Initial subset rejection loops in useLiveSuspenseQuery instead of reaching ErrorBoundary
Los mantenedores suelen responder en 1 día
Nadie ha tomado este issue todavía.
Evaluación
- Dificultad
- 4/5
- Tiempo estimado
- 3-5 días
- Aptitud para principiantes
- 57/100
- Tipo de issue
- Error
- Claridad
- Bien especificado
- Estado de actividad
- Activo
- Stack tecnológico
- react, typescript
- Área
- backend
Línea de trabajo
Start with packages/react-db/src/useLiveSuspenseQuery.ts, especially SuspenseBinding.resolve and the zero-delay retry-entry release described in the issue. Reproduce with the supplied Vite fixture and ?fail, then trace how the failed resource is retained through React’s retry and collection cleanup. Done when one failed load reaches the surrounding ErrorBoundary without repeated loader calls, while cleanup and recovery behavior remain correct.
Escrito por el modelo de indexación a partir del texto del issue.
Descripción
Describe the bug
A rejected initial loadSubset under useLiveSuspenseQuery + DbProvider can repeatedly recreate the query and call the failing loader instead of reaching the surrounding ErrorBoundary.
This reproduction only returns Promise.reject(error). It does not call sync.fail, configure retries, use short gcTime, or perform a refetch. It therefore also affects query-local first-load errors.
Expected / actual
- Expected: one failed initial acquisition, followed by the ErrorBoundary receiving
Subset denied. - Actual: the fallback stays visible and loads repeat. The included isolated browser run made 5,864 loader calls in about one second, with no boundary output. Exact counts vary with machine speed.
- Retaining the failed Suspense resource until normal collection cleanup gives one loader call and the expected ErrorBoundary.
Reproduction
Use a Vite React/TypeScript app with @tanstack/[email protected], @tanstack/[email protected], [email protected], and [email protected]. Replace src/main.tsx with the code below. The HTML should contain <div id="root"></div>.
No router, external service, persistence adapter, fragments, React Compiler, or application-specific code is required. The two URL modes share a fixture so they can also act as controls.
Complete main.tsx
import { collectionOptions, DbClient, eq } from '@tanstack/db';
import { DbProvider, useLiveSuspenseQuery } from '@tanstack/react-db';
import { Component, Suspense, useLayoutEffect, useState, type ReactNode } from 'react';
import { createRoot } from 'react-dom/client';
// Run ?fail for the rejection case; omit it for synchronous cached queries.
const fail = new URLSearchParams(location.search).has('fail');
const metrics = { loads: 0, fallbacks: 0, rendered: 0, start: 0, elapsed: 0 };
const items = collectionOptions({
id: 'items',
getKey: (row: { id: string; title: string }) => row.id,
syncMode: 'on-demand',
sync: {
sync: ({ begin, write, commit, markReady }) => {
begin();
for (let i = 0; i < 20; i++) {
write({ type: 'insert', value: { id: String(i), title: `Item ${i}` } });
}
void commit();
markReady();
return {
loadSubset: () => {
metrics.loads++;
return fail ? Promise.reject(new Error('Subset denied')) : true;
},
};
},
},
});
const client = new DbClient();
const source = client.collection(items);
await source.preload();
function Detail({ id }: { id: string }) {
metrics.rendered++;
const { data } = useLiveSuspenseQuery(q =>
q.from({ item: source })
.where(({ item }) => eq(item.id, id))
.select(({ item }) => ({ title: item.title }))
.findOne(),
);
useLayoutEffect(() => {
metrics.elapsed = performance.now() - metrics.start;
console.log('committed', { ...metrics });
}, [id]);
return <output data-testid="result">{data?.title}</output>;
}
function Pending() {
useLayoutEffect(() => { metrics.fallbacks++; }, []);
return <p data-testid="pending">Pending</p>;
}
class Boundary extends Component<{ children: ReactNode }, { error?: string }> {
state: { error?: string } = {};
static getDerivedStateFromError(error: Error) { return { error: error.message }; }
render() {
return this.state.error
? <p data-testid="error">{this.state.error}</p>
: this.props.children;
}
}
function ReadyExample() {
// A mounted inventory query already holds the source rows.
useLiveSuspenseQuery(q => q.from({ item: source }).select(({ item }) => ({ id: item.id })));
const [id, setId] = useState<number>();
return <>
<button onClick={() => {
metrics.start = performance.now();
setId(previous => (previous ?? -1) + 1);
}}>Select cached row</button>
{id !== undefined && <Suspense key={id} fallback={<Pending />}>
<Detail id={String(id)} />
</Suspense>}
</>;
}
const root = createRoot(document.getElementById('root')!);
root.render(<DbProvider client={client}>
<Boundary>
<Suspense fallback={<Pending />}>
{fail ? <Detail id="0" /> : <ReadyExample />}
</Suspense>
</Boundary>
</DbProvider>);
Reflect.set(window, 'repro', {
metrics,
close: async () => { root.unmount(); await client.cleanup(); },
});
Open with ?fail. Read window.repro.metrics.loads, inspect the pending/error elements, and call window.repro.close() or close the page afterward to stop the loop.
