Steam Frame: Full-speed USB device fails on Frame rear port (-71 at SET_CONFIGURATION), works through USB 2.0 hub

Abierto

#2,846 abierto el 27/9/2026 0 comentarios 0 reacciones 0 asignados Ver en GitHub

Nadie ha tomado este issue todavía.

Evaluación

Dificultad: 4/5
Tiempo estimado: 3-5 días
Aptitud para principiantes: 45/100

Tipo de issue: Error
Claridad: Necesita aclaración
Estado de actividad: Activo
Stack tecnológico: linux
Área: operating-systems

Línea de trabajo

Reproduce the failure with the AOC ACT3512 connected directly to the Frame rear port, then compare dmesg with the working USB 2.0 hub connection. Start with the xHCI and USB messages, including error -71 and the failed configuration. Done means the dongle is recognized directly and appears in Frame audio settings with working audio.

Escrito por el modelo de indexación a partir del texto del issue.

Descripción

System Info

Steam client version: 790377368
SteamOS version: 0.4.1
Opted into Steam client beta?: [Yes/No] Yes
Opted into SteamOS beta?: [Yes/No] Yes
Have you checked for updates in Settings > System?: Yes

Issue

AOC ACT3512 2.4ghz usb-c audio dongle (for wireless earbuds) does not work when plugged directly into headset

When dongle plugged directly into Frame:

LED on dongle lights up and remains solid (same as on a functioning device)
AOC device not shown in Frame settings menu, and can't be used for audio
see dmesg log below. output is not exactly the same every time, this was one of the more verbose outputs

When dongle is plugged into USB hub then plugged into Frame:

Does work, device is recognized with the correct name in Frame Audio settings. Earbuds produce sound in applications.
Volume control range doesn't seem correct
see dmesg log below for working connection

Other info:

Dongle / earbuds do work with ipad, windows 11 PC, cachyos PC
Product page lists Steam Deck compatibility, so likely a Frame specific issue

dmesg output with dongle plugged in directly:

