
- おおむね明確
- 活発さ
- 活発
- 技術スタック
- linux
- 領域
- backend
調査の方向性
Start by locating the generic PCL 6/PCL XL pxlcolor PPD and its filter definitions, then trace how copy counts reach the direct PDF-to-Foomatic path. Check whether the PPD can advertise hardware copies and compare generated output for multiple-copy jobs. Done means copy counts work through the supported path and the printer can render the page once for consecutive copies; confirm behavior across printer models.
索引モデルが issue の本文から書いたものです。
説明
Environment
- Printer: OKI C532dn
- Connection: socket://192.168.0.8:9100
- CUPS: 2.4.7-1.2ubuntu7.14
- libcupsfilters: 2.0.0-0ubuntu7.2
- libppd: 2.0.0-0ubuntu4.1
- Driver: Generic PCL 6/PCL XL Printer Foomatic/pxlcolor
Problem
When printing multiple copies of a graphics-intensive, single-page PDF at 1200 × 1200 dpi, the printer pauses for processing between every copy.
At 600 × 600 dpi, the same behavior is not visibly problematic.
The generated PCL XL data for one page is approximately 178 MiB.
Cause identified
The generated PPD contains:
*cupsManualCopies: True
*cupsFilter: "application/vnd.cups-postscript 100 foomatic-rip"
*cupsFilter: "application/vnd.cups-pdf 0 foomatic-rip"
CUPS expands multiple copies into separate pages before rendering.
Changing cupsManualCopies to False prevents this expansion, but the direct PDF-to-Foomatic path then produces only one physical copy when multiple copies are requested.
Working workaround
- Set
cupsManualCopies: False - Remove the direct
application/vnd.cups-pdffilter entry - Retain the PostScript-to-Foomatic filter
- Set the appropriate color-mode defaults
With this configuration, two copies are printed consecutively without processing delays, at 1200 × 1200 dpi in color.
Observed test results
- Original configuration, 2 copies: PDF-to-PostScript output contains 2 pages, approximately 119 MiB
- Modified PPD, 2 copies: PDF-to-PostScript output contains 1 page with
%RBINumCopies: 2, approximately 60 MiB - Final PCL XL output: approximately 178 MiB, rendered once
- Physical printer test: 2 copies printed without processing delay
Request
Please investigate whether the generic pxlcolor PPD could support hardware copy generation where available, and whether copy-count propagation in the direct PDF-to-Foomatic filter path can be corrected.
AI assistance disclosure
This issue was investigated with the assistance of ChatGPT.
I encountered the problem on my own printer and personally executed all diagnostic commands, printing tests, and configuration changes. All reported measurements and printing results were obtained from my actual system.
ChatGPT assisted with troubleshooting, interpreting the results, developing the workaround, and preparing this report.
The workaround has been verified on my OKI C532dn, but has not been tested on other printer models.
- 主要言語
- HTML
- スター
- 14
- フォーク
- 26
- PR マージ指標
- 30日以内にマージされた PR はありません
環境構築
このプロジェクトには開発コンテナ、Dockerfile、コントリビューションガイドがありません。まず README を読み、一般的な手順ははじめてのコントリビューションガイドを参照してください。
はじめの一歩
- issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
- 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
- リポジトリをフォークし、ブランチを切って変更します。
- issue 番号を参照したプルリクエストを送ります。
OpenPrinting/foomatic-db のほかの issue
-
難易度 4/5 3〜5日 初心者へのやさしさ 42/100
OpenPrinting/foomatic-db#64 ·
-
難易度 4/5 3〜5日 初心者へのやさしさ 38/100
OpenPrinting/foomatic-db#52 · コメント 5 件 ·
-
foo2hp link doesn't work再び着手できるかも @tillkamppeter が 646 日前に担当しましたが、オープン中のプルリクエストはありません。 オープン
OpenPrinting/foomatic-db#49 · コメント 3 件 · 担当者 1 名 ·
-
難易度 2/5 1〜3時間 初心者へのやさしさ 45/100
OpenPrinting/foomatic-db#42 ·
-
難易度 5/5 1週間以上 初心者へのやさしさ 25/100
OpenPrinting/foomatic-db#37 ·
OpenPrinting/foomatic-db の issue をすべて見る
似ている issue
-
due_at is one hour late on the autumn DST change day (real-time delta added to a zoneinfo datetime)オープン
難易度 2/5 1〜3時間 初心者へのやさしさ 74/100
-
難易度 2/5 1〜3時間 初心者へのやさしさ 65/100
openwebwork/webwork2#3295 ·
メンテナーはふだん 4 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 77/100
open-feature/python-sdk-contrib#482 ·
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 75/100
Trust-Analysis/Tokenized-Fractional-#1090 ·
メンテナーはふだん 2 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
LadybirdBrowser/ladybird#15164 ·
メンテナーはふだん 1 日以内に返信