Session token cache drops every token when the device clock runs fast, so the poller mints a token every 1.5 s (fast-clock side of #10401)

Open
#10,575 1 comment 0 reactions 0 assignees View on GitHub

Maintainers usually reply within 1 day

Nobody has claimed this yet.

  • #10583 by @umeraamir69 — closed without merging

Assessment

Difficulty
4/5
Estimated time
3-5 days
Newbie friendliness
28/100
Issue type
Bug
Clarity
Mostly clear
Activity status
Active

Research direction

The bug sits in the session token cache, where expiresAt is computed as Math.min(l.exp, n.createdAt + l.exp - l.iat), and in startPollingForSessionToken, which calls session.getToken() every 1500 ms or 5000 ms. Reproduce by overriding Date.now to add about 200 s and watching for repeated POST …/tokens calls. Done means a freshly minted token stays cached under a fast clock, but the issue leaves the fix approach open, so confirm the direction with maintainers first; the linked PR #10583 was closed without merging.

Written by the indexing model from the issue text.

Description

Packages
  • @clerk/clerk-js 6.42.1 (latest; same in 6.42.2-canary.v20261102095039). Same effect in 6.41.0, 6.7.5 and 6.3.3.
  • Loaded via @clerk/vue 2.0.7 and @clerk/react 6.14.x (CDN @clerk/clerk-js@6), and bundled directly.
What happens

When the device clock runs about a minute or more fast, clerk-js discards every session token as soon as it is cached. Every getToken() call and every poller tick then goes to POST /v1/client/sessions/{id}/tokens.

Measured with one focused tab and the clock 200 s ahead: 43 token POSTs in 71 s, versus one every ~44 s with a correct clock. With about ten tabs open the Frontend API answers 429, getToken() keeps retrying (up to 8 times online, ~160 s), and anything that waits for a token stalls.

This is not theoretical: within four days we saw two production clients whose clocks were +198 s and +224 s off (one after a laptop battery had run completely flat).

Reproduction
  1. Sign in to any app that uses clerk-js 6.42.1.
  2. Set the OS clock ~3 minutes ahead, or in DevTools: const real = Date.now.bind(Date); Date.now = () => real() + 200_000;
  3. Keep the tab focused and watch the network panel: POST …/tokens about every 1.5 s (every 5 s when the tab is not focused).
Cause

In 6.42.1 the cache entry is created with createdAt: Math.floor(Date.now() / 1e3) and stores

expiresAt: Math.min(l.exp, n.createdAt + l.exp - l.iat)

and both the read path and the eviction timer compare it with the device clock (expiresAt - Math.floor(Date.now() / 1e3), evict at <= 5 / <= 0). With a fast clock localInsert + lifetime is later than exp, so min() picks the server exp, and exp - localNow is already negative (or below the 5 s buffer) at insert. The entry is dropped at once. Before 6.42 the check was (exp - iat) - (localNow - iat) <= 5, which has the same effect.

The poller (startPollingForSessionToken, 1500 ms while document.hasFocus(), else 5000 ms) calls session.getToken() on every tick, so every tick mints a token. Focus and visibilitychange refreshes add more.

#10401 states this directly ("Fast clocks behave as before") and notes that the clock offset cannot be measured in the browser because FAPI does not expose Date cross-origin. #10361, which would have aged tokens from the local insert time, was closed in favour of #10401.

Suggested fix

Any of these would make a fast clock harmless:

  1. For a token this client has just minted (response of POST …/tokens), judge freshness by local elapsed time since insert against the token lifetime (exp - iat), as in #10361. Keep the current min() behaviour only for tokens that arrive already aged (hydrated lastActiveToken, another tab's broadcast), which is the case #10401 was protecting.
  2. Or estimate the clock offset once from a freshly minted token (localInsert - iat, accurate to about the request time) and use it in every Date.now() comparison of the token cache and poller.
  3. Or add Date to the Frontend API's Access-Control-Expose-Headers, so the SDK can measure the offset from any FAPI response.

As a workaround we are moving our GraphQL auth links to a token cache of our own that ages tokens with the monotonic clock since receipt, so our own requests stop depending on the device clock. The poller and focus refresh inside clerk-js still mint at the rates above, and only a fix in clerk-js can stop that.

Dominant language
TypeScript
Stars
1.8k
Forks
492
Avg merge
1d 8h
Merged PRs (30d)
374

Getting set up

First steps

  1. Read the whole issue, then the project's contributing guide.
  2. Comment on the issue to say you are picking it up — it saves two people doing the same work.
  3. Fork the repository and make your change on a branch.
  4. Open a pull request that references the issue number.

More from clerk/javascript

All issues in clerk/javascript

Similar issues

More TypeScript issues

Get new issues in your inbox

A short digest of beginner-friendly GitHub issues.