[  122.197181] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[  122.197208] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[  122.199718] xhci-hcd xhci-hcd.1.auto: hcc params 0x0110ffc5 hci version 0x110 quirks 0x0000808020000810
[  122.199753] xhci-hcd xhci-hcd.1.auto: irq 314, io mem 0x0a600000
[  122.199949] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[  122.199960] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[  122.199971] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.1 Enhanced SuperSpeed
[  122.200501] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
[  122.200507] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  122.200509] usb usb1: Product: xHCI Host Controller
[  122.200510] usb usb1: Manufacturer: Linux 6.18.0-gfbdbca41fd45 xhci-hcd
[  122.200512] usb usb1: SerialNumber: xhci-hcd.1.auto
[  122.200739] hub 1-0:1.0: USB hub found
[  122.200753] hub 1-0:1.0: 1 port detected
[  122.200946] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18
[  122.200949] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  122.200950] usb usb2: Product: xHCI Host Controller
[  122.200952] usb usb2: Manufacturer: Linux 6.18.0-gfbdbca41fd45 xhci-hcd
[  122.200953] usb usb2: SerialNumber: xhci-hcd.1.auto
[  122.201721] hub 2-0:1.0: USB hub found
[  122.201733] hub 2-0:1.0: 1 port detected
[  123.385603] usb 1-1: new full-speed USB device number 2 using xhci-hcd
[  123.510122] usb 1-1: device descriptor read/all, error -71
[  123.621569] usb 1-1: new full-speed USB device number 3 using xhci-hcd
[  123.747877] usb 1-1: New USB device found, idVendor=20d6, idProduct=8302, bcdDevice=10.26
[  123.747892] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  123.747896] usb 1-1: Product: AOC ACT3512
[  123.747901] usb 1-1: Manufacturer: Actions
[  123.747904] usb 1-1: SerialNumber: 0123456789AB
[  123.756641] input: Actions AOC ACT3512 Consumer Control as /devices/platform/soc@0/a600000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:20D6:8302.000C/input/input50
[  123.808294] input: Actions AOC ACT3512 as /devices/platform/soc@0/a600000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:20D6:8302.000C/input/input51
[  123.808941] input: Actions AOC ACT3512 as /devices/platform/soc@0/a600000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:20D6:8302.000C/input/input52
[  123.809713] input: Actions AOC ACT3512 as /devices/platform/soc@0/a600000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:20D6:8302.000C/input/input53
[  123.811156] hid-generic 0003:20D6:8302.000C: input,hiddev96,hidraw0: USB HID v1.10 Device [Actions AOC ACT3512] on usb-xhci-hcd.1.auto-1/input0
[  124.038639] usb usb1-port1: disabled by hub (EMI?), re-enabling...
[  124.038663] usb 1-1: USB disconnect, device number 3
[  124.064274] usb 1-1: 2:1: usb_set_interface failed (-19)
[  124.064350] usb 1-1: 2:1: usb_set_interface failed (-19)
[  124.064413] usb 1-1: 2:1: usb_set_interface failed (-19)
[  124.064501] usb 1-1: 2:1: usb_set_interface failed (-19)
[  124.064632] usb 1-1: 2:1: usb_set_interface failed (-19)
[  124.065042] usb 1-1: 2:1: usb_set_interface failed (-19)
[  124.065096] usb 1-1: 2:1: usb_set_interface failed (-19)
[  124.065145] usb 1-1: 2:1: usb_set_interface failed (-19)
[  124.065208] usb 1-1: 2:1: usb_set_interface failed (-19)
[  124.065294] usb 1-1: 2:1: usb_set_interface failed (-19)
[  124.336675] usb 1-1: new full-speed USB device number 4 using xhci-hcd
[  124.463064] usb 1-1: New USB device found, idVendor=20d6, idProduct=8302, bcdDevice=10.26
[  124.463093] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  124.463103] usb 1-1: Product: AOC ACT3512
[  124.463115] usb 1-1: Manufacturer: Actions
[  124.463123] usb 1-1: SerialNumber: 0123456789AB
[  124.471582] input: Actions AOC ACT3512 Consumer Control as /devices/platform/soc@0/a600000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:20D6:8302.000D/input/input54
[  124.522870] input: Actions AOC ACT3512 as /devices/platform/soc@0/a600000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:20D6:8302.000D/input/input55
[  124.523219] input: Actions AOC ACT3512 as /devices/platform/soc@0/a600000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:20D6:8302.000D/input/input56
[  124.523446] input: Actions AOC ACT3512 as /devices/platform/soc@0/a600000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:20D6:8302.000D/input/input57
[  124.523903] hid-generic 0003:20D6:8302.000D: input,hiddev96,hidraw0: USB HID v1.10 Device [Actions AOC ACT3512] on usb-xhci-hcd.1.auto-1/input0
[  124.752099] usb usb1-port1: disabled by hub (EMI?), re-enabling...
[  124.752122] usb 1-1: USB disconnect, device number 4
