restart the app: 'reconnect with pre-shared token: agent not reachable within 20s' in about 1 of 25 restarts, on fixture builds by both Flutter 3.44.8 and 3.50.0
メンテナーはふだん 1 日以内に返信
まだ誰も着手していません。
評価
- 難易度
- 3/5
- 見積もり時間
- 1〜2日
- 初心者へのやさしさ
- 68/100
調査の方向性
Start with the reconnect loop in internal/runner/device_context.go, then trace how agent.token_read_timeout controls its deadline. First measure time from app relaunch to the first successful dial on idle and loaded machines, as the issue suggests. Done means identifying why reconnects exceed the 20-second timeout and adding a focused regression test for the failure.
索引モデルが issue の本文から書いたものです。
説明
What happens
In a suite that has before each test / restart the app, the restart sometimes fails before the test starts:
before each: line N: restart the app: restart the app: reconnect with pre-shared token: agent not reachable within 20s
The test never runs; the other tests of the same run pass. It is a failed reconnect after the app was force-stopped and relaunched, not an assertion. It showed up while running the new widget-family suites on one Android emulator, on builds of the fixture by both Flutter 3.44.8 and 3.50.0.
Measurements (everything I kept; not a controlled experiment)
Setup: the Flutter fixture app of this repository (native-test-apps/flutter, --dart-define=PROBE_AGENT=true --dart-define=PROBE_FIXTURE_WIDGETS=<family>), one emulator (Android 15, API 35, emulator-5600), the CLI and agent built from main of the day (the agent is a path dependency). Suites of 10 to 12 tests, each test starting with restart the app and a wait until #<id> appears.
probe.yaml of the runs (the same in all of them): project.app: com.alphawavesystems.probe_flutter_fixture, agent.port: 48690, agent.device_port: 48686, agent.dial_timeout: 30s, agent.token_read_timeout: 20s. No defaults.retry_failed_tests, no --retry: nothing re-ran a test. probe test <file> --device <serial> -y.
| Flutter build | runs kept | runs with at least one restart failure | tests run | restart failures |
|---|---|---|---|---|
| 3.44.8 (suites) | 15 | 9 | 178 | 9 |
| 3.44.8 (negative files and small diagnostic files) | 15 | 5 | 124 | 5 |
| 3.50.0 (suites and negative files), first 9 runs | 9 | 0 | 101 | 0 |
| 3.50.0, 4 more runs made later (2 suites, 2 negative files) | 4 | 3 | 42 | 4 |
Added after the first version of this issue: the 4 later 3.44.8 runs (2 suites, 2 negative files, 42 tests) had 2 more failures, so on 3.44.8 16 of about 344 restarts failed (about 5%). On 3.50.0, 4 of about 143 failed (about 3%): the first 9 runs had none, the 4 later ones 4 (one run had 2 failures). So this is not specific to one Flutter version; my first reading (3.44.8 only) came from the 3.50.0 runs happening to be the quiet ones. Apart from that run, each run had at most one failure; the failing test was a different one each time (first test, middle test, last test), and it did not follow a test that left a dialog or a snack bar open (it also happened after plain tests).
What I do not know
- Machine load was not measured. Other sessions were building and testing on the same Mac, and the 3.44.8 runs were mostly made later in the day than the 3.50.0 ones, so the Flutter version and the load are confounded. Another developer measured the same failure on
mainbefore my runs: 3 of 10 runs with a heavy test run in parallel and 0 of 10 when the machine was idle. I did not repeat that. - Whether the app comes up late (a slow cold start after
am force-stop), or the agent port is bound late, or the dial loop gives up too early: the error only says that the agent was not reachable withintoken_read_timeout(20 s). - Whether it happens on iOS.
Where to look
internal/runner/device_context.go (the reconnect after a restart: a plain dial loop that fails when the app does not come up within agent.token_read_timeout). A first measurement would be to log the time from the relaunch to the first successful dial in a run that fails and in a run that does not, on an idle machine and on a loaded one, for both Flutter builds.
Not this
- #793 (steps right after a restart, the screen still being built) is a different problem: here the reconnect itself fails.
- The 0x0 / first-frame problem fixed in #803 is not this either, according to the developer who measured it (a failed WebSocket dial).
- 主要言語
- Go
- スター
- 6
- フォーク
- 3
- 平均マージ
- 6時間 28分
- マージ済み PR(30日)
- 362
環境構築
- Dockerfile・Docker Compose ファイルなし
- プルリクエストのテンプレートあり
- コントリビューションガイドを読む
はじめの一歩
- issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
- 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
- リポジトリをフォークし、ブランチを切って変更します。
- issue 番号を参照したプルリクエストを送ります。
AlphaWaveSystems/flutter-probe のほかの issue
-
agent: is checked on a wrapper holding several checkables answers from the first one in tree orderオープンbug
難易度 2/5 1〜3時間 初心者へのやさしさ 76/100
AlphaWaveSystems/flutter-probe#865 ·
メンテナーはふだん 1 日以内に返信
-
area/cli bug
難易度 2/5 1〜3時間 初心者へのやさしさ 73/100
AlphaWaveSystems/flutter-probe#424 ·
メンテナーはふだん 1 日以内に返信
-
area/docs documentation
難易度 2/5 1〜3時間 初心者へのやさしさ 70/100
AlphaWaveSystems/flutter-probe#409 ·
メンテナーはふだん 1 日以内に返信
-
Dial timeout error should say how long it waited and name the timeout setting対応中かも @jay23606 が 2 日前に担当しました。 オープンarea/cli bug
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
AlphaWaveSystems/flutter-probe#408 ·
メンテナーはふだん 1 日以内に返信
-
難易度 4/5 3〜5日 初心者へのやさしさ 45/100
AlphaWaveSystems/flutter-probe#888 ·
メンテナーはふだん 1 日以内に返信
AlphaWaveSystems/flutter-probe の issue をすべて見る
似ている issue
-
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
IBM-Cloud/terraform-provider-ibm#7115 ·
メンテナーはふだん 2 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 86/100
fluxcd/notification-controller#1441 ·
メンテナーはふだん 1 日以内に返信
-
bug
難易度 2/5 1〜3時間 初心者へのやさしさ 66/100
volcengine/volcengine-go-sdk#163 · コメント 1 件 ·
-
難易度 2/5 1〜3時間 初心者へのやさしさ 76/100
OneBusAway/maglev#2145 ·
メンテナーはふだん 2 日以内に返信
-
priority/medium status/ready type/chore
難易度 2/5 1〜3時間 初心者へのやさしさ 84/100
discobox-ai/discobox#1357 ·
メンテナーはふだん 1 日以内に返信