Generic PCL6/pxlcolor PPD causes severe delays when printing multiple copies at 1200 dpi
Nadie ha tomado este issue todavía.
Evaluación
- Dificultad
- 4/5
- Tiempo estimado
- 3-5 días
- Aptitud para principiantes
- 48/100
- Tipo de issue
- Error
- Claridad
- Bastante claro
- Estado de actividad
- Activo
- Stack tecnológico
- linux
- Área
- backend
Línea de trabajo
Start by locating the generic PCL 6/PCL XL pxlcolor PPD and its filter definitions, then trace how copy counts reach the direct PDF-to-Foomatic path. Check whether the PPD can advertise hardware copies and compare generated output for multiple-copy jobs. Done means copy counts work through the supported path and the printer can render the page once for consecutive copies; confirm behavior across printer models.
Escrito por el modelo de indexación a partir del texto del issue.
Descripción
Environment
- Printer: OKI C532dn
- Connection: socket://192.168.0.8:9100
- CUPS: 2.4.7-1.2ubuntu7.14
- libcupsfilters: 2.0.0-0ubuntu7.2
- libppd: 2.0.0-0ubuntu4.1
- Driver: Generic PCL 6/PCL XL Printer Foomatic/pxlcolor
Problem
When printing multiple copies of a graphics-intensive, single-page PDF at 1200 × 1200 dpi, the printer pauses for processing between every copy.
At 600 × 600 dpi, the same behavior is not visibly problematic.
The generated PCL XL data for one page is approximately 178 MiB.
Cause identified
The generated PPD contains:
*cupsManualCopies: True
*cupsFilter: "application/vnd.cups-postscript 100 foomatic-rip"
*cupsFilter: "application/vnd.cups-pdf 0 foomatic-rip"
CUPS expands multiple copies into separate pages before rendering.
Changing cupsManualCopies to False prevents this expansion, but the direct PDF-to-Foomatic path then produces only one physical copy when multiple copies are requested.
Working workaround
- Set
cupsManualCopies: False - Remove the direct
application/vnd.cups-pdffilter entry - Retain the PostScript-to-Foomatic filter
- Set the appropriate color-mode defaults
With this configuration, two copies are printed consecutively without processing delays, at 1200 × 1200 dpi in color.
Observed test results
- Original configuration, 2 copies: PDF-to-PostScript output contains 2 pages, approximately 119 MiB
- Modified PPD, 2 copies: PDF-to-PostScript output contains 1 page with
%RBINumCopies: 2, approximately 60 MiB - Final PCL XL output: approximately 178 MiB, rendered once
- Physical printer test: 2 copies printed without processing delay
Request
Please investigate whether the generic pxlcolor PPD could support hardware copy generation where available, and whether copy-count propagation in the direct PDF-to-Foomatic filter path can be corrected.
AI assistance disclosure
This issue was investigated with the assistance of ChatGPT.
I encountered the problem on my own printer and personally executed all diagnostic commands, printing tests, and configuration changes. All reported measurements and printing results were obtained from my actual system.
ChatGPT assisted with troubleshooting, interpreting the results, developing the workaround, and preparing this report.
The workaround has been verified on my OKI C532dn, but has not been tested on other printer models.
- Lenguaje dominante
- HTML
- Estrellas
- 14
- Forks
- 26
- Métricas de merge de PR
- Sin PR fusionados en 30 d
Preparar el entorno
Este proyecto no incluye contenedor de desarrollo, Dockerfile ni guía de contribución, así que la configuración corre por tu cuenta: empieza por su README y consulta nuestra guía para la primera contribución para los pasos generales.
Primeros pasos
- Lee el issue completo y luego la guía de contribución del proyecto.
- Comenta en el issue que vas a ocuparte — evita que dos personas hagan lo mismo.
- Haz un fork del repositorio y trabaja en una rama.
- Abre un pull request que haga referencia al número del issue.
Más de OpenPrinting/foomatic-db
-
Dificultad 4/5 3-5 días Aptitud para principiantes 42/100
OpenPrinting/foomatic-db#64 ·
-
Dificultad 4/5 3-5 días Aptitud para principiantes 38/100
OpenPrinting/foomatic-db#52 · 5 comentarios ·
-
foo2hp link doesn't workQuizá libre de nuevo @tillkamppeter la tomó hace 646 días y no hay ningún pull request abierto. Abierto
OpenPrinting/foomatic-db#49 · 3 comentarios · 1 asignado ·
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 45/100
OpenPrinting/foomatic-db#42 ·
-
Dificultad 5/5 Más de una semana Aptitud para principiantes 25/100
OpenPrinting/foomatic-db#37 ·
Todos los issues de OpenPrinting/foomatic-db
Issues similares
-
due_at is one hour late on the autumn DST change day (real-time delta added to a zoneinfo datetime)Abierto
Dificultad 2/5 1-3 horas Aptitud para principiantes 74/100
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 65/100
openwebwork/webwork2#3295 ·
Los mantenedores suelen responder en 4 días
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 77/100
open-feature/python-sdk-contrib#482 ·
Los mantenedores suelen responder en 1 día
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 75/100
Trust-Analysis/Tokenized-Fractional-#1090 ·
Los mantenedores suelen responder en 2 días
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 78/100
LadybirdBrowser/ladybird#15164 ·
Los mantenedores suelen responder en 1 día