NYGACN Fightstick recognized as multiple inputs
Maintainers usually reply within 1 day
Nobody has claimed this yet.
Assessment
- Difficulty
- 4/5
- Estimated time
- 3-5 days
- Newbie friendliness
- 25/100
- Issue type
- Bug
- Clarity
- Mostly clear
- Activity status
- Stale
- Tech stack
- linux
- Domain
- operating-systems
Research direction
Start by reproducing the issue on Batocera build 41-20250106 and use evtest to inspect the four SHANWAN input devices listed in the report. Compare which controls appear on each device and investigate how Batocera identifies this fightstick; done means it is recognized in a usable controller mode, with its joystick and buttons available as expected.
Written by the indexing model from the issue text.
Description
Batocera build version
41-20250106
Your architecture
X86_64 LENOVO LAPTOP
Your Graphic Processor Unit(s) (GPU)
iGPU
Issue description
Connecting fightstick results in the following popup:
SHANWAN Android Gamepad Connected
And evtest lists 4 different SHANWAN devices (when device is plugged in)
/dev/input/event12: SHANWAN Android Gamepad
/dev/input/event13: SHANWAN Android Gamepad System Control
/dev/input/event14: SHANWAN Android Gamepad Consumer Control
/dev/input/event15: SHANWAN Android Gamepad Keyboard
Joystick and buttons start and clear will be registered as part of a keyboard, while rest of the buttons are part of the gamepad.
This same fightstick, when connected to windows, has a functional MODE button, allowing a switch between xbox 360 controller and PS3/PC controller.
At some point I remember seeing a different popup (~PS/PC gamepad connected) and the fightstick was working perfectly. So batocera is capable of recognizing the device correctly, but since then I reinstalled batocera and I can't get it to work again, I don't think I did anything special that time I got it to work, I remember finding it strange it's a different message but I remapped it, played a bit then continued tinkering, reinstalled batocera later etc.
Details of any attempts to fix this yourself
I tried many different button combinations to try switching input mode from the fightstick, as well as many different options within batocera, but nothing worked.
- Dominant language
- Python
- Stars
- 3.2k
- Forks
- 748
- Avg merge
- 9h 51m
- Merged PRs (30d)
- 170
Getting set up
This project ships no dev container, Dockerfile or contributing guide, so setting up is up to you: start from its README, and see our first-contribution guide for the general steps.
First steps
- Read the whole issue, then the project's contributing guide.
- Comment on the issue to say you are picking it up — it saves two people doing the same work.
- Fork the repository and make your change on a branch.
- Open a pull request that references the issue number.
More from batocera-linux/batocera.linux
-
Difficulty 2/5 1-3 hours Newbie friendliness 68/100
batocera-linux/batocera.linux#17423 ·
Maintainers usually reply within 1 day
-
Bump `ledspicer` to v0.7.8 - Corrects Bug with newer Ultimarc IPAC Ultimate boards w/ newer firmwareOpen
Difficulty 2/5 1-3 hours Newbie friendliness 65/100
batocera-linux/batocera.linux#17329 · 1 reaction ·
Maintainers usually reply within 1 day
-
evmapy dies at startup if an input device disappears during its device scan -> game runs with no hotkeys (Select+Start exit etc.)Possibly taken @jonathanroehm claimed this 30 days ago. Open
Difficulty 2/5 1-3 hours Newbie friendliness 78/100
batocera-linux/batocera.linux#17210 ·
Maintainers usually reply within 1 day
-
Difficulty 2/5 1-3 hours Newbie friendliness 65/100
batocera-linux/batocera.linux#16092 ·
Maintainers usually reply within 1 day
-
Difficulty 5/5 Over a week Newbie friendliness 12/100
batocera-linux/batocera.linux#17422 ·
Maintainers usually reply within 1 day
All issues in batocera-linux/batocera.linux
Similar issues
-
Difficulty 2/5 1-3 hours Newbie friendliness 64/100
cal-itp/data-infra#5887 ·
Maintainers usually reply within 1 day
-
bug
Difficulty 2/5 1-3 hours Newbie friendliness 82/100
ranacseruet/vaice#139 ·
Maintainers usually reply within 1 day
-
numpy.bytes_ attributes are recorded as a truncated repr instead of their contentPossibly taken @JoeyTan21 claimed this today. Open
Difficulty 2/5 1-3 hours Newbie friendliness 72/100
Maintainers usually reply within 1 day
-
Difficulty 2/5 1-3 hours Newbie friendliness 62/100
-
Difficulty 2/5 1-3 hours Newbie friendliness 60/100
5hyuns/maya-workflow-kit-for-blender#440 ·
Maintainers usually reply within 1 day