Hacktoberfest 2026: le issue che i maintainer hanno segnato per ottobre, aperte e adatte ai principianti. Sfoglia le issue Hacktoberfest

Bluetooth headset mic: crash ("Failed to create tap due to format mismatch") or endless restart loop when starting mic tracking

Aperta
  • Qualcosa non va?
#129 0 commenti 0 reazioni 0 assegnatari Vedi su GitHub

Nessuno ha ancora preso questa issue.

Valutazione

Difficoltà
4/5
Tempo stimato
3-5 giorni
Idoneità per principianti
42/100
Tipo di issue
Bug
Chiarezza
Specificata chiaramente
Stato di attività
Attiva
Stack tecnologico
macos, swift
Ambito
audio-video-rtc, desktop

Direzione di ricerca

Start in SpeechRecognizer.beginRecognition() and trace the audio-engine configuration-change observer through restartRecognition() and cleanupRecognition(). Reproduce with a Bluetooth headset switching from A2DP to HFP, then verify startup no longer crashes or restarts continuously and that repeated configuration changes are bounded. The issue also identifies the microphone picker’s saved-device UID as a related behavior to check.

Scritto dal modello di indicizzazione a partire dal testo della issue.

Descrizione

Summary

When the microphone is a Bluetooth headset (AirPods-style earbuds), starting mic-based practice either:

  1. crashes with an uncaught AVFAudio exception, or
  2. loops: the app stays up but tears down and restarts the audio engine continuously, about 50 CoreAudio errors per second.

Both come from the same trigger. Opening a Bluetooth mic makes macOS switch the headset from A2DP (stereo, 44.1/48 kHz, no mic) to HFP (16 kHz mono) while beginRecognition() is running.

Environment
  • Textream 1.7.1 (official notarized DMG, commit 2c02f3e)
  • macOS 27.2, Apple Silicon
  • Mic: Technics EAH-AZ100 (Bluetooth earbuds). Should reproduce with any Bluetooth headset that switches to HFP when its mic opens.
  • Listening mode: default (word tracking), practice from the main window
Steps to reproduce
  1. Connect Bluetooth earbuds while they're playing in A2DP mode.
  2. Either leave Textream's mic on the system default (earbuds as system input), or select the earbuds explicitly in Settings → Microphone.
  3. Start practice with the microphone.

Expected: mic tracking starts, perhaps after a short pause while the headset switches profile.
Actual: crash (explicit selection, below) or a continuous restart loop (system default, below).

1. Crash: uncaught exception from installTap
*** Terminating app due to uncaught exception 'com.apple.coreaudio.avfaudio',
reason: 'Failed to create tap due to format mismatch, <AVAudioFormat: 1 ch, 44100 Hz, Float32>'
  3  AVFAudio  AVAudioEngineGraph::InstallTapOnNode(...)
  4  AVFAudio  -[AVAudioNode installTapOnBus:bufferSize:format:error:block:]
  5  Textream  ...
  8  libdispatch _dispatch_call_block_and_release   (queued scheduleBeginRecognition work item)

In SpeechRecognizer.beginRecognition():

  • hardwareFormat = inputNode.outputFormat(forBus: 0) (line ~479) is read while the headset still reports its pre-switch 44.1 kHz format.
  • speechCaptureFormat(for:) builds a 1 ch / 44.1 kHz tap format from it.
  • By the time inputNode.installTap(onBus:bufferSize:format:) runs (line ~521), the device is in HFP at 16 kHz. AVFAudio raises an Objective-C exception, which Swift can't catch, so the process aborts.

With an explicit selection this is more likely. The code switches device via kAudioOutputUnitProperty_CurrentDevice + AudioUnitUninitialize/Initialize (lines ~406-424) and then reads the format straight away, before the HFP switch has settled.

2. Endless restart loop (system-default mic)

The unified log shows a steady stream of:

Textream (CoreAudio) throwing -10877            # ~593 times in 30 min, ~50/s while active
AUHAL UpdateStreamFormats ... 1 ch, 16000 Hz    # alternating with
AUHAL UpdateStreamFormats ... 2 ch, 44100 Hz

The cycle:

  1. beginRecognition() opens the mic, so the headset switches A2DP → HFP and AVAudioEngineConfigurationChange fires.
  2. The observer (line ~501-511) calls restartRecognition(), which runs cleanupRecognition(). That closes the mic, and the headset switches back to A2DP.
  3. scheduleBeginRecognition(after: 0.5) reopens the mic, the headset switches to HFP again, and the cycle repeats.

Two details keep it from ever stopping:

  • restartRecognition(resetRetryCount: true) is the default, and the observer uses it. So retryCount is reset to 0 on every config change, and maxRetries never caps the loop (lines ~637-639).
  • suppressConfigChange is only set on the explicit-mic-selection path (line ~409). With the system default, the HFP switch caused by our own mic open is treated as an external change.

There's also a minor related problem: Settings → Microphone logs Picker: the selection "<BT-address>:input" is invalid and does not have an associated tag for the saved Bluetooth mic UID. The picker can therefore show a different device from the one actually in use.

Suggested fixes
  • Make the tap install non-fatal:
    • read the format immediately before installTap and compare it with inputNode.inputFormat(forBus: 0); or
    • install the tap with format: nil (the node's current format) and downmix/resample in the tap with AVAudioConverter; or
    • wrap installTap in a small Objective-C @try/@catch shim and treat a mismatch like the existing invalid-format guard (retry after a settle delay).
  • Don't reset retryCount from the config-change observer. Call restartRecognition(resetRetryCount: false) there and add backoff, so a device that keeps flapping ends in failListening(...) instead of looping.
  • Treat the first config change after our own engine start as expected. Suppress or debounce config changes for roughly 1-2 s after audioEngine.start() on all paths, not only explicit mic selection, because opening a Bluetooth mic always triggers the profile switch.
  • Make sure the microphone picker includes the saved device UID, or falls back visibly to the system default.
Workaround (untested)

Keep the headset in HFP before starting Textream, so the format doesn't change during startup. For example, open QuickTime → New Audio Recording with the headset selected, without recording. Using the built-in mic or a wired/USB mic avoids the problem completely.

Happy to test a build. Thanks for Textream!

Lingua principale
Swift
Stelle
4k
Fork
271
Nessuna PR unita negli ultimi 30g

Preparare l'ambiente

Questo progetto non fornisce container di sviluppo, Dockerfile né guida per i contributori, quindi l'ambiente è a tuo carico: parti dal suo README e consulta la nostra guida al primo contributo per i passaggi generali.

Come iniziare

  1. Leggi tutta la issue e poi la guida ai contributi del progetto.
  2. Commenta sulla issue per dire che te ne occupi tu — evita che due persone facciano lo stesso lavoro.
  3. Fai un fork del repository e lavora su un branch.
  4. Apri una pull request che faccia riferimento al numero della issue.

Altre issue di f/textream

Tutte le issue di f/textream

Issue simili

Altre issue su Swift

Ricevi le nuove issue nella tua casella

Un breve riepilogo di issue GitHub adatte ai principianti.