Suspected cause
SuspenseBinding.resolve in packages/react-db/src/useLiveSuspenseQuery.ts evicts the retry entry with setTimeout(release, 0) when the collection becomes error or crashed. The failed resource can disappear before React retries the initially suspended render. That retry creates a fresh resource, which starts the same failing load again.
Keeping that entry through the React retry, and releasing it on the collection's ordinary cleaned-up event, fixes this reproduction. It still needs to respect explicit cleanup/recovery and abandoned-query lifetime; the proposal is not to keep failures forever.
Related: #1343 was closed after error forwarding was fixed. This appears to be a remaining resource-lifetime case, rather than missing observer-error forwarding. #2396 uses the success mode of the same small fixture for a separate synchronous-readiness problem.
Versions
@tanstack/db / @tanstack/react-db 1.0.0-rc.1.4, React / React DOM 19.3.0, Chromium on macOS ARM64. The zero-delay eviction remains on current main. No router, React Compiler, application adapter, or persistence is involved.
- Lenguaje dominante
- TypeScript
- Estrellas
- 4k
- Forks
- 286
- Merge medio
- 1 d 8 h
- PR fusionados (30 d)
- 105
Preparar el entorno
- Sin Dockerfile ni archivo de Docker Compose
- Tiene una plantilla de pull request
- Leer la guía de contribución
Primeros pasos
- Lee el issue completo y luego la guía de contribución del proyecto.
- Comenta en el issue que vas a ocuparte — evita que dos personas hagan lo mismo.
- Haz un fork del repositorio y trabaja en una rama.
- Abre un pull request que haga referencia al número del issue.
Más de TanStack/db
-
extractSimpleComparisons returns value: null when the right side of a comparison isn't a literalAbierto
Dificultad 2/5 1-3 horas Aptitud para principiantes 82/100
Los mantenedores suelen responder en 1 día
-
`avg`, `min`, `max` and `sum` treat `null` values as `0`Posiblemente ocupada @oyobbeb la tomó hace 11 días. Abierto
Dificultad 2/5 1-3 horas Aptitud para principiantes 76/100
Los mantenedores suelen responder en 1 día
-
`Collection.currentStateAsChanges` JSDoc examples don’t match `CurrentStateAsChangesOptions`Posiblemente ocupada Un pull request vinculado a esta issue está abierto o ya se fusionó. Abierto
Dificultad 1/5 1-3 horas Aptitud para principiantes 88/100
Los mantenedores suelen responder en 1 día
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 78/100
Los mantenedores suelen responder en 1 día
-
Two @tanstack/db tests time out under CPU load because a cold module import counts against the 5 s default timeoutPosiblemente ocupada @jp-knj la tomó hace 23 días. Abierto
Dificultad 2/5 1-3 horas Aptitud para principiantes 82/100
Los mantenedores suelen responder en 1 día
Todos los issues de TanStack/db
Issues similares
-
Dificultad 2/5 1-3 horas Aptitud para principiantes 78/100
fb55/htmlparser2#2579 ·
Los mantenedores suelen responder en 1 día
-
bug good first issue needs-review
Dificultad 1/5 1-3 horas Aptitud para principiantes 83/100
Los mantenedores suelen responder en 1 día
-
Add Module DB RulesAbiertodocumentation public
Dificultad 1/5 1-3 horas Aptitud para principiantes 68/100
midnightntwrk/umbradb#65 ·
Los mantenedores suelen responder en 2 días
-
area/channels kind/bug priority/medium
Dificultad 2/5 1-3 horas Aptitud para principiantes 78/100
nanocoai/nanoclaw#4501 · 1 comentario ·
Los mantenedores suelen responder en 1 día
-
Docker images: plain X.Y.Z tag (e.g. 7.2.3) is never updated after the initial release buildAbiertoneeds verification
Dificultad 2/5 1-3 horas Aptitud para principiantes 74/100
Los mantenedores suelen responder en 13 días