Hacktoberfest 2026: die Issues, die Maintainer für den Oktober markiert haben – offen und einsteigerfreundlich. Hacktoberfest-Issues durchsuchen

Swarm health manager log

Offen
  • Stimmt etwas nicht?
#1,382 0 Kommentare 0 Reaktionen 0 zugewiesene Personen Auf GitHub ansehen

Maintainer antworten meist innerhalb von 1 Tag

Dieses Issue hat noch niemand übernommen.

Bewertung

Schwierigkeit
1/5
Geschätzter Aufwand
Unter einer Stunde
Anfängerfreundlichkeit
15/100
Issue-Typ
Feature
Klarheit
Muss geklärt werden
Aktivitätsstatus
Aktiv
Tech-Stack
github-actions, rust
Bereich
devops

Rechercherichtung

The issue contains a generated swarm health report, but it does not specify a code change or name a file or test to work on. Start by reading the report and identifying a concrete requested change; done cannot be determined from the issue as written.

Vom Indexierungsmodell aus dem Issue-Text verfasst.

Beschreibung

swarm-health

[agent] Swarm manager: run 2026-10-11T11:57Z (first run; this issue and the swarm-health label were created this run)

State: GREEN

Every GREEN condition holds: 0 queued and 0 in-progress Actions runs, so no GitHub-hosted jobs are queued. The merge queue is empty. 1 PR is waiting on a human. 4,887 API requests were left at the start of the run, and no managed routine failed.

No schedule changes this run. The rules allow speeding up the product fixer, because 148 triaged issues are eligible and unclaimed. I held off for three reasons:

  • This is the first measured run, with no history yet.
  • Most routines were re-enabled at 11:13Z, so there is no post-restart data.
  • The fixer's current run, fired at 11:20Z, was still going after about 37 minutes. A 30-minute cadence would probably make runs overlap.

I'll look at it again once I have run durations from two GREEN runs.

Metrics

Metric This run 6 h ago 24 h ago
Runs queued / in progress (socket-patch) 0 / 0 n/a n/a
GitHub-hosted jobs queued / oldest queued 0 / none n/a n/a
depscan queued (org signal) not measurable (no access to depscan from this session) n/a n/a
Merge-queue entries / longest wait 0 / – n/a n/a
Merges into main, last 6 h / 24 h 0 / 29
Open PRs (draft / in-progress / ready for review / approved) 2 (1 / 1 / 1 / 0) n/a n/a
Oldest ready-for-review PR #1380, about 11 h old
PRs opened / merged or closed, last 24 h 2 / 29
Open issues 173 (100 bughunt) n/a n/a
Issues opened / closed, last 24 h 1 (0 bughunt) / 38
agent:needs-human 8
Eligible unclaimed agent:triaged 148 (approx.)
API remaining at start 4,904
Main: latest ci.yml push run / latest scheduled full-scope run success (01:02Z) / success (05:47Z)
Enabled bughunt-* workflows 0 (37 hunt/compat/bench/ledger workflows are disabled)

Managed routines

Routine Cron Enabled Last run
Issue triage + fix (product) trig_01RG8W22by47eK1tbe9jBjco 20 * * * * (hourly) yes running since 11:20Z
Issue fixer: CI & build lane trig_015fMrRtXDsAPfQKCCVFUcUk 50 * * * * (hourly) yes running since 11:50Z (routine created 11:37Z)
PR burn-down trig_01CkssbwXU1Hm5Ew8XvCULeD 7 * * * * (hourly) yes last ran 10-09 20:10Z, succeeded (re-enabled 11:13Z today)
PR final review + merge steward trig_01JPjo6g2e9H4gSnmSuedHKW 47 * * * * (hourly) yes succeeded, 11:47–11:58Z
CI janitor trig_01R8ysuPrTj5isuxsRdB8orb 37 * * * * (hourly) yes succeeded, 11:37–11:41Z
Issue & discussion janitor trig_01KNb1HxawPKDwsX66Fi1nEb 17 13 * * * (daily) yes last ran 10-09, succeeded
Bug hunts (all 20) every 6 h, or weekdays no (all disabled, all on HOLD) last ran 10-09 or earlier

Changes this run

None.

