Batocera 44 black screen at boot on Anbernic VITA Pro
Maintainers usually reply within 1 day
Nobody has claimed this yet.
Assessment
- Difficulty
- 5/5
- Estimated time
- Over a week
- Newbie friendliness
- 12/100
- Issue type
- Bug
- Clarity
- Needs clarification
- Activity status
- Active
- Domain
- operating-systems
Research direction
The payload names no source file, test or entry point; the only concrete details are the RK3576 chipset, the Mali-G52 GPU and the image written with Raspberry Pi Imager. Reproducing needs the physical Anbernic VITA Pro, and the reporter has supplied no boot logs. Done would mean a boot log or a device-tree or display-driver change that gets the board past the black screen, which is hardware bring-up work rather than a starter task.
Written by the indexing model from the issue text.
Description
Batocera build version
Malachite
Your architecture
Chipset RockChip RK3576 CPU Cortex-A72
Your Graphic Processor Unit(s) (GPU)
Mali-G52 MC3
Issue description
I have a black screen after booting up the device.
Detailed reproduction steps
I installed Batocera on a micro SD using Raspberry Pi Imager.
I plugged the micro SD into my VITA Pro
When Batocera attempts to boot, I see a black screen.
I have no video or sound, just a black screen.
Details of any attempts to fix this yourself
No response
Details of any modifications you have made to Batocera.
None
Logs and data
No access to device
- Dominant language
- Python
- Stars
- 3.2k
- Forks
- 748
- Avg merge
- 9h 51m
- Merged PRs (30d)
- 170
Getting set up
This project ships no dev container, Dockerfile or contributing guide, so setting up is up to you: start from its README, and see our first-contribution guide for the general steps.
First steps
- Read the whole issue, then the project's contributing guide.
- Comment on the issue to say you are picking it up — it saves two people doing the same work.
- Fork the repository and make your change on a branch.
- Open a pull request that references the issue number.
More from batocera-linux/batocera.linux
-
Difficulty 2/5 1-3 hours Newbie friendliness 68/100
batocera-linux/batocera.linux#17423 ·
Maintainers usually reply within 1 day
-
Bump `ledspicer` to v0.7.8 - Corrects Bug with newer Ultimarc IPAC Ultimate boards w/ newer firmwareOpen
Difficulty 2/5 1-3 hours Newbie friendliness 65/100
batocera-linux/batocera.linux#17329 · 1 reaction ·
Maintainers usually reply within 1 day
-
evmapy dies at startup if an input device disappears during its device scan -> game runs with no hotkeys (Select+Start exit etc.)Possibly taken @jonathanroehm claimed this 30 days ago. Open
Difficulty 2/5 1-3 hours Newbie friendliness 78/100
batocera-linux/batocera.linux#17210 ·
Maintainers usually reply within 1 day
-
Difficulty 2/5 1-3 hours Newbie friendliness 65/100
batocera-linux/batocera.linux#16092 ·
Maintainers usually reply within 1 day
-
Difficulty 4/5 3-5 days Newbie friendliness 28/100
batocera-linux/batocera.linux#17421 ·
Maintainers usually reply within 1 day
All issues in batocera-linux/batocera.linux
Similar issues
-
Difficulty 2/5 1-3 hours Newbie friendliness 64/100
cal-itp/data-infra#5887 ·
Maintainers usually reply within 1 day
-
bug
Difficulty 2/5 1-3 hours Newbie friendliness 82/100
ranacseruet/vaice#139 ·
Maintainers usually reply within 1 day
-
numpy.bytes_ attributes are recorded as a truncated repr instead of their contentPossibly taken @JoeyTan21 claimed this today. Open
Difficulty 2/5 1-3 hours Newbie friendliness 72/100
Maintainers usually reply within 1 day
-
Difficulty 2/5 1-3 hours Newbie friendliness 62/100
-
Difficulty 2/5 1-3 hours Newbie friendliness 60/100
5hyuns/maya-workflow-kit-for-blender#440 ·
Maintainers usually reply within 1 day