[  125.065581] usb 1-1: new full-speed USB device number 5 using xhci-hcd
[  125.190906] usb 1-1: New USB device found, idVendor=20d6, idProduct=8302, bcdDevice=10.26
[  125.190918] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  125.190923] usb 1-1: Product: AOC ACT3512
[  125.190927] usb 1-1: Manufacturer: Actions
[  125.190931] usb 1-1: SerialNumber: 0123456789AB
[  125.199026] input: Actions AOC ACT3512 Consumer Control as /devices/platform/soc@0/a600000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:20D6:8302.000E/input/input58
[  125.250910] input: Actions AOC ACT3512 as /devices/platform/soc@0/a600000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:20D6:8302.000E/input/input59
[  125.251164] input: Actions AOC ACT3512 as /devices/platform/soc@0/a600000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:20D6:8302.000E/input/input60
[  125.251303] input: Actions AOC ACT3512 as /devices/platform/soc@0/a600000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:20D6:8302.000E/input/input61
[  125.251661] hid-generic 0003:20D6:8302.000E: input,hiddev96,hidraw0: USB HID v1.10 Device [Actions AOC ACT3512] on usb-xhci-hcd.1.auto-1/input0
[  125.261969] usb 1-1: 3:1: cannot set freq 48000 to ep 0x81
[  125.970189] usb usb1-port1: disabled by hub (EMI?), re-enabling...
[  125.970230] usb 1-1: USB disconnect, device number 5
[  126.277596] usb 1-1: new full-speed USB device number 6 using xhci-hcd
[  126.402768] usb 1-1: New USB device found, idVendor=20d6, idProduct=8302, bcdDevice=10.26
[  126.402783] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  126.402788] usb 1-1: Product: AOC ACT3512
[  126.402793] usb 1-1: Manufacturer: Actions
[  126.402797] usb 1-1: SerialNumber: 0123456789AB
[  126.410661] input: Actions AOC ACT3512 Consumer Control as /devices/platform/soc@0/a600000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:20D6:8302.000F/input/input62
[  126.461873] input: Actions AOC ACT3512 as /devices/platform/soc@0/a600000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:20D6:8302.000F/input/input63
[  126.462158] input: Actions AOC ACT3512 as /devices/platform/soc@0/a600000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:20D6:8302.000F/input/input64
[  126.462338] input: Actions AOC ACT3512 as /devices/platform/soc@0/a600000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:20D6:8302.000F/input/input65
[  126.462807] hid-generic 0003:20D6:8302.000F: input,hiddev96,hidraw0: USB HID v1.10 Device [Actions AOC ACT3512] on usb-xhci-hcd.1.auto-1/input0
[  126.885070] usb usb1-port1: disabled by hub (EMI?), re-enabling...
[  126.885095] usb 1-1: USB disconnect, device number 6
[  127.186602] usb 1-1: new full-speed USB device number 7 using xhci-hcd
[  127.312128] usb 1-1: New USB device found, idVendor=20d6, idProduct=8302, bcdDevice=10.26
[  127.312142] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  127.312147] usb 1-1: Product: AOC ACT3512
[  127.312151] usb 1-1: Manufacturer: Actions
[  127.312155] usb 1-1: SerialNumber: 0123456789AB
[  127.320247] input: Actions AOC ACT3512 Consumer Control as /devices/platform/soc@0/a600000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:20D6:8302.0010/input/input66
[  127.370893] input: Actions AOC ACT3512 as /devices/platform/soc@0/a600000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:20D6:8302.0010/input/input67
[  127.371179] input: Actions AOC ACT3512 as /devices/platform/soc@0/a600000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:20D6:8302.0010/input/input68
[  127.371350] input: Actions AOC ACT3512 as /devices/platform/soc@0/a600000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:20D6:8302.0010/input/input69
[  127.371794] hid-generic 0003:20D6:8302.0010: input,hiddev96,hidraw0: USB HID v1.10 Device [Actions AOC ACT3512] on usb-xhci-hcd.1.auto-1/input0
[  127.383141] usb 1-1: 3:1: cannot set freq 48000 to ep 0x81
[  127.390526] usb 1-1: 9:1: cannot get min/max values for control 2 (id 9)
[  127.537089] usb usb1-port1: disabled by hub (EMI?), re-enabling...
[  127.537112] usb 1-1: USB disconnect, device number 7
[  127.858604] usb 1-1: new full-speed USB device number 8 using xhci-hcd
[  127.982144] usb 1-1: device descriptor read/all, error -71
[  128.093660] usb 1-1: new full-speed USB device number 9 using xhci-hcd
[  128.219027] usb 1-1: New USB device found, idVendor=20d6, idProduct=8302, bcdDevice=10.26
[  128.219052] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  128.219063] usb 1-1: Product: AOC ACT3512
[  128.219074] usb 1-1: Manufacturer: Actions
[  128.219082] usb 1-1: SerialNumber: 0123456789AB
[  128.227973] usb 1-1: can't set config #1, error -71

