Lock code

El issue contiene un sketch de estilo Arduino, pero no indica ningún archivo del repositorio, punto de entrada, comportamiento erróneo ni cambio solicitado. Empieza por determinar si este código pertenece al repositorio training-kit y cuál es el comportamiento de bloqueo previsto. No se proporcionan criterios de finalización ni pruebas, por lo que es necesario aclarar el issue antes de que se pueda considerar terminado el trabajo.

#include <SoftwareSerial.h>
SoftwareSerial bt(0,2);
String inputs;

bool sw =1;
int s1=0;
int ss = 20;
#include <EEPROM.h>
#define Lock 4
#define relay1 5
#define relay2 6
#define relay3 7
#define relay4 8
#define relay5 9
#define relay6 10
#define relay7 11
#define relay8 12
#define dipar 13

long re1 = 0, re2 = 0, re3 = 0, re4 = 0, re5 = 0, re6 = 0,
re7 = 0, re8 = 0;
void setup() {
Serial.begin(9600);
bt.begin(9600);
pinMode(Lock, OUTPUT);
pinMode(dipar, OUTPUT);

pinMode(relay1, OUTPUT);
pinMode(relay2, OUTPUT);
pinMode(relay3, OUTPUT);
pinMode(relay4, OUTPUT);
pinMode(relay5, OUTPUT);
pinMode(relay6, OUTPUT);
pinMode(relay7, OUTPUT);
pinMode(relay8, OUTPUT);
re1 = EEPROM.read(1);
re2 = EEPROM.read(2);
re3 = EEPROM.read(2);
re4 = EEPROM.read(4);
re5 = EEPROM.read(5);
re6 = EEPROM.read(6);
re7 = EEPROM.read(7);
re8 = EEPROM.read(8);
digitalWrite(relay1, re1);
digitalWrite(relay2, re2);
digitalWrite(relay3, re3);
digitalWrite(relay4, re4);
digitalWrite(relay5, re5);
digitalWrite(relay6, re6);
digitalWrite(relay7, re7);
digitalWrite(relay8, re8);
}
void loop() {

if (sw== 1) {

if (ss>0) {ss = ss - 1;
  delay(500);
  
  Serial.println(ss);
  bt.println(ss);
  bt.println(";");
  delay(100);
  digitalWrite(dipar, HIGH);

if (ss == 0) {
 digitalWrite(dipar, LOW);
 ss=0;
 s1=0;
  while (Serial.available()==0) {}
}
}

}

if (s1==0) {

s1 = Serial.parseInt();

for (int l = 1; l <= s1; l += 1) {

delay(500);

  digitalWrite(Lock, HIGH);
  delay(500);
  digitalWrite(Lock, LOW);
  delay(500);

  if (s1==1) {
    ss = 20;
  }
  Serial.println(l);
}

}

while (Serial.available())

{

delay(10);
char c = Serial.read();



inputs += c;
if (inputs.length() > 0) {
  
ss=20;  


  Serial.println(inputs);

  if (inputs == "A") {

    digitalWrite(relay1, HIGH);
    EEPROM.write(1, 1);
  } else if (inputs == "B")

  {

    digitalWrite(relay2, HIGH);
    EEPROM.write(2, 1);

  } else if (inputs == "C") {

    digitalWrite(relay3, HIGH);
    EEPROM.write(3, 1);
  }

  else if (inputs == "D") {

    digitalWrite(relay4, HIGH);
    EEPROM.write(4, 1);
  }

  else if (inputs == "E") {

    digitalWrite(relay5, HIGH);
    EEPROM.write(5, 1);
  }

  else if (inputs == "F") {
    re6 = ~re6;
    digitalWrite(relay6, HIGH);
    EEPROM.write(6, 1);
  }

  else if (inputs == "G") {

    digitalWrite(relay7, HIGH);
    EEPROM.write(7, 1);
  }

  else if (inputs == "H") {

    digitalWrite(relay8, HIGH);
    EEPROM.write(8, 1);
  } else if (inputs == "a") {

    digitalWrite(relay1, LOW);
    EEPROM.write(1, 0);
  } else if (inputs == "b")

  {

    digitalWrite(relay2, LOW);
    EEPROM.write(2, 0);

  } else if (inputs == "c") {

    digitalWrite(relay3, LOW);
    EEPROM.write(3, 0);
  }

  else if (inputs == "d") {

    digitalWrite(relay4, LOW);
    EEPROM.write(4, 0);
  }

  else if (inputs == "e") {

    digitalWrite(relay5, LOW);
    EEPROM.write(5, 0);
  }

  else if (inputs == "f") {
    re6 = ~re6;
    digitalWrite(relay6, LOW);
    EEPROM.write(6, 0);
  }

  else if (inputs == "g") {

    digitalWrite(relay7, LOW);
    EEPROM.write(7, 0);
  }

  else if (inputs == "h") {

    digitalWrite(relay8, LOW);
    EEPROM.write(8, 0);
  }

  else if (inputs == "W") {
    digitalWrite(relay1, 1);
    EEPROM.write(1, 1);

    digitalWrite(relay2, 1);
    EEPROM.write(2, 1);

    digitalWrite(relay3, 1);
    EEPROM.write(3, 1);

    digitalWrite(relay4, 1);
    EEPROM.write(4, 1);

    digitalWrite(relay5, 1);
    EEPROM.write(5, 1);

    digitalWrite(relay6, 1);
    EEPROM.write(6, 1);

    digitalWrite(relay7, 1);
    EEPROM.write(7, 1);

    digitalWrite(relay8, 1);
    EEPROM.write(8, 1);

  }

  else if (inputs == "w") {

    digitalWrite(relay1, 0);
    EEPROM.write(1, 0);

    digitalWrite(relay2, 0);
    EEPROM.write(2, 0);

    digitalWrite(relay3, 0);
    EEPROM.write(3, 0);

    digitalWrite(relay4, 0);
    EEPROM.write(4, 0);

    digitalWrite(relay5, 0);
    EEPROM.write(5, 0);

    digitalWrite(relay6, 0);
    EEPROM.write(6, 0);

    digitalWrite(relay7, 0);
    EEPROM.write(7, 0);

    digitalWrite(relay8, 0);
    EEPROM.write(8, 0);
  }

  for (int l = 1; l <= 3; l++) {
    digitalWrite(dipar, HIGH);
    delay(100);
    digitalWrite(dipar, LOW);
    delay(100);
    inputs = "";
  }
}

}
}