Print serial port path/name in output of ola_dev_info

Ouverte
#2,002 0 commentaires 0 réactions 0 personnes assignées Voir sur GitHub

Personne n'a encore pris cette issue.

Évaluation

Difficulté
3/5
Temps estimé
1-2 jours
Accessibilité débutants
52/100
Type d'issue
Fonctionnalité
Clarté
Plutôt claire
Activité
À l'abandon
Stack technique
cpp
Domaine
cli

Piste de recherche

Start with the ola_dev_info command and the device-info output it produces, then trace how serial device details are obtained. Check the libserialport sp_get_port_name(port) API referenced in the issue and test with an ENTTEC device; done means the output includes its path or name, such as /dev/ttyUSB0 or COMx.

Rédigé par le modèle d'indexation à partir du texte de l'issue.

Description

In response to comment in https://github.com/OpenLightingProject/ola/issues/2000 :

Btw, is it possible to somehow get the corresponding device path of ENTTEC (for me, /det/ttyUSB0) from OLA? I know ola_dev_info output something like "Device 2: Enttec Usb Pro Device .... port 0, OUT, patched to universe 1, RDM supported", but there is no /dev/ttyUSB0 device path there (I have to look for startup messages in syslog like "olad: plugins/usbpro/WidgetDetectorThread.cpp:215: Found potential USB Serial device at /dev/ttyUSB0" to find the device path).

Not if you can't currently see it on ola_dev_info, and if you could it would probably still be down to parsing a string that might change. Do you want to open a new issue for this as maybe we should extend our device info stuff to have some sort of path (be that on the device or as an IP) as a specific separate piece of info:

It would be great if the OLA device info could be expanded to also print this information.

In support of this, I'd like to note that I've used the https://sigrok.org/gitweb/?p=libserialport.git;a=tree in an executable, and the command sp_get_port_name(port) returns /dev/ttyUSB0 on Raspberry Pi, and COMx on Windows.

Langage dominant
C++
Étoiles
773
Forks
233
Métriques de merge des PR
Aucune PR mergée en 30 j

Préparer son environnement

Par où commencer

  1. Lisez l'issue en entier, puis le guide de contribution du projet.
  2. Signalez en commentaire que vous la prenez — cela évite que deux personnes fassent le même travail.
  3. Forkez le dépôt et travaillez sur une branche.
  4. Ouvrez une pull request qui référence le numéro de l'issue.

Autres issues de OpenLightingProject/ola

Toutes les issues de OpenLightingProject/ola

Issues similaires

Plus d'issues C++

Recevez les nouvelles issues par e-mail

Un résumé court des issues GitHub adaptées aux débutants.