Companion OPF models for PD initialization constraints
Maintainers usually reply within 1 day
@lukelowry is already working on this.
Since Nov 13, 2026.
Assessment
This issue has not been assessed yet.
Description
Description
We battled with the initialization of governors and exciters and how limit violations are handled during initialization. One of the reasons PowerWorld is configured to adjust limits is because the typical Power Flow formulation does not consider the steady state conditions of saturated exciters and governors (in general). If the user chooses not to adjust the limits, technically that means the power flow solution is not feasible and a different operating point needs to be found. The limits on exciters and governors are nonlinearly dependent on the operating point of the network, and this must be considered to solve the power flow.
To resolve this in GridKit, we will circumvent this by modeling the steady state constraints (i.e., limits!) in a sister/companion OptimalPowerFlow model that constrains the feasible solutions to consider the dynamic model steady state requirements.
e.g.
\begin{aligned}
0 &= -E_\mathrm{fd} +f(I_q, I_d, V_q, V_d) \\
V_R^{\min} &\le g(E_{fd}) \le V_R^{\max}
\end{aligned}
@pelesh If we do this well, we will be able to move the dependent initialization out of PhasorDynamics. Initialization order then becomes irrelevant.
- Dominant language
- C++
- Stars
- 27
- Forks
- 11
- Avg merge
- 2d 21h
- Merged PRs (30d)
- 15
Getting set up
Starts the project's dev container in your browser, under your own GitHub account.
- No Dockerfile or Docker Compose file
- Has a pull request template
- Read the contributing guide
First steps
- Read the whole issue, then the project's contributing guide.
- Comment on the issue to say you are picking it up — it saves two people doing the same work.
- Fork the repository and make your change on a branch.
- Open a pull request that references the issue number.
More from ORNL/GridKit
-
Difficulty 2/5 1-3 hours Newbie friendliness 88/100
ORNL/GridKit#587 · 1 reaction ·
Maintainers usually reply within 1 day
-
Extract CommonMath functionsPossibly taken @amandeep25100-a11y claimed this 6 days ago. Opencleanup
Difficulty 4/5 3-5 days Newbie friendliness 54/100
ORNL/GridKit#642 · 1 comment ·
Maintainers usually reply within 1 day
-
enhancement question
Difficulty 5/5 Over a week Newbie friendliness 30/100
ORNL/GridKit#624 · 2 comments · 2 reactions ·
Maintainers usually reply within 1 day
-
Add support for hierarchical modeling to the JSON format case file specificationsPossibly taken @abirchfield claimed this 33 days ago. Opendocumentation enhancement new case question
ORNL/GridKit#619 · 8 comments · 1 assignee ·
Maintainers usually reply within 1 day
-
Separate Rosenbrock integrator interface to GridKit from the integrator implementation.May be free again @alexander-novo claimed this 33 days ago, and no pull request is open. Openenhancement new solver
ORNL/GridKit#618 · 1 assignee ·
Maintainers usually reply within 1 day
Similar issues
-
Difficulty 2/5 1-3 hours Newbie friendliness 78/100
Maintainers usually reply within 1 day
-
useless statementOpen
Difficulty 1/5 Under an hour Newbie friendliness 86/100
Maintainers usually reply within 1 day
-
Difficulty 2/5 1-3 hours Newbie friendliness 74/100
-
Difficulty 2/5 1-3 hours Newbie friendliness 65/100
grizzlypeak3d/DJV#962 ·
-
Difficulty 2/5 1-3 hours Newbie friendliness 82/100
Maintainers usually reply within 1 day