dmesg output when dongle is plugged into hub:

[ 5022.993918] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 5022.993945] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[ 5022.996390] xhci-hcd xhci-hcd.1.auto: hcc params 0x0110ffc5 hci version 0x110 quirks 0x0000808020000810
[ 5022.996406] xhci-hcd xhci-hcd.1.auto: irq 314, io mem 0x0a600000
[ 5022.996484] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 5022.996487] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[ 5022.996490] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.1 Enhanced SuperSpeed
[ 5022.996558] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
[ 5022.996561] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5022.996562] usb usb1: Product: xHCI Host Controller
[ 5022.996563] usb usb1: Manufacturer: Linux 6.18.0-gfbdbca41fd45 xhci-hcd
[ 5022.996564] usb usb1: SerialNumber: xhci-hcd.1.auto
[ 5022.996728] hub 1-0:1.0: USB hub found
[ 5022.996739] hub 1-0:1.0: 1 port detected
[ 5022.996869] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18
[ 5022.996871] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5022.996872] usb usb2: Product: xHCI Host Controller
[ 5022.996873] usb usb2: Manufacturer: Linux 6.18.0-gfbdbca41fd45 xhci-hcd
[ 5022.996874] usb usb2: SerialNumber: xhci-hcd.1.auto
[ 5022.997089] hub 2-0:1.0: USB hub found
[ 5022.997099] hub 2-0:1.0: 1 port detected
[ 5024.703283] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 5024.828757] usb 1-1: New USB device found, idVendor=2109, idProduct=2815, bcdDevice= 7.04
[ 5024.828781] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5024.828786] usb 1-1: Product: USB2.0 Hub
[ 5024.828790] usb 1-1: Manufacturer: VIA Labs, Inc.
[ 5024.884942] hub 1-1:1.0: USB hub found
[ 5024.885112] hub 1-1:1.0: 4 ports detected
[ 5025.649312] usb 1-1.3: new full-speed USB device number 3 using xhci-hcd
[ 5029.886336] usb 1-1.3: New USB device found, idVendor=20d6, idProduct=8302, bcdDevice=10.26
[ 5029.886347] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5029.886351] usb 1-1.3: Product: AOC ACT3512
[ 5029.886354] usb 1-1.3: Manufacturer: Actions
[ 5029.886357] usb 1-1.3: SerialNumber: 0123456789AB
[ 5030.798570] input: Actions AOC ACT3512 Consumer Control as /devices/platform/soc@0/a600000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.3/1-1.3:1.0/0003:20D6:8302.0025/input/input147
[ 5030.849505] input: Actions AOC ACT3512 as /devices/platform/soc@0/a600000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.3/1-1.3:1.0/0003:20D6:8302.0025/input/input148
[ 5030.849642] input: Actions AOC ACT3512 as /devices/platform/soc@0/a600000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.3/1-1.3:1.0/0003:20D6:8302.0025/input/input149
[ 5030.849989] input: Actions AOC ACT3512 as /devices/platform/soc@0/a600000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.3/1-1.3:1.0/0003:20D6:8302.0025/input/input150
[ 5030.850153] hid-generic 0003:20D6:8302.0025: input,hiddev96,hidraw0: USB HID v1.10 Device [Actions AOC ACT3512] on usb-xhci-hcd.1.auto-1.3/input0

Lenguaje dominante: Sin datos de lenguaje
Estrellas: 2.6k
Forks: 83
Métricas de merge de PR: Sin PR fusionados en 30 d

Preparar el entorno

Este proyecto no incluye contenedor de desarrollo, Dockerfile ni guía de contribución, así que la configuración corre por tu cuenta: empieza por su README y consulta nuestra guía para la primera contribución para los pasos generales.

Primeros pasos

Lee el issue completo y luego la guía de contribución del proyecto.
Comenta en el issue que vas a ocuparte — evita que dos personas hagan lo mismo.
Haz un fork del repositorio y trabaja en una rama.
Abre un pull request que haga referencia al número del issue.

