[question/help] raw ola uart
Nadie ha tomado este issue todavía.
Evaluación
- Dificultad
- 5/5
- Tiempo estimado
- Más de una semana
- Aptitud para principiantes
- 15/100
- Tipo de issue
- Error
- Claridad
- Necesita aclaración
- Estado de actividad
- Estancado
- Stack tecnológico
- raspberry-pi
- Área
- embedded-iot
Línea de trabajo
This is a support question without a defined code change. Start by reviewing the attached log.txt and ola-uart configuration alongside the UART plugin setup described in the issue. A useful outcome would be identifying whether the failure is in OLA configuration, GPIO/UART behavior, or the physical DMX connection, and documenting a reproducible fix if it is software-related.
Escrito por el modelo de indexación a partir del texto del issue.
Descripción
Hi, sorry for this (probably) stupid question. i have a raspberry pi 5 and i need to use it's gpio to control 6 channels of normal dmx512.
I enabled the uart plugin and connected wires to some pins on the piI don't know what's wrong, but when i use the ola ui to turn up the channels the lights don't change.
I connected uart tx on the pi to pin 3 on the dmx cable. i connected ground on the pi to pin 1 on the dmx cable. I don't have any breakout board but as far as i know i don't need one.
Attached is an -l 4 log and copy of ola-uart config.
log.txt
If anyone knows what i messed up, that would be great.
- Lenguaje dominante
- C++
- Estrellas
- 771
- Forks
- 234
- Métricas de merge de PR
- Sin PR fusionados en 30 d
Preparar el entorno
- Sin Dockerfile ni archivo de Docker Compose
- Sin plantilla de pull request
- Leer la guía de contribución
Primeros pasos
- Lee el issue completo y luego la guía de contribución del proyecto.
- Comenta en el issue que vas a ocuparte — evita que dos personas hagan lo mismo.
- Haz un fork del repositorio y trabaja en una rama.
- Abre un pull request que haga referencia al número del issue.
Más de OpenLightingProject/ola
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 70/100
OpenLightingProject/ola#2075 ·
-
Digital Enlightenment / FX5 not recognizedPosiblemente ocupada Un pull request vinculado a esta issue está abierto o ya se fusionó. Abiertoquestion Type-DeviceSupport
Dificultad 4/5 3-5 días Aptitud para principiantes 35/100
OpenLightingProject/ola#2056 · 2 comentarios ·
-
Dificultad 3/5 1-2 días Aptitud para principiantes 55/100
OpenLightingProject/ola#2055 ·
-
Difficulty-Medium Language-C++ Maintainability OpSys-All
Dificultad 4/5 3-5 días Aptitud para principiantes 45/100
OpenLightingProject/ola#2053 · 1 comentario ·
-
v0.11.0Quizá libre de nuevo @peternewman la tomó hace 227 días y no hay ningún pull request abierto. Abierto
OpenLightingProject/ola#2038 · 18 comentarios · 2 asignados ·
Todos los issues de OpenLightingProject/ola
Issues similares
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 76/100
deepseek-ai/DeepEP#830 ·
Los mantenedores suelen responder en 1 día
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 66/100
google-ai-edge/LiteRT-LM#4701 ·
Los mantenedores suelen responder en 1 día
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 82/100
HarperFast/rocksdb-js#1131 ·
Los mantenedores suelen responder en 1 día
-
Swapped cache lookups in ScanModelAndDecideAllDiffExpansionPosiblemente ocupada @Lian292213 la tomó hoy. Abierto
Dificultad 2/5 1-3 horas Aptitud para principiantes 68/100
Los mantenedores suelen responder en 1 día
-
area/daemon bug good first issue platform/linux priority/p2
Dificultad 2/5 1-3 horas Aptitud para principiantes 72/100
ToshiNamura/Deimos#5 ·