Under Proton, mad() can be split into a multiply and an add, so wg_div / pd_div3 are 1 ULP off (upstream fix proposed)
Les mainteneurs répondent en général sous 1 jour
Personne n'a encore pris cette issue.
Évaluation
- Difficulté
- 4/5
- Temps estimé
- 3-5 jours
- Accessibilité débutants
- 15/100
- Type d'issue
- Bug
- Clarté
- Plutôt claire
- Activité
- Active
- Stack technique
- cpp
- Domaine
- computer-graphics
Piste de recherche
The payload names build_dx12.py, which strips precise marks from the division shaders, and clean/dx12/README.md, which documents the Windows driver's fused mad() behaviour. It also names native_helpers color_divide and native_direct_test check as the ULP measurements. The root cause and the proposed fix live upstream in dxil-spirv#365, so no change in this repository is clearly requested; confirm with the maintainer what, if anything, belongs here before starting.
Rédigé par le modèle d'indexation à partir du texte de l'issue.
Description
Under Proton, WrongGPU's exact arithmetic is not exact everywhere. The cause is in the D3D12-to-Vulkan translation, not in WrongGPU, and a fix is proposed upstream: HansKristian-Work/dxil-spirv#365. This issue records what we found, for reference.
What happens
dxil-spirv translates mad() (DXIL FMad) to a SPIR-V Fma. It marks the Fma NoContraction only when the FMad carries dx.precise. Without that mark, RADV's compiler (ACO) may split the Fma into a multiply and an add. In wg_div, mad(-bs, y, 1.0f) became s_mul_f32 + s_sub_f32, and the remainder steps became v_mul_f32 + v_sub_f32. AMD's Windows driver keeps every non-precise mad() fused (clean/dx12/README.md), and wg_div and pd_div3 depend on that.
Measured on an RX 9070 XT (RADV) under GE-Proton 11-11, with vkd3d-proton 5b1089c8 + dxil-spirv#362:
native_helperscolor_divideagainst IEEE division (NumPy): 44,010 of 1,802,240 results 1 ULP off (51 of 110 divisors).native_direct_test check: the direct and staged routes differ by 1 inpost.historyfrom frame 3 (reset frame, exposure mode 0, pre-exposure 1.375).
In game, a difference this size is not visible. It matters for bit-exact comparisons run under Proton.
Fixes
- Upstream, dxil-spirv#365: every FMad's
FmagetsNoContraction. With it,color_dividehas 0 wrong results and the two routes give the same bits on all 8 frames. A timing A/B of Model M's frame showed +0.18%, inside the noise. In Cyberpunk, RR's frame time did not change. It reaches players once a vkd3d-proton with it ships in Proton. - Interim, no rebuild: vkd3d-proton's shader quirk. Create a text file with this line:
Then start the game with0000000000000000-ffffffffffffffff FORCE_NOCONTRACT_MATHVKD3D_SHADER_QUIRKS=<path to that file> %command%.color_dividethen also has 0 wrong results; Model M's frame A/B was +0.52%, inside the noise. Note that this applies to every shader in the game, not only WrongGPU's. I have not measured what it costs the game's own rendering.
Not a fix: precise
Marking the divisions' mad() calls precise would give dxil-spirv the dx.precise mark it needs. But build_dx12.py removes these marks on purpose, because AMD's Windows driver splits a precise mad(). Keeping them would trade the Proton problem for the same problem on Windows, so the fix belongs in the translation layer.
🤖 Generated with Claude Code
- Langage dominant
- C++
- Étoiles
- 12
- Forks
- 2
- Merge moyen
- 3 h 10 min
- PR mergées (30 j)
- 171
Préparer son environnement
- Aucun Dockerfile ni fichier Docker Compose
- Propose un modèle de pull request
- Lire le guide de contribution
Par où commencer
- Lisez l'issue en entier, puis le guide de contribution du projet.
- Signalez en commentaire que vous la prenez — cela évite que deux personnes fassent le même travail.
- Forkez le dépôt et travaillez sur une branche.
- Ouvrez une pull request qui référence le numéro de l'issue.
Autres issues de phantoslayer21/wronggpu
-
Difficulté 2/5 1-3 heures Accessibilité débutants 88/100
phantoslayer21/wronggpu#275 ·
Les mainteneurs répondent en général sous 1 jour
-
Difficulté 2/5 1-3 heures Accessibilité débutants 82/100
phantoslayer21/wronggpu#274 ·
Les mainteneurs répondent en général sous 1 jour
-
bug
Difficulté 2/5 1-3 heures Accessibilité débutants 88/100
phantoslayer21/wronggpu#241 ·
Les mainteneurs répondent en général sous 1 jour
-
bug build
Difficulté 2/5 1-3 heures Accessibilité débutants 74/100
phantoslayer21/wronggpu#234 ·
Les mainteneurs répondent en général sous 1 jour
-
Launcher tests: "an older record: update available" fakes a version newer than the test buildOuvertebug build
Difficulté 2/5 1-3 heures Accessibilité débutants 80/100
phantoslayer21/wronggpu#233 ·
Les mainteneurs répondent en général sous 1 jour
Toutes les issues de phantoslayer21/wronggpu
Issues similaires
-
ai_p2
Difficulté 2/5 1-3 heures Accessibilité débutants 80/100
ClickHouse/ClickHouse#132519 ·
Les mainteneurs répondent en général sous 1 jour
-
[Bug]: VST3 getMidiControllerAssignment reads past midiControllerToParameter for program changeOuverte
Difficulté 2/5 1-3 heures Accessibilité débutants 76/100
juce-framework/JUCE#1810 ·
-
Difficulté 1/5 Moins d'une heure Accessibilité débutants 82/100
petercorke/robotics-toolbox-python#952 ·
Les mainteneurs répondent en général sous 1 jour
-
NatronRenderer: a Python error in the script (-t / project script) doesn't change the exit statusOuvertefunc:engine type:bug
Difficulté 2/5 1-3 heures Accessibilité débutants 72/100
NatronGitHub/Natron#1276 ·
Les mainteneurs répondent en général sous 1 jour
-
Difficulté 1/5 1-3 heures Accessibilité débutants 77/100
Les mainteneurs répondent en général sous 1 jour