[question/help] raw ola uart

オープン
#1,964 コメント 4 件 リアクション 0 件 担当者 0 名 GitHub で見る

まだ誰も着手していません。

評価

難易度
5/5
見積もり時間
1週間以上
初心者へのやさしさ
15/100
issue の種類
バグ
明瞭さ
説明が足りない
活発さ
停滞
技術スタック
raspberry-pi
領域
embedded-iot

調査の方向性

This is a support question without a defined code change. Start by reviewing the attached log.txt and ola-uart configuration alongside the UART plugin setup described in the issue. A useful outcome would be identifying whether the failure is in OLA configuration, GPIO/UART behavior, or the physical DMX connection, and documenting a reproducible fix if it is software-related.

索引モデルが issue の本文から書いたものです。

説明

Component-Plugin question

Hi, sorry for this (probably) stupid question. i have a raspberry pi 5 and i need to use it's gpio to control 6 channels of normal dmx512.

I enabled the uart plugin and connected wires to some pins on the piI don't know what's wrong, but when i use the ola ui to turn up the channels the lights don't change.

I connected uart tx on the pi to pin 3 on the dmx cable. i connected ground on the pi to pin 1 on the dmx cable. I don't have any breakout board but as far as i know i don't need one.

Attached is an -l 4 log and copy of ola-uart config.
log.txt

If anyone knows what i messed up, that would be great.

主要言語
C++
スター
771
フォーク
234
PR マージ指標
30日以内にマージされた PR はありません

環境構築

はじめの一歩

  1. issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
  2. 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
  3. リポジトリをフォークし、ブランチを切って変更します。
  4. issue 番号を参照したプルリクエストを送ります。

OpenLightingProject/ola のほかの issue

OpenLightingProject/ola の issue をすべて見る

似ている issue

C++ の issue をもっと見る

新しい issue をメールで受け取る

初心者向けの GitHub issue を短くまとめたダイジェスト。