Hacktoberfest 2026: die Issues, die Maintainer für den Oktober markiert haben – offen und einsteigerfreundlich. Hacktoberfest-Issues durchsuchen

DeFooocus_colab.ipynb Suddenly Error and Need Help

Offen
  • Stimmt etwas nicht?
#1,415 0 Kommentare 0 Reaktionen 0 zugewiesene Personen Auf GitHub ansehen

Dieses Issue hat noch niemand übernommen.

Bewertung

Schwierigkeit
4/5
Geschätzter Aufwand
3-5 Tage
Anfängerfreundlichkeit
15/100
Issue-Typ
Bug
Klarheit
Muss geklärt werden
Aktivitätsstatus
Veraltet
Tech-Stack
python
Bereich
devtools

Rechercherichtung

Beginne mit der gemeldeten Installationsausgabe von Python 3.12 und dem Traceback durch /content/DeFooocus/entry_with_update.py, launch.py und requirements_versions.txt. Prüfe, ob der Build-Fehler von pygit2 mit diesem Repository zusammenhängt, bevor du feststellst, welche Änderung erwartet wird; als erledigt würde dies einen reproduzierbaren, repositoriespezifischen Fehler und eine definierte Behebung erfordern.

Vom Indexierungsmodell aus dem Issue-Text verfasst.

Beschreibung

Hi,
I am new to this kind of AI tools and have 0 knowledge or experience on it before, I just find it on google and just used it for less than 1 month but it is suddenly give me error state like this:

[DeFooocus] Preparing ...
Installing build dependencies ... done
Getting requirements to build wheel ... done
Installing backend dependencies ... done
Preparing metadata (pyproject.toml) ... done
error: subprocess-exited-with-error

× Building wheel for pygit2 (pyproject.toml) did not run successfully.
│ exit code: 1
╰─> See above for output.

note: This error originates from a subprocess, and is likely not a problem with pip.
Building wheel for pygit2 (pyproject.toml) ... error
ERROR: Failed building wheel for pygit2
error: failed-wheel-build-for-install

× Failed to build installable wheels for some pyproject.toml based projects
╰─> pygit2
/content
fatal: destination path 'DeFooocus' already exists and is not an empty directory.
/content/DeFooocus
Installing build dependencies ... done
Getting requirements to build wheel ... done
Preparing metadata (pyproject.toml) ... done
Installing build dependencies ... done
error: subprocess-exited-with-error

× Getting requirements to build wheel did not run successfully.
│ exit code: 1
╰─> See above for output.

note: This error originates from a subprocess, and is likely not a problem with pip.
Getting requirements to build wheel ... error
error: subprocess-exited-with-error

× Getting requirements to build wheel did not run successfully.
│ exit code: 1
╰─> See above for output.

note: This error originates from a subprocess, and is likely not a problem with pip.
[DeFooocus] Starting ...
Already up-to-date
Update succeeded.
[System ARGV] ['entry_with_update.py', '--share', '--attention-split', '--always-high-vram', '--disable-offload-from-vram', '--all-in-fp16', '--theme', 'dark']
Python 3.12.11 (main, Jun 4 2025, 08:56:18) [GCC 11.4.0]
Fooocus version: 0.2
Error checking version for torchsde: No package metadata was found for torchsde
Installing requirements
Couldn't install requirements.
Command: "/usr/bin/python3" -m pip install -r "requirements_versions.txt" --prefer-binary
Error code: 1
stdout: Collecting torchsde==0.2.6 (from -r requirements_versions.txt (line 1))
Using cached torchsde-0.2.6-py3-none-any.whl.metadata (5.3 kB)
Collecting einops==0.4.1 (from -r requirements_versions.txt (line 2))
Using cached einops-0.4.1-py3-none-any.whl.metadata (10 kB)
Collecting transformers==4.30.2 (from -r requirements_versions.txt (line 3))
Using cached transformers-4.30.2-py3-none-any.whl.metadata (113 kB)
Collecting safetensors==0.3.1 (from -r requirements_versions.txt (line 4))
Using cached safetensors-0.3.1.tar.gz (34 kB)
Installing build dependencies: started
Installing build dependencies: finished with status 'done'
Getting requirements to build wheel: started
Getting requirements to build wheel: finished with status 'done'
Preparing metadata (pyproject.toml): started
Preparing metadata (pyproject.toml): finished with status 'done'
Collecting accelerate==0.21.0 (from -r requirements_versions.txt (line 5))
Using cached accelerate-0.21.0-py3-none-any.whl.metadata (17 kB)
Collecting pyyaml==6.0 (from -r requirements_versions.txt (line 6))
Using cached PyYAML-6.0.tar.gz (124 kB)
Installing build dependencies: started
Installing build dependencies: finished with status 'done'
Getting requirements to build wheel: started
Getting requirements to build wheel: finished with status 'error'

stderr: error: subprocess-exited-with-error

× Getting requirements to build wheel did not run successfully.
│ exit code: 1
╰─> See above for output.

note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error

× Getting requirements to build wheel did not run successfully.
│ exit code: 1
╰─> See above for output.

note: This error originates from a subprocess, and is likely not a problem with pip.

CMD Failed requirements: install -r "requirements_versions.txt"
Total VRAM 15095 MB, total RAM 12978 MB
Forcing FP16.
Set vram state to: HIGH_VRAM
Device: cuda:0 Tesla T4 : native
VAE dtype: torch.float32
Using split optimization for cross attention
Traceback (most recent call last):
File "/content/DeFooocus/entry_with_update.py", line 46, in
from launch import *
File "/content/DeFooocus/launch.py", line 128, in
from webui import *
File "/content/DeFooocus/webui.py", line 10, in
import modules.async_worker as worker
File "/content/DeFooocus/modules/async_worker.py", line 3, in
from modules.patch import PatchSettings, patch_settings, patch_all
File "/content/DeFooocus/modules/patch.py", line 10, in
import ldm_patched.k_diffusion.sampling
File "/content/DeFooocus/ldm_patched/k_diffusion/sampling.py", line 6, in
import torchsde
ModuleNotFoundError: No module named 'torchsde'

what wrong with this? can someone help me? i already try steps from google to resolve it but is still like this. I also send email to google technical team but that is nothing until now

Vorherrschende Sprache
Python
Sterne
1.7k
Forks
408
Ø Merge
2 T. 57 Min.
Gemergte PRs (30 T.)
7

Entwicklungsumgebung

Erste Schritte

  1. Lesen Sie das ganze Issue und danach den Beitragsleitfaden des Projekts.
  2. Schreiben Sie ins Issue, dass Sie es übernehmen — das erspart doppelte Arbeit.
  3. Forken Sie das Repository und arbeiten Sie in einem Branch.
  4. Öffnen Sie einen Pull Request, der die Issue-Nummer nennt.

Mehr aus libgit2/pygit2

Alle Issues in libgit2/pygit2

Ähnliche Issues

Weitere Issues zu Python

Neue Issues direkt in Ihr Postfach

Eine kurze Übersicht über anfängerfreundliche GitHub-Issues.