Needs a human

  • Review these: #1380 "Hide API tokens in help and simplify v5 CLI docs". It has been ready for about 11 h, CI is green (36 checks passed, 48 skipped) and auto-merge is armed. Approving it sends it straight to the merge queue.
  • HOLD routines that are enabled: CI profiler trig_018Aa5s4K6eCHiZpiRx9eYQH (15 */4), submodule auto-bump trig_019jnAoKzxKirsPpNUPj16is (0 10 * * *) and bench steward trig_01D498UYc7vvzNoCsPfj9M9x (47 6 * * *). All three were updated at 11:13Z today, which looks deliberate. I don't change HOLD routines. If they should run, remove them from hold below; if not, disable them.
  • HOLD IDs that list_triggers didn't return: trig_01MwFn5EYKHCD1FNYAdbC1xN (audit CLI+core), trig_011c8MKh4EpUVLRoY9utrxKc (audit ecosystems), trig_01MubtjjqgwCBaaCvujLV69U (v5 blocker burn-down) and trig_01YJDeWJdcV9oqp7vBEdYMAe (architecture refactor). The architecture refactor routine that does exist is trig_01NTdy2rEpze5NfvsG6RNs4v, which is disabled; I added it to hold. The other IDs may have been deleted or moved to a project.
  • Org-wide signal: this routine's session has no GitHub access to SocketDev/depscan, so I can't measure depscan's queue. Granting read access to depscan in this routine's environment would let me check the org-wide runner signal properly.
  • Naming nit: the "issue & discussion janitor (hourly)" routine actually runs daily at 13:17Z.
{
  "hold": ["bughunt:*", "workflow:bughunt-*.yml", "trig_01BVGYbbHdmPkG8HvdN6tTxP", "trig_012s6oR7LQXyJJ1A8SbhtEq6", "trig_0195sdwRw5i8vD6dPQRER34t", "trig_019gzNxmuqQXxDHbC7Uoi1vQ", "trig_01HTRW3hDwUf4etWvcwpAq5e", "trig_01Jf3eLQ7p17cgz3DvnrTo6N", "trig_01LJu5wvnNmVsNJtQBbUj2WH", "trig_01TB4Wh26CX826bt9q1yqKoQ", "trig_01Y2M7erbpqfRpVYicJHBFsc", "trig_01YN8YPNENDBtnEaxS3rpbCU", "trig_018Z39m8d7ky29n1n4DJ94mB", "trig_01QRsTZhehm5Lrkqbj42wzsa", "trig_01EVLZKMQWfpejqu4fopiKQA", "trig_0156piJhgZYH8LWJ6TCHRV5B", "trig_01WH3BKQDSxpJ1YRrAGugjoV", "trig_013w4BBSfwBTgFpi5XeZoieR", "trig_01TuYcCKKBDiA7UqBU8rGmaX", "trig_016J8Uw7v3pjq7NLwqsL54NK", "trig_0191QAYmmqcUkTtH6xNXwjXN", "trig_01CZVKDdS68fCBhuqec4CDwN", "trig_01MwFn5EYKHCD1FNYAdbC1xN", "trig_011c8MKh4EpUVLRoY9utrxKc", "trig_01MubtjjqgwCBaaCvujLV69U", "trig_01YJDeWJdcV9oqp7vBEdYMAe", "trig_01NTdy2rEpze5NfvsG6RNs4v", "trig_018LGcKNGskkaatPMs9vvVLY", "trig_018Aa5s4K6eCHiZpiRx9eYQH", "trig_01D498UYc7vvzNoCsPfj9M9x", "trig_01Pwpsh7b5GvmXmJC9xbPGCF", "trig_019jnAoKzxKirsPpNUPj16is", "workflow:*-compatibility.yml", "workflow:bench*", "workflow:*-ledger.yml(except janitor-ledger.yml)", "workflow:installer-drift", "workflow:vlt-serve-watchdog"],
  "changes": [],
  "baseline": {
    "trig_01RG8W22by47eK1tbe9jBjco": "20 * * * *",
    "trig_015fMrRtXDsAPfQKCCVFUcUk": "50 * * * *",
    "trig_01CkssbwXU1Hm5Ew8XvCULeD": "7 * * * *",
    "trig_01JPjo6g2e9H4gSnmSuedHKW": "47 * * * *",
    "trig_01R8ysuPrTj5isuxsRdB8orb": "37 * * * *",
    "trig_01KNb1HxawPKDwsX66Fi1nEb": "17 13 * * *"
  },
  "metrics": [
    {"t": "2026-10-11T11:57Z", "state": "GREEN", "runs_queued": 0, "runs_in_progress": 0, "gh_hosted_queued": 0, "oldest_queued_min": 0, "mq_entries": 0, "mq_max_wait_min": 0, "merges_6h": 0, "merges_24h": 29, "open_prs": 2, "prs_ready_human": 1, "oldest_ready_h": 11, "prs_opened_24h": 2, "prs_closed_24h": 29, "open_issues": 173, "issues_opened_24h": 1, "issues_opened_24h_bughunt": 0, "issues_closed_24h": 38, "needs_human": 8, "eligible_triaged": 148, "api_remaining": 4904, "main_push": "success", "main_full": "success", "depscan": "n/a"}
  ]
}

Generated by Claude Code

Vorherrschende Sprache
Rust
Sterne
8
Forks
0
Ø Merge
19 Std. 44 Min.
Gemergte PRs (30 T.)
450

Entwicklungsumgebung

Erste Schritte

  1. Lesen Sie das ganze Issue und danach den Beitragsleitfaden des Projekts.
  2. Schreiben Sie ins Issue, dass Sie es übernehmen — das erspart doppelte Arbeit.
  3. Forken Sie das Repository und arbeiten Sie in einem Branch.
  4. Öffnen Sie einen Pull Request, der die Issue-Nummer nennt.

Mehr aus SocketDev/socket-patch

Alle Issues in SocketDev/socket-patch

Ähnliche Issues

Weitere Issues zu Rust

Neue Issues direkt in Ihr Postfach

Eine kurze Übersicht über anfängerfreundliche GitHub-Issues.