Print serial port path/name in output of ola_dev_info

Abierto
#2,002 0 comentarios 0 reacciones 0 asignados Ver en GitHub

Nadie ha tomado este issue todavía.

Evaluación

Dificultad
3/5
Tiempo estimado
1-2 días
Aptitud para principiantes
52/100
Tipo de issue
Nueva funcionalidad
Claridad
Bastante claro
Estado de actividad
Estancado
Stack tecnológico
cpp
Área
cli

Línea de trabajo

Start with the ola_dev_info command and the device-info output it produces, then trace how serial device details are obtained. Check the libserialport sp_get_port_name(port) API referenced in the issue and test with an ENTTEC device; done means the output includes its path or name, such as /dev/ttyUSB0 or COMx.

Escrito por el modelo de indexación a partir del texto del issue.

Descripción

In response to comment in https://github.com/OpenLightingProject/ola/issues/2000 :

Btw, is it possible to somehow get the corresponding device path of ENTTEC (for me, /det/ttyUSB0) from OLA? I know ola_dev_info output something like "Device 2: Enttec Usb Pro Device .... port 0, OUT, patched to universe 1, RDM supported", but there is no /dev/ttyUSB0 device path there (I have to look for startup messages in syslog like "olad: plugins/usbpro/WidgetDetectorThread.cpp:215: Found potential USB Serial device at /dev/ttyUSB0" to find the device path).

Not if you can't currently see it on ola_dev_info, and if you could it would probably still be down to parsing a string that might change. Do you want to open a new issue for this as maybe we should extend our device info stuff to have some sort of path (be that on the device or as an IP) as a specific separate piece of info:

It would be great if the OLA device info could be expanded to also print this information.

In support of this, I'd like to note that I've used the https://sigrok.org/gitweb/?p=libserialport.git;a=tree in an executable, and the command sp_get_port_name(port) returns /dev/ttyUSB0 on Raspberry Pi, and COMx on Windows.

Lenguaje dominante
C++
Estrellas
771
Forks
234
Métricas de merge de PR
Sin PR fusionados en 30 d

Preparar el entorno

Primeros pasos

  1. Lee el issue completo y luego la guía de contribución del proyecto.
  2. Comenta en el issue que vas a ocuparte — evita que dos personas hagan lo mismo.
  3. Haz un fork del repositorio y trabaja en una rama.
  4. Abre un pull request que haga referencia al número del issue.

Más de OpenLightingProject/ola

Todos los issues de OpenLightingProject/ola

Issues similares

Más issues de C++

Recibe los nuevos issues en tu correo

Un resumen breve de issues de GitHub para principiantes.