JPEG dpi read from EXIF uses XResolution for both axes
维护者通常 1 天内回复
评估
调研方向
The issue identifies _read_dpi_from_exif as the entry point but gives no file path or test location. Read that function and the JPEG DPI tests, then run the relevant tests with EXIF XResolution 300 and YResolution 150 while JFIF is absent. Done means the reported DPI preserves both axes as (300.0, 150.0); linked PR #10334 is already open.
由索引模型根据 Issue 内容生成。
描述
What did you do?
I'm building an image-optimization tool that prepares screenshots and photos for PDFs: it picks the output format, carries the DPI so pages place at the right size, and checks that lossless steps keep every pixel. Its test suite generates each input type Pillow opens and runs it through the tool, which is where this came up. A JPEG whose resolution is only in EXIF, XResolution 300 and YResolution 150, came back square.
import io
from PIL import Image
exif = Image.Exif()
exif[0x011A] = 300.0 # XResolution
exif[0x011B] = 150.0 # YResolution
exif[0x0128] = 2 # ResolutionUnit: inches
buf = io.BytesIO()
Image.new("RGB", (16, 16)).save(buf, "JPEG", exif=exif)
# Pillow writes a JFIF APP0 segment with units 0; drop it so DPI must come from EXIF
data = buf.getvalue()
app0_length = int.from_bytes(data[4:6], "big")
assert data[2:4] == b"\xff\xe0"
data = data[:2] + data[4 + app0_length:]
with Image.open(io.BytesIO(data)) as im:
print(im.info["dpi"])
What did you expect to happen?
(300.0, 150.0)
What actually happened?
(300.0, 300.0). _read_dpi_from_exif reads only 0x011A (XResolution) and sets (dpi, dpi), so YResolution never applies. The JFIF and TIFF paths report the two axes separately.
Related: #10332 (TIFF dpi with no resolution tags).
What are your OS, Python and Pillow versions?
- OS: Ubuntu 24.04 (Linux x86_64)
- Python: 3.13.13
- Pillow: 13.0.0 (also reproduces on 12.3.0)
--------------------------------------------------------------------
Pillow 13.0.0
Python 3.13.13 (main, May 10 2026, 19:26:54) [Clang 22.1.3 ]
--------------------------------------------------------------------
Python executable is ~/.venv/bin/python
Environment Python files loaded from ~/.venv
System Python files loaded from ~/.local/share/uv/python/cpython-3.13.13-linux-x86_64-gnu
--------------------------------------------------------------------
Python Pillow modules loaded from ~/.venv/lib/python3.13/site-packages/PIL
Binary Pillow modules loaded from ~/.venv/lib/python3.13/site-packages/PIL
--------------------------------------------------------------------
--- PIL CORE support ok, compiled for 13.0.0
--- TKINTER support ok, loaded 9.0
--- FREETYPE2 support ok, loaded 2.14.3
--- LITTLECMS2 support ok, loaded 2.19
--- WEBP support ok, loaded 1.6.0
--- AVIF support ok, loaded 1.4.2
--- JPEG support ok, compiled for libjpeg-turbo 3.2.0
--- OPENJPEG (JPEG2000) support ok, loaded 2.5.4
--- ZLIB (PNG/ZIP) support ok, loaded 1.3, compiled for zlib-ng 2.3.3
--- LIBTIFF support ok, loaded 4.7.2
--- RAQM (Bidirectional Text) support ok, loaded 0.11.0, fribidi 1.0.13, harfbuzz 14.5.0
*** LIBIMAGEQUANT (Quantization method) support not installed
--- XCB (X protocol) support ok
--------------------------------------------------------------------
- 主要语言
- Python
- 星标
- 13.9k
- 派生
- 2.6k
- 平均合并
- 1 天 7 小时
- 30 天内合并 PR
- 174
环境准备
- 没有 Dockerfile 或 Docker Compose 文件
- 有 Pull Request 模板
- 阅读贡献指南
从这里开始
- 先读完整个 Issue，再读项目的贡献指南。
- 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
- Fork 仓库，在一个分支上完成修改。
- 提交 Pull Request，并在描述里引用这个 Issue 编号。
python-pillow/Pillow 的其他 Issue
-
TIFF without XResolution/YResolution reports dpi (1, 1)可能已有人在做 @brettdavies 于 1 天前认领。 未关闭🤖-assisted TIFF
难度 2/5 1-3 小时 新手友好度 75/100
python-pillow/Pillow#10332 · 2 条评论 ·
维护者通常 1 天内回复
-
Warn that pre-applying arabic_reshaper + python-bidi corrupts text on a Raqm build可能已有人在做 @Syamjith-NK 于 60 天前认领。 未关闭Documentation Font Rendering PNG Third Party Framework
难度 2/5 1-3 小时 新手友好度 78/100
python-pillow/Pillow#9907 · 2 条评论 ·
维护者通常 1 天内回复
-
Image.putpixel incorrectly labels supported arguments in type annotations可能已有人在做 @radarhere 于 188 天前认领。 未关闭PNG
难度 2/5 1-3 小时 新手友好度 70/100
python-pillow/Pillow#9584 · 1 条评论 ·
维护者通常 1 天内回复
-
JPEG saved with keep_rgb=True and dpi reopens with incorrect colors可能已有人在做 @Muguett-DBY 今天认领。 未关闭🤖-assisted JPEG
难度 4/5 1-2 天 新手友好度 25/100
python-pillow/Pillow#10344 ·
维护者通常 1 天内回复
-
16-bit PNG tRNS key: convert("RGBA") misses the keyed pixel and makes another transparent可能已有人在做 关联的 PR 仍在进行中或已合并。 未关闭Conversion
难度 3/5 1-2 天 新手友好度 58/100
python-pillow/Pillow#10330 · 3 条评论 ·
维护者通常 1 天内回复
查看 python-pillow/Pillow 的全部 Issue
相似的 Issue
-
难度 1/5 1 小时以内 新手友好度 72/100
MIT-LCP/wfdb-python#590 ·
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 77/100
pollen-robotics/reachy_mini#1517 ·
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 69/100
NRLMMD-GEOIPS/pluginify#41 ·
-
难度 2/5 1-3 小时 新手友好度 67/100
scverse/spatialdata#1293 · 1 条评论 ·
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 78/100
UKGovernmentBEIS/inspect_evals#2788 ·
维护者通常 1 天内回复