Más de ValveSoftware/SteamOS

steam-short-session-tracker: incorrect registry backup path resets settings during automatic repair
Abierto
- ¿Algo no está bien?
Dificultad 2/5 1-3 horas Aptitud para principiantes 80/100

ValveSoftware/SteamOS#2829 · Abierto el 24/9/2026
Wiki has links to alternate versions that are now spam websites
Abierto
- ¿Algo no está bien?
Dificultad 1/5 Menos de una hora Aptitud para principiantes 68/100

ValveSoftware/SteamOS#1743 · 1 comentario · 2 reacciones · Abierto el 5/12/2024
Steam Machine unable to log into a different Linux user
Abierto
- ¿Algo no está bien?
Dificultad 4/5 3-5 días Aptitud para principiantes 45/100

ValveSoftware/SteamOS#2849 · Abierto el 28/9/2026
[Regression] Android Binder no longer built into linux-neptune since 6.18
Abierto
- ¿Algo no está bien?
Dificultad 3/5 1-2 días Aptitud para principiantes 66/100

ValveSoftware/SteamOS#2848 · Abierto el 28/9/2026
Steam Deck OLED: QCA2066 Bluetooth times out after S4 hibernation on SteamOS 3.9.1
Abierto
- ¿Algo no está bien?
Dificultad 4/5 3-5 días Aptitud para principiantes 52/100

ValveSoftware/SteamOS#2845 · Abierto el 27/9/2026

Todos los issues de ValveSoftware/SteamOS

Issues similares

sysbox-fs closes a container's seccomp listener on a transient POLLERR, so mount/umount fail with ENOSYS
Abierto
- ¿Algo no está bien?
Dificultad 2/5 1-3 horas Aptitud para principiantes 84/100

nestybox/sysbox#1046 · 1 comentario · Abierto el 29/9/2026
x/sys/unix: solaris/illumos msghdr never sets msg_accrights (aka msg_control)
Abierto
- ¿Algo no está bien?
compiler/runtime

Dificultad 2/5 1-3 horas Aptitud para principiantes 76/100

golang/go#81836 · 2 comentarios · Abierto el 28/9/2026

Los mantenedores suelen responder en 1 día
Amazon Linux 2023 CIS 4.3.4 (re-authentication not disabled globally) is mapped to sudo_require_reauthentication instead of sudo_remove_no_authenticate
Abierto
- ¿Algo no está bien?
Dificultad 2/5 1-3 horas Aptitud para principiantes 88/100

ComplianceAsCode/content#15152 · Abierto el 28/9/2026

Los mantenedores suelen responder en 2 días
Microsoft Edge on Windows Server 2022 is not updating to latest version
Abierto
- ¿Algo no está bien?
Area: Browsers bug report needs triage OS: Windows

Dificultad 2/5 1-3 horas Aptitud para principiantes 68/100

actions/runner-images#14810 · Abierto el 28/9/2026

Los mantenedores suelen responder en 3 días
Hooks run concurrently instead of in the listed order
Abierto
- ¿Algo no está bien?
Dificultad 2/5 1-3 horas Aptitud para principiantes 75/100

urunc-dev/urunc#1066 · Abierto el 28/9/2026

Los mantenedores suelen responder en 1 día

Más issues de Operating Systems

Steam Frame: Full-speed USB device fails on Frame rear port (-71 at SET_CONFIGURATION), works through USB 2.0 hub

¿Algo no está bien?

Evaluación

Línea de trabajo

Descripción

System Info

Issue

Preparar el entorno

Primeros pasos

Más de ValveSoftware/SteamOS

¿Algo no está bien?

¿Algo no está bien?

¿Algo no está bien?

¿Algo no está bien?

¿Algo no está bien?

Issues similares

¿Algo no está bien?

¿Algo no está bien?

¿Algo no está bien?

¿Algo no está bien?

¿Algo no está bien?

Recibe los nuevos issues en tu correo