Lock code

L’issue contient un sketch de style Arduino, mais ne nomme ni fichier du dépôt, ni point d’entrée, ni comportement défaillant, ni modification demandée. Commencez par déterminer si ce code appartient au dépôt training-kit et quel comportement de verrouillage est attendu. Aucun critère d’achèvement ni test n’est fourni ; l’issue doit donc être clarifiée avant de pouvoir considérer le travail comme terminé.

#include <SoftwareSerial.h>
SoftwareSerial bt(0,2);
String inputs;

bool sw =1;
int s1=0;
int ss = 20;
#include <EEPROM.h>
#define Lock 4
#define relay1 5
#define relay2 6
#define relay3 7
#define relay4 8
#define relay5 9
#define relay6 10
#define relay7 11
#define relay8 12
#define dipar 13

long re1 = 0, re2 = 0, re3 = 0, re4 = 0, re5 = 0, re6 = 0,
re7 = 0, re8 = 0;
void setup() {
Serial.begin(9600);
bt.begin(9600);
pinMode(Lock, OUTPUT);
pinMode(dipar, OUTPUT);

pinMode(relay1, OUTPUT);
pinMode(relay2, OUTPUT);
pinMode(relay3, OUTPUT);
pinMode(relay4, OUTPUT);
pinMode(relay5, OUTPUT);
pinMode(relay6, OUTPUT);
pinMode(relay7, OUTPUT);
pinMode(relay8, OUTPUT);
re1 = EEPROM.read(1);
re2 = EEPROM.read(2);
re3 = EEPROM.read(2);
re4 = EEPROM.read(4);
re5 = EEPROM.read(5);
re6 = EEPROM.read(6);
re7 = EEPROM.read(7);
re8 = EEPROM.read(8);
digitalWrite(relay1, re1);
digitalWrite(relay2, re2);
digitalWrite(relay3, re3);
digitalWrite(relay4, re4);
digitalWrite(relay5, re5);
digitalWrite(relay6, re6);
digitalWrite(relay7, re7);
digitalWrite(relay8, re8);
}
void loop() {

if (sw== 1) {

if (ss>0) {ss = ss - 1;
  delay(500);
  
  Serial.println(ss);
  bt.println(ss);
  bt.println(";");
  delay(100);
  digitalWrite(dipar, HIGH);

if (ss == 0) {
 digitalWrite(dipar, LOW);
 ss=0;
 s1=0;
  while (Serial.available()==0) {}
}
}

}

if (s1==0) {

s1 = Serial.parseInt();

for (int l = 1; l <= s1; l += 1) {

delay(500);

  digitalWrite(Lock, HIGH);
  delay(500);
  digitalWrite(Lock, LOW);
  delay(500);

  if (s1==1) {
    ss = 20;
  }
  Serial.println(l);
}

}

while (Serial.available())

{

delay(10);
char c = Serial.read();



inputs += c;
if (inputs.length() > 0) {
  
ss=20;  


  Serial.println(inputs);

  if (inputs == "A") {

    digitalWrite(relay1, HIGH);
    EEPROM.write(1, 1);
  } else if (inputs == "B")

  {

    digitalWrite(relay2, HIGH);
    EEPROM.write(2, 1);

  } else if (inputs == "C") {

    digitalWrite(relay3, HIGH);
    EEPROM.write(3, 1);
  }

  else if (inputs == "D") {

    digitalWrite(relay4, HIGH);
    EEPROM.write(4, 1);
  }

  else if (inputs == "E") {

    digitalWrite(relay5, HIGH);
    EEPROM.write(5, 1);
  }

  else if (inputs == "F") {
    re6 = ~re6;
    digitalWrite(relay6, HIGH);
    EEPROM.write(6, 1);
  }

  else if (inputs == "G") {

    digitalWrite(relay7, HIGH);
    EEPROM.write(7, 1);
  }

  else if (inputs == "H") {

    digitalWrite(relay8, HIGH);
    EEPROM.write(8, 1);
  } else if (inputs == "a") {

    digitalWrite(relay1, LOW);
    EEPROM.write(1, 0);
  } else if (inputs == "b")

  {

    digitalWrite(relay2, LOW);
    EEPROM.write(2, 0);

  } else if (inputs == "c") {

    digitalWrite(relay3, LOW);
    EEPROM.write(3, 0);
  }

  else if (inputs == "d") {

    digitalWrite(relay4, LOW);
    EEPROM.write(4, 0);
  }

  else if (inputs == "e") {

    digitalWrite(relay5, LOW);
    EEPROM.write(5, 0);
  }

  else if (inputs == "f") {
    re6 = ~re6;
    digitalWrite(relay6, LOW);
    EEPROM.write(6, 0);
  }

  else if (inputs == "g") {

    digitalWrite(relay7, LOW);
    EEPROM.write(7, 0);
  }

  else if (inputs == "h") {

    digitalWrite(relay8, LOW);
    EEPROM.write(8, 0);
  }

  else if (inputs == "W") {
    digitalWrite(relay1, 1);
    EEPROM.write(1, 1);

    digitalWrite(relay2, 1);
    EEPROM.write(2, 1);

    digitalWrite(relay3, 1);
    EEPROM.write(3, 1);

    digitalWrite(relay4, 1);
    EEPROM.write(4, 1);

    digitalWrite(relay5, 1);
    EEPROM.write(5, 1);

    digitalWrite(relay6, 1);
    EEPROM.write(6, 1);

    digitalWrite(relay7, 1);
    EEPROM.write(7, 1);

    digitalWrite(relay8, 1);
    EEPROM.write(8, 1);

  }

  else if (inputs == "w") {

    digitalWrite(relay1, 0);
    EEPROM.write(1, 0);

    digitalWrite(relay2, 0);
    EEPROM.write(2, 0);

    digitalWrite(relay3, 0);
    EEPROM.write(3, 0);

    digitalWrite(relay4, 0);
    EEPROM.write(4, 0);

    digitalWrite(relay5, 0);
    EEPROM.write(5, 0);

    digitalWrite(relay6, 0);
    EEPROM.write(6, 0);

    digitalWrite(relay7, 0);
    EEPROM.write(7, 0);

    digitalWrite(relay8, 0);
    EEPROM.write(8, 0);
  }

  for (int l = 1; l <= 3; l++) {
    digitalWrite(dipar, HIGH);
    delay(100);
    digitalWrite(dipar, LOW);
    delay(100);
    inputs = "";
  }
}

}
}