HermitCrab analysis: defer the per-template clone in AnalysisAffixTemplateRule (1.054x wall-clock, not a step count)

未关闭
#586 1 条评论 0 个 reaction 已指派 0 人 在 GitHub 查看

维护者通常 1 天内回复

还没有人认领这个 Issue。

评估

难度
4/5
预计耗时
3-5 天
新手友好度
45/100
Issue 类型
重构
描述清晰度
基本清楚
活跃度
活跃
技术栈
csharp
领域
performance

调研方向

Start with the optimization record at docs/optimizations/deferred-template-clone.md and the disposition in docs/hermitcrab-perf-2026-09-disposition.md, then inspect AnalysisAffixTemplateRule.Apply and its emission points. First establish whether the target already clones lazily; measure steps or allocations and verify parity with a signature covering gloss, allomorph index, and syntactic feature structure. Done means the measured change is justified and parity holds.

由索引模型根据 Issue 内容生成。

描述

Hermit Crab performance

AnalysisAffixTemplateRule.Apply makes an internal engine clone of the input, freezes it once per template, and runs the slot DFS on the clone. The input is already frozen at every call site and slot rules never mutate it, so the DFS can run on the input directly. Only the two emission points that can pass the input through unchanged (ApplySlots terminal, ParallelApplySlots push) need a frozen clone. The traced path keeps the eager clone, because the trace manager stamps CurrentTrace onto the words it is given. The change is on the archived branch perf/hc-optimization-archive.

Measured. Clone-discard count (Amharic): 2,505 clones created, 1,659 discarded (66%). Wall-clock A/B on 45 Sena words, min of two interleaved rounds: 1.054x overall, 1.02x to 1.08x on heavy words. No step count was recorded. Parity was checked with WordAnalysisSignature, which on Sena compares morph counts only.

What a revival must do first. Re-measure in steps or allocations rather than wall time. Check parity with a gloss, allomorph-index and syntactic-feature-structure signature, not morph counts. The saving is allocation only, so a port that already clones lazily gains nothing.

Record: see the archived write-up below
Ledger: https://github.com/sillsdev/machine/pull/490#issuecomment-6701971116; disposition: https://github.com/sillsdev/machine/pull/490#issuecomment-6701971324
From #490 (closed).

主要语言
C#
星标
29
派生
16
平均合并
4 天 11 小时
30 天内合并 PR
14

环境准备

  • 没有 Dockerfile 或 Docker Compose 文件
  • 有 Pull Request 模板
  • 没有贡献指南

从这里开始

  1. 先读完整个 Issue,再读项目的贡献指南。
  2. 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
  3. Fork 仓库,在一个分支上完成修改。
  4. 提交 Pull Request,并在描述里引用这个 Issue 编号。

sillsdev/machine 的其他 Issue

查看 sillsdev/machine 的全部 Issue

相似的 Issue

更多 C# Issue

把新 issue 发到你的邮箱

精选适合新手参与的 GitHub issue 摘要。