Hacktoberfest 2026:维护者为十月标记出来的 issue,仍然开放、适合新手。 浏览 Hacktoberfest issue

How to configure `conda` to stop using `defaults` channels

未关闭
#59 0 条评论 0 个 reaction 已指派 0 人 在 GitHub 查看

还没有人认领这个 Issue。

评估

难度
2/5
预计耗时
1-3 小时
新手友好度
48/100
Issue 类型
文档
描述清晰度
基本清楚
活跃度
停滞
技术栈
anaconda
领域
documentation

调研方向

首先定位 repository 中关于 Conda 配置的文档入口;issue 中没有指定具体的文件或测试。检查列出的 conda 命令,并确保文档说明如何移除 defaults、设置 conda-forge、清理缓存以及验证生成的配置。

由索引模型根据 Issue 内容生成。

描述

By default, the defaults channel alias points to three sources at https://repo.anaconda.com, which are covered by the Anaconda, Inc., Terms of Service.

There is a good chance your configuration is using some or all of these channels. Here is how to fix that. Conda configuration is held in .condarc files at the user and folder levels (and possibly the system level, this is not commonly configured by default).

  1. Show default channels with conda config --show default_channels.
  2. Verify what channels are being used with conda config --show channels.
  3. Also try conda config --show-sources to know which .condarc files are configuring the channels.
  4. Use conda config --remove channels defaults to remove the defaults channel alias from your user-level config.
  5. Use conda config --append default_channels conda-forge. If that doesn't work, replace --append with --set.

At the end, when using conda config --show you should have no channels: key and you should have the following as part of your configuration.

default_channels:
  - conda-forge

Be sure to run conda clean --all --yes once, and pip cache purge in all relevant environments, including the base environment.

主要语言
Python
星标
1
派生
9
PR 合并指标
30 天内没有已合并 PR

环境准备

  • 没有 Dockerfile 或 Docker Compose 文件
  • 有 Pull Request 模板
  • 没有贡献指南

从这里开始

  1. 先读完整个 Issue,再读项目的贡献指南。
  2. 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
  3. Fork 仓库,在一个分支上完成修改。
  4. 提交 Pull Request,并在描述里引用这个 Issue 编号。

uabrc/devops-docs 的其他 Issue

查看 uabrc/devops-docs 的全部 Issue

相似的 Issue

更多 Python Issue

把新 issue 发到你的邮箱

精选适合新手参与的 GitHub issue 摘要。