Compile is 1.5–3× slower than QuickJS: the stack-code layer and front-end allocation
Dieses Issue hat noch niemand übernommen.
Bewertung
- Schwierigkeit
- 5/5
- Geschätzter Aufwand
- Über eine Woche
- Anfängerfreundlichkeit
- 30/100
- Issue-Typ
- Refactoring
- Klarheit
- Größtenteils klar
- Aktivitätsstatus
- Aktiv
- Tech-Stack
- rust
- Bereich
- compilers, performance
Rechercherichtung
Start with the compiler path described in the issue: lexer and parser, FunctionIr, resolution, lowering, flow, and register::analysis; use compile_matrix.py and the listed profiles to locate the measured costs. The proposed direct IR-to-register lowering and front-end allocation changes span several compiler subsystems. Done means reaching within 1.5× of QuickJS on every listed corpus row while keeping Test262, the differential corpus, and register-stress unchanged.
Vom Indexierungsmodell aus dem Issue-Text verfasst.
Beschreibung
Compile-only throughput of 0.3.0 against QuickJS 2026-06-04 (compile_matrix.py, generated corpus, one process per sample, median of 5, Ryzen 7 7840HS):
| Corpus | Size | oxide MB/s | QuickJS MB/s | QuickJS faster by |
|---|---|---|---|---|
| expressions | 64 KB | 11.7 | 27.2 | 2.3× |
| expressions | 512 KB | 10.0 | 29.7 | 3.0× |
| expressions | 4 MB | 10.3 | 25.0 | 2.4× |
| functions | 64 KB | 8.1 | 14.1 | 1.7× |
| syntax-mixed | 64 KB | 6.8 | 10.3 | 1.5× |
(At 512 KB and 4 MB the functions and syntax-mixed corpora are superlinear in QuickJS, so those rows are left out; see the name-resolution issue for ours.)
The whole-program effect shows in Octane CodeLoad, 2.32× QuickJS's time: 56% of its samples are in the compiler and another 33% in malloc/free, mostly compile-time allocation. Top symbols: Lexer::next_token_into 8.8%, _int_malloc 4.8%, Parser::probe_token 4.7%, lowering::lower_unlinked_tree 4.1%, lowering::lower_ops 4.1%, register::analysis::analyze 4.0%.
Where the work goes
Source reaches register code through: lexer and parser → linear FunctionIr → resolution → lowering to QuickJS-shaped stack code (UnlinkedFunction) → relocation/flow/optimize → register::analysis (re-derives stack depth and catch regions per instruction) → register lowering → CodeStore::publish validation. QuickJS emits bytecode while parsing and then runs resolve_variables and resolve_labels.
- The stack code is a complete intermediate representation (instructions, constants, debug tables, closure-variable tables) whose only consumer is the register lowering.
- Stack depth is computed twice (
flowandregister::analysis); source positions are projected for stack code and mapped again for register code. - The lexer re-scans by cloning itself (
probe_token), and the front end allocates per identifier and per function table without an arena.
Direction
- Lower from the IR (after
resolution) straight to register code, removing the stack-code layer and its second analysis. - Until then: hand
flow's depths to the register lowering instead of recomputing them; cut front-end allocation (arena or reused buffers; no lexer clones for lookahead).
Acceptance: compile throughput within 1.5× of QuickJS on every corpus row above, with Test262, the differential corpus and register-stress unchanged.
- Vorherrschende Sprache
- Rust
- Sterne
- 61
- Forks
- 2
- PR-Merge-Kennzahlen
- Keine gemergten PRs in 30 T.
Entwicklungsumgebung
Die Einrichtungsdateien dieses Projekts haben wir noch nicht geprüft. Beginnen Sie mit der README; die allgemeinen Schritte stehen in unserem Leitfaden für den ersten Beitrag.
Erste Schritte
- Lesen Sie das ganze Issue und danach den Beitragsleitfaden des Projekts.
- Schreiben Sie ins Issue, dass Sie es übernehmen — das erspart doppelte Arbeit.
- Forken Sie das Repository und arbeiten Sie in einem Branch.
- Öffnen Sie einen Pull Request, der die Issue-Nummer nennt.
Mehr aus pocket-stack/quickjs-oxide
-
Schwierigkeit 4/5 3-5 Tage Anfängerfreundlichkeit 44/100
pocket-stack/quickjs-oxide#192 · 3 Kommentare ·
-
performance.now() bypasses Host and uses std::time::Instant (unsupported on wasm32-unknown-unknown)Offenbug
Schwierigkeit 4/5 3-5 Tage Anfängerfreundlichkeit 52/100
pocket-stack/quickjs-oxide#165 · 1 Kommentar ·
-
Two public SystemHost types: the core one is always UTC, the host crate's uses the system time zoneOffenenhancement
Schwierigkeit 3/5 1-2 Tage Anfängerfreundlichkeit 52/100
pocket-stack/quickjs-oxide#164 ·
-
bug
Schwierigkeit 4/5 3-5 Tage Anfängerfreundlichkeit 56/100
pocket-stack/quickjs-oxide#163 ·
-
Schwierigkeit 5/5 Über eine Woche Anfängerfreundlichkeit 35/100
pocket-stack/quickjs-oxide#158 · 1 Kommentar ·
Alle Issues in pocket-stack/quickjs-oxide
Ähnliche Issues
-
Schwierigkeit 2/5 1-3 Stunden Anfängerfreundlichkeit 70/100
-
Wait for the IDS correction dialog to settle in the stale-audit testEvtl. vergeben @louistrue hat das heute übernommen. Offenready
Schwierigkeit 2/5 1-3 Stunden Anfängerfreundlichkeit 68/100
Maintainer antworten meist innerhalb von 1 Tag
-
good first issue help wanted
Schwierigkeit 2/5 1-3 Stunden Anfängerfreundlichkeit 70/100
dutchman-cad/dutchman#874 ·
Maintainer antworten meist innerhalb von 1 Tag
-
bug good first issue ready
Schwierigkeit 2/5 1-3 Stunden Anfängerfreundlichkeit 78/100
MartinPTielemans/ilo#3840 ·
Maintainer antworten meist innerhalb von 1 Tag
-
bug file-compat priority: medium
Schwierigkeit 2/5 1-3 Stunden Anfängerfreundlichkeit 68/100
storytold/wordcraft#7248 · 1 Kommentar ·
Maintainer antworten meist innerhalb von 4 Tagen