[V43.1] Using two screens on an AMD R9 380x graphics card can result in a black screen

Open
#16,149 1 comment 0 reactions 0 assignees View on GitHub

Maintainers usually reply within 1 day

Nobody has claimed this yet.

Assessment

Difficulty
4/5
Estimated time
3-5 days
Newbie friendliness
35/100
Issue type
Bug
Clarity
Mostly clear
Activity status
Quiet
Tech stack
linux

Research direction

Start by reviewing the attached support archive and comparing the display behavior on V43.1 with the reported working V41 setup. The report names batocera.conf and the setOutput command as attempted troubleshooting, but does not identify a code entry point. Done means reproducing and resolving the black screen after restart with both DP and HDMI connected to the AMD R9 380x.

Written by the indexing model from the issue text.

Description

Batocera build version

x86_64-43.1-20260529

Your architecture

X86_64

Your Graphic Processor Unit(s) (GPU)

intel 4790K and AMD R9 380x

Issue description

When starting Batocera, a black screen appears after the startup screen.

Detailed reproduction steps

I installed the latest version of the official image (V43.1) on an X86 PC device, which has a graphics card with two video output ports, DP and HDMI. When using DP alone to input video, everything was normal. When I plugged in a landscape display for the HDMI port to display MARQUEE after booting up, it was still normal, and the secondary screen also displayed MARQUEE normally.
But when I restart my PC, it will enter a black screen state after the Batocera logo screen. At this time, I can enter the file system through another computer \ \ IP and also use SSH to input commands, but it takes several minutes to receive feedback after entering the SSH command.
Repeat several times, all after inserting both DP and HDMI into the monitor, restart and enter black screen state.

Details of any attempts to fix this yourself

Attempted to modify the resolution in batocella.conf, but failed to fix it;
The batocera solution setOutput command for SSH to set the input port could not be fixed;
Downgrade to install V41 version, fix the issue, can be used normally, dual screens display normally;
After installing version V41, the system's upgrade program automatically upgraded to version V43.1, but the problem persisted;
Upgrade to V44 test version, but the problem persists;
Turn off the integrated graphics card and secure boot in the motherboard BIOS, but the problem persists;
Replace with another computer for installation, with hardware of B350 motherboard+amd2200G, dual HDMI output, tested dual screens, completely normal.

Details of any modifications you have made to Batocera.

No modifications have been made

Logs and data

batocera-support-20260726065825.tar.gz

Dominant language
Python
Stars
3.2k
Forks
748
Avg merge
9h 51m
Merged PRs (30d)
170

Getting set up

This project ships no dev container, Dockerfile or contributing guide, so setting up is up to you: start from its README, and see our first-contribution guide for the general steps.

First steps

  1. Read the whole issue, then the project's contributing guide.
  2. Comment on the issue to say you are picking it up — it saves two people doing the same work.
  3. Fork the repository and make your change on a branch.
  4. Open a pull request that references the issue number.

More from batocera-linux/batocera.linux

All issues in batocera-linux/batocera.linux

Similar issues

More Python issues

Get new issues in your inbox

A short digest of beginner-friendly GitHub issues.